It looks like you're close. DHCP on the private host-only network isn't
working. The VM that VCL created was assigned the correct MAC addresses:
|15920|53:53|reload| : "ethernet0.address" => "00:50:56:1a:01:01",
|15920|53:53|reload| : "ethernet1.address" => "00:50:56:1a:01:02",
I think it may be failing because VMware installed and started its own
DHCP service when the host-only network was configured. Run this command:
ps -ef | grep dhcp
Do you see 2 processes that look like this?:
/usr/sbin/dhcpd vmnet1
/usr/bin/vmnet-dhcpd -cf /etc/vmware/vmnet1/dhcpd/dhcpd.conf -lf
/etc/vmware/vmnet1/dhcpd/dhcpd.leases -pf
/var/run/vmnet-dhcpd-vmnet1.pid vmnet1
If you do see the vmnet-dhcpd process along with dhcpd, try killing the
vmnet-dhcpd process. Hopefully this allows the normal dhcpd process to
respond to the VM's DHCP request.
The main way to debug DHCP problems is to look at /var/log/messages.
Try running the following command:
tail -f /var/log/messages | grep -i dhcp
Then reboot the VM that VCL created. If the VM's DHCP request is
getting to the dhcpd service running on the management node then you
should see output containing the private MAC address: 00:50:56:1a:01:01.
The public IP address isn't necessarily a problem. Once the private
interface gets an IP address and responds to SSH, vcld will SSH in and
configure the public interface with a static address if you have
configured the management node and IP address for the VM in the VCL
database accordingly.
-Andy
On 4/11/2011 1:41 PM, Tyler Hardesty wrote:
Ok, sorry to be such a bug with the same problem but I've done
everything exactly how it is in the link that you provided and after
this image is created, it still fails to be reserved saying it's not
responding to ssh. Here are some of my configs:
[root@vcl ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1B:63:99:DA:B6
inet addr:144.38.205.200 <tel:144.38.205.200>
Bcast:144.38.205.255 <tel:144.38.205.255> Mask:255.255.255.128
inet6 addr: fe80::21b:63ff:fe99:dab6/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:26728797 errors:0 dropped:0 overruns:0 frame:0
TX packets:14037294 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3637195452 (3.3 GiB) TX bytes:2717331485 (2.5 GiB)
Interrupt:185
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:714243376 errors:0 dropped:0 overruns:0 frame:0
TX packets:714243376 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2461321418 (2.2 GiB) TX bytes:2461321418 (2.2 GiB)
vmnet1 Link encap:Ethernet HWaddr 00:50:56:C0:00:01
inet addr:192.168.0.1 Bcast:192.168.255.255 Mask:255.255.0.0
inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4237 errors:0 dropped:0 overruns:0 frame:0
TX packets:6875 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[root@vcl ~]# cat /etc/dhcpd.conf
#
# DHCP Server Configuration file.
# see /usr/share/doc/dhcp*/dhcpd.conf.sample
#
ddns-update-style none; shared-network vmnet1 {
subnet 192.168.0.0 netmask 255.255.0.0 {
ignore unknown-clients;
option routers 192.168.0.1;
host vm-1 {
option host-name "vm-1";
hardware ethernet 00:50:56:1a:01:01;
fixed-address 192.168.1.1;
filename "/tftpboot/pxelinux.0";
option dhcp-server-identifier 127.0.0.1;
next-server 127.0.0.1;
}
host vm-2 {
option host-name "vm-2";
hardware ethernet 00:50:56:1a:01:03;
fixed-address 192.168.1.2;
filename "/tftpboot/pxelinux.0";
option dhcp-server-identifier 127.0.0.1;
next-server 127.0.0.1;
}
host vm-3 {
option host-name "vm-3";
hardware ethernet 00:50:56:1a:01:05;
fixed-address 192.168.1.3;
filename "/tftpboot/pxelinux.0";
option dhcp-server-identifier 127.0.0.1;
next-server 127.0.0.1;
}
.........
.........
}
}
When I set up the VM Base machines, I followed the instructions on the
site with network adapter 1 set to HostOnly and network adapter 2 set to
Bridged... the host only network gets automatically configured with a
192.168.128.x ip so I statically set it to 192.168.1.x to match what's
in the database and I statically set network adapter 2 with
144.38.205.201 <tel:144.38.205.201> ..... after the image is captured
and it tries to make a reservation I notice that the network adapter 1
has an IP of 169.254.212.140 (or 169.254.xxx.xxx) and adapter 2 has an
IP of 0.0.0.0 ... Does that even matter? Here are some snippets of my
log file (my full log file can be found here -
http://tylerhardesty.info/it4600/reslog.txt and again, sorry for being
so troublesome but thanks for all the help!!!!):
2011-04-11
01:58:11|15920|53:53|reload|VMware.pm:prepare_vmx(1699)|created
temporary vmx file: /tmp/vm-1_34-v0.vmx
2011-04-11
01:58:12|15920|53:53|reload|Linux.pm:create_directory(1502)|directory
already exists on localvmhost: '/var/lib/vmware/Virtual Machines/vm-1_34-v0'
2011-04-11
01:58:12|15920|53:53|reload|utils.pm:run_scp_command(5584)|attempting to
copy file via SCP: '/tmp/vm-1_34-v0.vmx' -->
'localvmhost:"/var/lib/vmware/Virtual\ Machines/vm-1_34-v0/vm-1_34-v0.vmx"'
2011-04-11
01:58:12|15920|53:53|reload|utils.pm:run_scp_command(5620)|copied file
via SCP: '/tmp/vm-1_34-v0.vmx' -->
'localvmhost:"/var/lib/vmware/Virtual\ Machines/vm-1_34-v0/vm-1_34-v0.vmx"'
2011-04-11
01:58:12|15920|53:53|reload|Linux.pm:copy_file_to(1837)|copied file from
management node to localvmhost: '/tmp/vm-1_34-v0.vmx' -->
localvmhost:'/var/lib/vmware/Virtual Machines/vm-1_34-v0/vm-1_34-v0.vmx'
2011-04-11
01:58:12|15920|53:53|reload|VMware.pm:prepare_vmx(1711)|created vmx file
on VM host: /var/lib/vmware/Virtual Machines/vm-1_34-v0/vm-1_34-v0.vmx
2011-04-11
01:58:12|15920|53:53|reload|VMware.pm:prepare_vmx(1714)|deleted
temporary vmx file: /tmp/vm-1_34-v0.vmx
2011-04-11
01:58:12|15920|53:53|reload|utils.pm:insertloadlog(3875)|inserted
computer=8, vmsetupconfig, prepared vmx file
2011-04-11
01:58:12|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(193)|vim-cmd call
count: 6 (vmsvc/getallvms)
2011-04-11 01:58:13|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 01:58:13
2011-04-11
01:58:14|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(208)|executed
command on VM host localvmhost: vmware-vim-cmd vmsvc/getallvms
2011-04-11
01:58:14|15920|53:53|reload|VIM_SSH.pm:get_registered_vms(835)|found 0
registered VMs
2011-04-11
01:58:14|15920|53:53|reload|VMware.pm:is_vm_registered(3738)|VM is not
registered: '/var/lib/vmware/Virtual Machines/vm-1_34-v0/vm-1_34-v0.vmx'
2011-04-11
01:58:14|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(193)|vim-cmd call
count: 7 (solo/registervm "/var/lib/vmware/Virtual\
Machines/vm-1_34-v0/vm-1_34-v0.vmx")
2011-04-11
01:58:16|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(208)|executed
command on VM host localvmhost: vmware-vim-cmd solo/registervm
"/var/lib/vmware/Virtual\ Machines/vm-1_34-v0/vm-1_34-v0.vmx"
2011-04-11
01:58:16|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(193)|vim-cmd call
count: 8 (vmsvc/getallvms)
2011-04-11
01:58:18|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(208)|executed
command on VM host localvmhost: vmware-vim-cmd vmsvc/getallvms
2011-04-11
01:58:18|15920|53:53|reload|VIM_SSH.pm:get_registered_vms(835)|found 1
registered VMs
2011-04-11
01:58:18|15920|53:53|reload|VMware.pm:is_vm_registered(3733)|VM is
registered: /var/lib/vmware/Virtual Machines/vm-1_34-v0/vm-1_34-v0.vmx
2011-04-11
01:58:18|15920|53:53|reload|VIM_SSH.pm:vm_register(1105)|registered VM:
'/var/lib/vmware/Virtual\ Machines/vm-1_34-v0/vm-1_34-v0.vmx'
2011-04-11
01:58:18|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(193)|vim-cmd call
count: 9 (vmsvc/getallvms)
2011-04-11 01:58:18|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 01:58:18
2011-04-11
01:58:20|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(208)|executed
command on VM host localvmhost: vmware-vim-cmd vmsvc/getallvms
2011-04-11
01:58:20|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(193)|vim-cmd call
count: 10 (vmsvc/power.on 336)
2011-04-11
01:58:21|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(208)|executed
command on VM host localvmhost: vmware-vim-cmd vmsvc/power.on 336
2011-04-11
01:58:21|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(193)|vim-cmd call
count: 11 (vmsvc/getallvms)
2011-04-11 01:58:23|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 01:58:23
2011-04-11
01:58:24|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(208)|executed
command on VM host localvmhost: vmware-vim-cmd vmsvc/getallvms
2011-04-11
01:58:24|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(193)|vim-cmd call
count: 12 (vmsvc/get.tasklist 336)
2011-04-11
01:58:26|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(208)|executed
command on VM host localvmhost: vmware-vim-cmd vmsvc/get.tasklist 336
2011-04-11
01:58:26|15920|53:53|reload|VIM_SSH.pm:_wait_for_task(748)|checking
status of task: haTask-336-vim.VirtualMachine.powerOn-66587404
2011-04-11
01:58:26|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(193)|vim-cmd call
count: 13 (vimsvc/task_info haTask-336-vim.VirtualMachine.powerOn-66587404)
2011-04-11
01:58:27|15920|53:53|reload|VIM_SSH.pm:_run_vim_cmd(208)|executed
command on VM host localvmhost: vmware-vim-cmd vimsvc/task_info
haTask-336-vim.VirtualMachine.powerOn-66587404
2011-04-11
01:58:27|15920|53:53|reload|VIM_SSH.pm:_wait_for_task(771)|task
completed successfully: haTask-336-vim.VirtualMachine.powerOn-66587404
2011-04-11
01:58:27|15920|53:53|reload|VIM_SSH.pm:vm_power_on(970)|powered on VM:
/var/lib/vmware/Virtual Machines/vm-1_34-v0/vm-1_34-v0.vmx
2011-04-11
01:58:27|15920|53:53|reload|utils.pm:insertloadlog(3875)|inserted
computer=8, startvm, registered and powered on vm-1
2011-04-11
01:58:27|15920|53:53|reload|Windows.pm:post_load(583)|beginning Windows
post-load tasks on vm-1
2011-04-11 01:58:28|15920|53:53|reload|OS.pm:is_ssh_responding(386)|vm-1
is NOT responding to SSH, ports 22 or 24 are both closed
2011-04-11
01:58:28|15920|53:53|reload|OS.pm:wait_for_response(457)|waiting 15
seconds for vm-1 to boot
2011-04-11 01:58:28|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 01:58:28
2011-04-11 01:58:33|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 01:58:33
2011-04-11 01:58:38|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 01:58:38
2011-04-11
01:58:43|15920|53:53|reload|OS.pm:wait_for_response(459)|waited 15
seconds for vm-1 to boot
2011-04-11
01:58:43|15920|53:53|reload|OS.pm:wait_for_response(463)|waiting for
vm-1 to respond to SSH, maximum of 900 seconds
2011-04-11
01:58:43|15920|53:53|reload|Module.pm:code_loop_timeout(711)|waiting for
vm-1 to respond to SSH, maximum of 900 seconds
2011-04-11
01:58:43|15920|53:53|reload|Module.pm:code_loop_timeout(728)|attempt 1:
waiting for vm-1 to respond to SSH
2011-04-11 01:58:43|15920|53:53|reload|OS.pm:is_ssh_responding(386)|vm-1
is NOT responding to SSH, ports 22 or 24 are both closed
2011-04-11
01:58:43|15920|53:53|reload|Module.pm:code_loop_timeout(724)|attempt 1:
code returned false, seconds elapsed/remaining: 0/900, sleeping for 8
seconds
2011-04-11 01:58:43|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 01:58:43
2011-04-11 01:58:49|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 01:58:48
2011-04-11
01:58:51|15920|53:53|reload|Module.pm:code_loop_timeout(728)|attempt 2:
waiting for vm-1 to respond to SSH
2011-04-11 01:58:52|15920|53:53|reload|OS.pm:is_ssh_responding(386)|vm-1
is NOT responding to SSH, ports 22 or 24 are both closed
2011-04-11
01:58:52|15920|53:53|reload|Module.pm:code_loop_timeout(724)|attempt 2:
code returned false, seconds elapsed/remaining: 9/891, sleeping for 8
seconds
2011-04-11 01:58:54|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 01:58:54
2011-04-11 01:58:59|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 01:58:59
2011-04-11
01:59:00|15920|53:53|reload|Module.pm:code_loop_timeout(728)|attempt 3:
waiting for vm-1 to respond to SSH
2011-04-11 01:59:00|15920|53:53|reload|OS.pm:is_ssh_responding(386)|vm-1
is NOT responding to SSH, ports 22 or 24 are both closed
2011-04-11
01:59:00|15920|53:53|reload|Module.pm:code_loop_timeout(724)|attempt 3:
code returned false, seconds elapsed/remaining: 17/883, sleeping for 8
seconds
2011-04-11 01:59:04|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 01:59:04
2011-04-11
01:59:08|15920|53:53|reload|Module.pm:code_loop_timeout(728)|attempt 4:
waiting for vm-1 to respond to SSH
2011-04-11 01:59:09|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 01:59:09
.............................
.............................
2011-04-11
02:13:41|15920|53:53|reload|Module.pm:code_loop_timeout(728)|attempt
107: waiting for vm-1 to respond to SSH
2011-04-11 02:13:41|15920|53:53|reload|OS.pm:is_ssh_responding(386)|vm-1
is NOT responding to SSH, ports 22 or 24 are both closed
2011-04-11
02:13:41|15920|53:53|reload|Module.pm:code_loop_timeout(724)|attempt
107: code returned false, seconds elapsed/remaining: 898/2, sleeping for
8 seconds
2011-04-11 02:13:44|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 02:13:44
2011-04-11 02:13:49|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 02:13:49
2011-04-11
02:13:49|15920|53:53|reload|Module.pm:code_loop_timeout(728)|attempt
108: waiting for vm-1 to respond to SSH
2011-04-11 02:13:50|15920|53:53|reload|OS.pm:is_ssh_responding(386)|vm-1
is NOT responding to SSH, ports 22 or 24 are both closed
2011-04-11
02:13:50|15920|53:53|reload|Module.pm:code_loop_timeout(736)|waiting for
vm-1 to respond to SSH, code did not return true after waiting 900 seconds
|15920|53:53|reload| ---- WARNING ----
|15920|53:53|reload| 2011-04-11
02:13:50|15920|53:53|reload|OS.pm:wait_for_response(465)|failed to
connect to vm-1 via SSH after 900 seconds
|15920|53:53|reload| ( 0) OS.pm, wait_for_response (line: 465)
|15920|53:53|reload| (-1) Windows.pm, post_load (line: 591)
|15920|53:53|reload| (-2) VMware.pm, load (line: 415)
|15920|53:53|reload| (-3) new.pm <http://new.pm>, reload_image (line: 687)
|15920|53:53|reload| (-4) new.pm <http://new.pm>, process (line: 282)
|15920|53:53|reload| (-5) vcld, make_new_child (line: 568)
|15920|53:53|reload| ---- WARNING ----
|15920|53:53|reload| 2011-04-11
02:13:50|15920|53:53|reload|Windows.pm:post_load(592)|vm-1 never
responded to SSH
|15920|53:53|reload| ( 0) Windows.pm, post_load (line: 592)
|15920|53:53|reload| (-1) VMware.pm, load (line: 415)
|15920|53:53|reload| (-2) new.pm <http://new.pm>, reload_image (line: 687)
|15920|53:53|reload| (-3) new.pm <http://new.pm>, process (line: 282)
|15920|53:53|reload| (-4) vcld, make_new_child (line: 568)
|15920|53:53|reload| (-5) vcld, main (line: 346)
|15920|53:53|reload| ---- WARNING ----
|15920|53:53|reload| 2011-04-11
02:13:50|15920|53:53|reload|VMware.pm:load(419)|failed to perform OS
post-load tasks on VM vm-1 on VM host: localvmhost
|15920|53:53|reload| ( 0) VMware.pm, load (line: 419)
|15920|53:53|reload| (-1) new.pm <http://new.pm>, reload_image (line: 687)
|15920|53:53|reload| (-2) new.pm <http://new.pm>, process (line: 282)
|15920|53:53|reload| (-3) vcld, make_new_child (line: 568)
|15920|53:53|reload| (-4) vcld, main (line: 346)
|15920|53:53|reload| ---- WARNING ----
|15920|53:53|reload| 2011-04-11
02:13:50|15920|53:53|reload|new.pm:reload_image(692)|vmwarewinxp-xp134-v0 failed
to load on vm-1, returning
|15920|53:53|reload| ( 0) new.pm <http://new.pm>, reload_image (line: 692)
|15920|53:53|reload| (-1) new.pm <http://new.pm>, process (line: 282)
|15920|53:53|reload| (-2) vcld, make_new_child (line: 568)
|15920|53:53|reload| (-3) vcld, main (line: 346)
2011-04-11
02:13:50|15920|53:53|reload|utils.pm:insertloadlog(3875)|inserted
computer=8, loadimagefailed, vmwarewinxp-xp134-v0 failed to load on vm-1
|15920|53:53|reload| ---- WARNING ----
|15920|53:53|reload| 2011-04-11
02:13:50|15920|53:53|reload|new.pm:process(329)|failed to load vm-1 with
vmwarewinxp-xp134-v0
|15920|53:53|reload| ( 0) new.pm <http://new.pm>, process (line: 329)
|15920|53:53|reload| (-1) vcld, make_new_child (line: 568)
|15920|53:53|reload| (-2) vcld, main (line: 346)
2011-04-11
02:13:50|15920|53:53|reload|DataStructure.pm:get_computer_state_name(2299)|attempting
to retrieve current state of computer vm-1 from the database
2011-04-11
02:13:50|15920|53:53|reload|DataStructure.pm:get_computer_state_name(2330)|retrieved
current state of computer vm-1 from the database: reloading
2011-04-11
02:13:50|15920|53:53|reload|DataStructure.pm:_automethod(835)|data
structure updated:
$self->request_data->{reservation}{53}{computer}{state}{name}
|15920|53:53|reload| computer_state_name = reloading
2011-04-11
02:13:50|15920|53:53|reload|DataStructure.pm:get_computer_private_ip_address(1582)|attempting
to retrieve private IP address for computer: vm-1
2011-04-11
02:13:50|15920|53:53|reload|DataStructure.pm:get_computer_private_ip_address(1586)|retrieved
contents of /etc/hosts on this management node, contains 16 lines
2011-04-11
02:13:50|15920|53:53|reload|DataStructure.pm:get_computer_private_ip_address(1639)|returning
IP address from /etc/hosts file: 192.168.1.1
2011-04-11
02:13:50|15920|53:53|reload|utils.pm:is_inblockrequest(6147)|zero rows
were returned from database select
2011-04-11
02:13:50|15920|53:53|reload|DataStructure.pm:get_image_affiliation_name(2029)|image
owner id: 1
2011-04-11 02:13:50|15920|53:53|reload|utils.pm:getnewdbh(2709)|database
requested (information_schema) does not match handle stored in $ENV{dbh}
(vcl:127.0.0.1)
2011-04-11 02:13:50|15920|53:53|reload|utils.pm:getnewdbh(2760)|database
handle stored in $ENV{dbh}
2011-04-11
02:13:50|15920|53:53|reload|DataStructure.pm:retrieve_user_data(1353)|attempting
to retrieve and store data for user: user.id <http://user.id> = '1'
2011-04-11 02:13:50|15920|53:53|reload|utils.pm:getnewdbh(2709)|database
requested (vcl) does not match handle stored in $ENV{dbh}
(information_schema:127.0.0.1)
2011-04-11 02:13:50|15920|53:53|reload|utils.pm:getnewdbh(2760)|database
handle stored in $ENV{dbh}
2011-04-11
02:13:50|15920|53:53|reload|DataStructure.pm:retrieve_user_data(1416)|data
has been retrieved for user: admin (id: 1)
/etc/mail/submit.cf <http://submit.cf>: line 544: fileclass: cannot open
'/etc/mail/trusted-users': Group writable directory
2011-04-11 02:13:50|15920|53:53|reload|utils.pm:mail(1268)|SUCCESS --
Sending mail To: tharde...@tylerhardesty.info
<mailto:tharde...@tylerhardesty.info>, PROBLEM --
53:53|reload|State.pm|vm-1>localvmhost|vmwarewinxp-xp134-v0|vclreload
|15920|53:53|reload| ---- CRITICAL ----
|15920|53:53|reload| 2011-04-11
02:13:50|15920|53:53|reload|State.pm:reservation_failed(223)|reservation
failed on vm-1: process failed after trying to load or make available
|15920|53:53|reload| ( 0) State.pm, reservation_failed (line: 223)
|15920|53:53|reload| (-1) new.pm <http://new.pm>, process (line: 332)
|15920|53:53|reload| (-2) vcld, make_new_child (line: 568)
|15920|53:53|reload| (-3) vcld, main (line: 346)
2011-04-11
02:13:50|15920|53:53|reload|utils.pm:insertloadlog(3875)|inserted
computer=8, failed, process failed after trying to load or make available
2011-04-11
02:13:50|15920|53:53|reload|State.pm:reservation_failed(226)|inserted
computerloadlog entry
2011-04-11
02:13:50|15920|53:53|reload|utils.pm:update_computer_state(2033)|computer 8
state updated to: failed
2011-04-11
02:13:50|15920|53:53|reload|State.pm:reservation_failed(245)|computer
vm-1 (8) state set to failed
2011-04-11
02:13:50|15920|53:53|reload|utils.pm:update_request_state(1991)|request
53 state updated to: failed, laststate to: image
2011-04-11
02:13:50|15920|53:53|reload|State.pm:reservation_failed(258)|set request
state to 'failed'/'image'
2011-04-11
02:13:50|15920|53:53|reload|utils.pm:is_inblockrequest(6147)|zero rows
were returned from database select
2011-04-11
02:13:50|15920|53:53|reload|State.pm:reservation_failed(276)|vm-1 is NOT
in blockcomputers table
2011-04-11
02:13:50|15920|53:53|reload|State.pm:reservation_failed(279)|exiting 1
2011-04-11 02:13:50|15920|53:53|reload|State.pm:DESTROY(839)|VCL::new
destructor called, address: 9eacb6c
2011-04-11
02:13:50|15920|53:53|reload|utils.pm:delete_computerloadlog_reservation(6726)|removing
computerloadlog entries matching loadstate = begin
2011-04-11
02:13:50|15920|53:53|reload|utils.pm:delete_computerloadlog_reservation(6773)|deleted
rows from computerloadlog for reservation id=53
2011-04-11 02:13:50|15920|53:53|reload|State.pm:DESTROY(858)|number of
database handles state process created: 3
2011-04-11 02:13:50|15920|53:53|reload|State.pm:DESTROY(886)|VCL::new
process duration: 957 seconds
2011-04-11 02:13:50|15920|53:53|reload|VIM_SSH.pm:DESTROY(1685)|vim-cmd
call count: 13
2011-04-11 02:13:50|30717|vcld:REAPER(718)|VCL process exited for
reservation 53, PID: 15920, signal: CHLD
2011-04-11 02:13:50|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 02:13:50
2011-04-11 02:13:50|30717|53:53|failed|vcld:main(252)|request deleted
2011-04-11 02:13:55|30717|vcld:main(167)|lastcheckin time updated for
management node 1: 2011-04-11 02:13:55
On Thu, Apr 7, 2011 at 2:24 PM, Andy Kurth <andy_ku...@ncsu.edu
<mailto:andy_ku...@ncsu.edu>> wrote:
DHCP is a requirement for the private interface but you should still
be able to get it to work. I have configured similar installations
before. For the private network, you'll want to configure a VMware
host-only network, not a bridged network.
I created updated instructions to configure a standalone environment
using VMware Server 2.0:
https://cwiki.apache.org/confluence/display/VCL/Configuring+a+Standalone+VCL+Environment+using+VMware+Server+2.0
The instructions haven't been tested and there are probably a couple
errors but this will hopefully point you in the right direction.
To use static public addresses, you just need to define them when
you add new computers and configure the management node to use
static addresses and specify the correct subnet mask, gateway, and
DNS servers under Management Nodes > Edit.
-Andy