So, I'm trying to get a computer working, and I discovered that my primary problems were due to the fact that I needed to install the motherboard drivers... (yes... I'm new to this...) So, I went to nvidia.com, and downloaded the driver I needed (NVIDIA_nforce-1.0-0261.rh80up_2.4.18_14.athlon.rpm)... So, now red hat recognizes that I have an ethernet card, but when I try to activate it, it just sits there, and then eventually tells me "Cannot activate network device eth0"... I checked to ensure that I had the ethernet cable connected, and that I had successfully ordered network access from BYU... (on-campus ethernet)... I posted to the newbies list, and following that, adjusted my /etc/modules.conf file, and ran lsmod to ensure that nvnet is listed... I don't know what else the problem could be... Are there any other recommendations out there? ~Erin
===== http://www.userfriendly.org __________________________________ Do you Yahoo!? New Yahoo! Photos - easier uploading and sharing. http://photos.yahoo.com/ ____________________ BYU Unix Users Group http://uug.byu.edu/ ___________________________________________________________________ List Info: http://uug.byu.edu/cgi-bin/mailman/listinfo/uug-list
