Hi Adnan, Sorry for the delay in response, this email fell through the cracks. Is this still an outstanding issue for you?
Regards, Nate Temple On Wed, Sep 11, 2019 at 8:33 AM Quadri,Adnan via USRP-users < usrp-users@lists.ettus.com> wrote: > Hello, > > We were working on the Schimdl Cox and OFDM Equalizer blocks. > > We updated to the recent version of UHD and did the installation manually. > There is a rfnoc installation as well, done earlier. (UHD in rfnoc is 4.0 > but the new one is 3.14) > > With the newly installed UHD and few changes, we could build FPGA image > for Schmidl Cox and OFDM Equalizer. > > However, when we run the gnuradio flowgraph (which contains blocks > required to setup a OFDM receiver), we get the following RunTime error - > > *RuntimeError: RuntimeError: Expected FPGA compatibility number 36, but > got 35:* > > *The FPGA image on your device is not compatible with this host code > build. * > > *Download the appropriate FPGA images for this version of UHD. * > > *Please run: * > > > * "/home/sdr/rfnoc/lib/uhd/utils/uhd_images_downloader.py" * > > > *Then burn a new image to the on-board flash storage of your * > > *USRP X3xx device using the image loader utility. Use this command: * > > > *"/home/sdr/rfnoc/bin/uhd_image_loader" > --args="type=x300,addr=192.168.10.2" * > > > Should I uninstall rfnoc setup. I have already downloaded the images in > the newly installed UHD directory. > > I built the image using uhd_image_builder and image_loader from the newly > installed UHD directory. For environment setup for the new UHD I used the > setup_env.sh script from rfnoc folder. > > > Thanks, > Adnan > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com