when I want to build an FPGA source for x300 (In Ubuntu 20.04, Gnuradio 3.8.1, uhd-4.1.0.5) I used the below command:
source setupenv.sh --vivado-path=/home/sp/xilinx/Vivado make X300_HG But I have been faced with these errors... can any idea for solving this problem? [00:00:23] Starting Synthesis Command ERROR: [Synth 8-439] module 'rfnoc_block_fft' not found [/home/sp/Documents/uhd-4.1.0.5/fpga/usrp3/top/x300/x300_rfnoc_image_core.v:1354] ERROR: [Synth 8-6156] failed synthesizing module 'rfnoc_image_core' [/home/sp/Documents/uhd-4.1.0.5/fpga/usrp3/top/x300/x300_rfnoc_image_core.v:24] ERROR: [Synth 8-6156] failed synthesizing module 'bus_int' [/home/sp/Documents/uhd-4.1.0.5/fpga/usrp3/top/x300/bus_int.v:9] ERROR: [Synth 8-6156] failed synthesizing module 'x300_core' [/home/sp/Documents/uhd-4.1.0.5/fpga/usrp3/top/x300/x300_core.v:9] ERROR: [Synth 8-6156] failed synthesizing module 'x300' [/home/sp/Documents/uhd-4.1.0.5/fpga/usrp3/top/x300/x300.v:20] ERROR: [Common 17-69] Command failed: Synthesis failed - please see the console or run log file for details [00:03:31] Current task: Synthesis +++ Current Phase: Starting [00:03:31] Current task: Synthesis +++ Current Phase: Finished [00:03:31] Process terminated. Status: Failure ======================================================== Warnings: 357 Critical Warnings: 1 Errors: 6 make[1]: *** [Makefile.x300.inc:127: bin] Error 1 make[1]: Leaving directory '/home/sp/Documents/uhd-4.1.0.5/fpga/usrp3/top/x300' make: *** [Makefile:90: X300_HG] Error 2
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
