Evelio Could you please check that you have these files/folders as well?
/install/image/x86/installer_files/listener.py /install/image/x86/installer_files/rootimg.gz Also, can you check that there are symlinks for x86 or x86_64 in /install/image/ and /tftpboot/xcat/image/, ie: $ ls -l x86 x86_64 -> x86 Thanks. On Mar 15, 2012, at 9:56 , Evelio Quiros wrote: > Thanks Dmitri, > > In following this article, I get to the bottom of the page, where I put in > the 3 files needed for a stateless image. > > I place the 3 files in the located indicated, and when I run > > nodeset d6100a image > > I get this: > > Error: vmlinuz and initrd.img not found at /tftpboot/xcat/image/x86_64 > Error: Some nodes failed to set up image resources, aborting > > But vmlinuz and initrd.img are at /tftpboot/xcat/image/x86_64 > > > Is there something else that needs to happen first ? > > > Also, the last step talks about NFS servers for the image store. > Are these required ? > > Thanks for all your help, > Al Quiros > > > > On 3/14/12 4:05 PM, "Dmitri Chebotarov" <4dim...@gmail.com> wrote: > >> Evelio >> >> Please follow this article to add support for 'image' and 'install' : >> >> https://cwiki.apache.org/VCL/adding-support-for-partimage-and-partimage-ng >> -to-xcat-2x-unofficial.html >> >> Thanks. >> >> -- >> Dmitri Chebotarov >> >> >> On Wednesday, March 14, 2012 at 15:37 , Evelio Quiros wrote: >> >>> Hello again, >>> >>> Dimitri, thanks for the advice. >>> >>> I have a question about these commands. >>> Below, you wrote "nodeset d6100a image", >>> >>> But there is no image argument for nodeset. >>> Here is the man page: >>> >>> nodeset [-h|--help|-v|--version] >>> nodeset <noderange> >>> >>> [install|shell|boot|runcmd=bmcsetup|netboot|iscsiboot|osimage=<imagename> >>> |s >>> tatelite] >>> >>> When I try the command as-is, I get this: >>> >>> >>> nodeset d6100a image >>> d6100a: Error: Unable to identify plugin for this command, check >>> relevant >>> tables: nodetype.os >>> Error: Some nodes failed to set up image resources, aborting >>> >>> I have done tabdump on the various tables, and done tabedit to modify >>> them >>> to my environment. >>> >>> >>> I know this is not an xCAT list, but your guidance would be appreciated. >>> >>> Thanks, >>> Al Quiros >>> >>> >>> >>> On 3/13/12 4:45 PM, "Dmitri Chebotarov" <dcheb...@gmu.edu >>> (mailto:dcheb...@gmu.edu)> wrote: >>> >>>> Evelio, >>>> >>>> You should be able to capture image via xCAT before you can use >>> VCL/xCAT. >>>> >>>> To capture image via xCAT: >>>> >>>> nodech d6100a nodetype.os=image nodetype.profile=rh5image-rh66-v0 >>>> nodeset d6100a image - this will create PXEboot config file for >>> d6100a: >>>> >>>> cat /tftpboot/pxelinux.cfg/<d6100a-PXE-if-mac> >>>> >>>> #image rh5image-rh66-v0 >>>> DEFAULT xCAT >>>> LABEL xCAT >>>> KERNEL xcat/image/x86_64/vmlinuz >>>> APPEND initrd=xcat/image/x86_64/initrd.img >>>> >>> imgurl=http://xcat-master/install/image/x86_64/installer_files/rootimg.gz >>>> image=/install/image/x86_64/rh5image-rh66-v0.img blocks=512 >>>> action=save installnic=eth0 reboot noipv6 >>>> IPAPPEND 2 >>>> >>>> 'tabdump nodetype' should look similar to this - note that arch is >>> x86: >>>> >>>> >>> #node,os,arch,profile,provmethod,supportedarchs,nodetype,comments,disable >>>> ... >>>> "d6100a","image","x86","rh5image-rh66-v0","image","x86,x86_64",,, >>>> ... >>>> >>>> Then do 'rpower d6100a reset'. This will restart d6100a and when node >>>> boots over PXE it will boot into >>>> http://xcat-master/install/image/x86_64/installer_files/rootimg.gz >>> and, >>>> given that image works fine and maps NFS store OK, it dump hd image to >>>> /install/image/x86_64/rh5image-rh66-v0.img . >>>> >>>> If it's successful then to install from the image: >>>> >>>> nodeset d6100a install >>>> >>>> 'tabdump nodetype' should look similar to this - provmethod changes >>> from >>>> image to install: >>>> >>>> >>> #node,os,arch,profile,provmethod,supportedarchs,nodetype,comments,disable >>>> ... >>>> "d6100a","image","x86","rh5image-rh66-v0","install","x86,x86_64",,, >>>> ... >>>> >>>> If these steps work OK, then you can use VCL to capture bare-metal >>> image. >>>> VCL uses 'nodeset <node> image' and 'nodeset <node> install' >>> commands, so >>>> it's good idea to make them work before using VCL. >>>> >>>> Thanks. >>>> On Mar 13, 2012, at 16:11 , Evelio Quiros wrote: >>>> >>>>> Hello Again, >>>>> >>>>> After trying again to capture a running image on a bare metal node, >>> I >>>>> get >>>>> a failure message: >>>>> Any ideas ? >>>>> >>>>> Al Q >>>>> >>>>> >>>>> Added new image to database: 'rh6' >>>>> image.name (http://image.name): rh5image-rh66-v0 >>>>> image.id: 6 >>>>> imagerevision.id: 6 >>>>> imagemeta.id: 3 >>>>> resource.id: 16 >>>>> >>>>> >>>>> >>> ------------------------------------------------------------------------- >>>>> -- >>>>> - >>>>> Inserted imaging request to the database: >>>>> request ID: 1 >>>>> reservation ID: 1 >>>>> >>>>> This process will now display the contents of the vcld.log file if >>> the >>>>> vcld >>>>> daemon is running. If you do not see many lines of additional >>> output, >>>>> exit >>>>> this >>>>> process, start the vcld daemon, and monitor the image capture >>> process by >>>>> running >>>>> the command: >>>>> tail -f /var/log/vcld.log | grep '1:1' >>>>> >>>>> >>>>> >>> ------------------------------------------------------------------------- >>>>> -- >>>>> - >>>>> 2012-03-13 16:03:34|2012|vcld:main(167)|lastcheckin time updated for >>>>> management node 1: 2012-03-13 16:03:34 >>>>> 2012-03-13 >>> 16:03:39|6899|utils.pm:setup_get_array_choice(9947)|choices >>>>> argument: >>>>> 2012-03-13 16:03:39|2012|vcld:main(167)|lastcheckin time updated for >>>>> management node 1: 2012-03-13 16:03:39 >>>>> 2012-03-13 16:03:44|2012|vcld:main(167)|lastcheckin time updated for >>>>> management node 1: 2012-03-13 16:03:44 >>>>> 2012-03-13 16:03:48|6899|utils.pm:insert_request(8358)|inserted new >>>>> reload >>>>> request into request table, request id=1 >>>>> 2012-03-13 16:03:48|6899|utils.pm:insert_request(8389)|inserted new >>>>> reload >>>>> request into reservation table, reservation id=1 >>>>> 2012-03-13 16:03:50|2012|vcld:main(167)|lastcheckin time updated for >>>>> management node 1: 2012-03-13 16:03:49 >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|2012|1:1|image|utils.pm:reservation_being_processed(8938)|comput >>>>> er >>>>> loadlog 'begin' entry does NOT exist for reservation 1 >>>>> 2012-03-13 >>> 16:03:50|2012|1:1|image|utils.pm:run_command(9010)|executed >>>>> command: pgrep -fl 'vcld [0-9]+:1 ', pid: 7004, exit status: 0, >>> output: >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|2012|1:1|image|utils.pm:is_management_node_process_running(9192) >>>>> |p >>>>> rocess is NOT running, identifier: 'vcld [0-9]+:1 ' >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|2012|1:1|image|utils.pm:reservation_being_processed(8959)|reserv >>>>> at >>>>> ion is NOT currently being processed >>>>> 2012-03-13 16:03:50|2012|1:1|image|vcld:main(278)|reservation 1 is >>> NOT >>>>> already being processed >>>>> 2012-03-13 >>>>> 16:03:50|2012|1:1|image|utils.pm:get_request_info(4520)|standalone >>>>> affiliation found: Local >>>>> 2012-03-13 16:03:50|2012|1:1|image|vcld:main(283)|retrieved request >>>>> information from database >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|2012|1:1|image|DataStructure.pm:is_parent_reservation(991)|retur >>>>> ni >>>>> ng true: parent reservation ID for this request: 1 >>>>> 2012-03-13 >>>>> 16:03:50|2012|1:1|image|utils.pm:update_request_state(1991)|request >>> 1 >>>>> state updated to: pending, laststate to: image >>>>> 2012-03-13 >>> 16:03:50|2012|1:1|image|utils.pm:insertloadlog(3875)|inserted >>>>> computer=1, begin, beginning to process, state is image >>>>> 2012-03-13 16:03:50|2012|1:1|image|vcld:make_new_child(515)|loaded >>>>> VCL::image module >>>>> 2012-03-13 16:03:50|2012|1:1|image|vcld:make_new_child(539)|current >>>>> number >>>>> of forked kids: 1 >>>>> 2012-03-13 16:03:50|7018|1:1|image|vcld:make_new_child(555)|vcld >>>>> environment variable set to 0 for this process >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'test' >>> key for >>>>> VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>> 'forimaging' >>>>> key >>>>> for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>> 'reservation' >>>>> key for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'userid' >>> key >>>>> for >>>>> VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>>>> 'daterequested' >>>>> key for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>>>> 'RESERVATIONID' >>>>> key for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'UPDATED' >>> key >>>>> for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>> 'SUBIMAGE' key >>>>> for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>> 'CHECKTIME' >>>>> key >>>>> for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'state' >>> key >>>>> for >>>>> VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>> 'laststate' >>>>> key >>>>> for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>> 'PRELOADONLY' >>>>> key for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>> 'laststateid' >>>>> key for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'user' >>> key for >>>>> VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'id' key >>> for >>>>> VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'PID' key >>> for >>>>> VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>> 'DURATION' key >>>>> for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'PPID' >>> key for >>>>> VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>> 'datemodified' >>>>> key for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>>>> 'RESERVATIONCOUNT' key for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'end' key >>> for >>>>> VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'stateid' >>> key >>>>> for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>> 'PARENTIMAGE' >>>>> key for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>> 'checkuser' >>>>> key >>>>> for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'preload' >>> key >>>>> for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>>>> 'NOTICEINTERVAL' >>>>> key for VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'start' >>> key >>>>> for >>>>> VCL::image object from arguments >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'logid' >>> key >>>>> for >>>>> VCL::image object from arguments >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(361)|VCL::Module::O >>>>> S: >>>>> :Linux::ManagementNode module loaded >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux::Manage >>>>> me >>>>> ntNode object created for image <not set>, address: 3fdf4b8 >>>>> 2012-03-13 >>>>> 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data >>>>> structure updated: >>>>> $self->request_data->{reservation}{0}{computer}{hostname} >>>>> |7018|1:1|image| computer_hostname = vcldev01.p.fiu.edu >>>>> 2012-03-13 >>>>> 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data >>>>> structure updated: >>>>> $self->request_data->{reservation}{0}{computer}{NODENAME} >>>>> |7018|1:1|image| computer_node_name = vcldev01 >>>>> 2012-03-13 >>>>> 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data >>>>> structure updated: >>>>> $self->request_data->{reservation}{0}{computer}{SHORTNAME} >>>>> |7018|1:1|image| computer_short_name = vcldev01 >>>>> 2012-03-13 >>>>> 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data >>>>> structure updated: >>>>> $self->request_data->{reservation}{0}{computer}{IPaddress} >>>>> |7018|1:1|image| computer_ip_address = 10.106.128.12 >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(366)|VCL::Module::O >>>>> S: >>>>> :Linux::ManagementNode OS object created, address: 3fdf4b8 >>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(192)|VCL::image >>> object >>>>> created for state image, address: 3e02078 >>>>> 2012-03-13 16:03:50|7018|1:1|image|State.pm:initialize(86)|obtained >>> a >>>>> database handle for this state process, stored as $ENV{dbh} >>>>> 2012-03-13 16:03:50|7018|1:1|image|State.pm:check_image_os(762)|no >>>>> corrections need to be made to image OS: rh5image >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|DataStructure.pm:is_parent_reservation(991)|retur >>>>> ni >>>>> ng true: parent reservation ID for this request: 1 >>>>> 2012-03-13 >>>>> >>> 16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7098)|reservation >>>>> count: 1 >>>>> 2012-03-13 >>>>> >>> 16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7117)|PARENTIMAGE: >>>>> 1 >>>>> 2012-03-13 >>>>> >>> 16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7118)|SUBIMAGE: 0 >>>>> 2012-03-13 >>>>> 16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7136)|renamed >>>>> process >>>>> to 'vcld 1:1 image d6100a rh5image-rh66-v0 admin' >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|DataStructure.pm:is_parent_reservation(991)|retur >>>>> ni >>>>> ng true: parent reservation ID for this request: 1 >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|DataStructure.pm:is_parent_reservation(991)|retur >>>>> ni >>>>> ng true: parent reservation ID for this request: 1 >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|Module.pm:create_os_object(298)|VCL::Module::OS:: >>>>> Li >>>>> nux module loaded >>>>> 2012-03-13 >>>>> >>> 16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(335)|management >>>>> node >>>>> OS object has already been created, address: 3fdf4b8, returning 1 >>>>> 2012-03-13 >>>>> 16:03:50|7018|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux >>> object >>>>> created for image rh5image-rh66-v0, address: 3fe23d8 >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|Module.pm:create_os_object(304)|VCL::Module::OS:: >>>>> Li >>>>> nux OS object created for rh5image-rh66-v0, address: 3fe23d8 >>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:initialize(110)|XCATROOT >>>>> environment variable is not set, using /opt/xcat >>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:initialize(128)|xCAT root >>>>> path >>>>> found: /opt/xcat >>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:initialize(130)|xCAT >>> module >>>>> initialized >>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(110)|XCATROOT >>>>> environment variable is not set, using /opt/xcat >>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(128)|xCAT >>> root >>>>> path >>>>> found: /opt/xcat >>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(130)|xCAT >>> module >>>>> initialized >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|Module.pm:create_provisioning_object(420)|VCL::Mo >>>>> du >>>>> le::Provisioning::xCAT2 module loaded >>>>> 2012-03-13 >>>>> >>> 16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(335)|management >>>>> node >>>>> OS object has already been created, address: 3fdf4b8, returning 1 >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|Module.pm:new(200)|VCL::Module::Provisioning::xCA >>>>> T2 >>>>> object created for computer d6100a, address: 3fe2570 >>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(110)|XCATROOT >>>>> environment variable is not set, using /opt/xcat >>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(128)|xCAT >>> root >>>>> path >>>>> found: /opt/xcat >>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(130)|xCAT >>> module >>>>> initialized >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|Module.pm:create_provisioning_object(426)|VCL::Mo >>>>> du >>>>> le::Provisioning::xCAT2 provisioner object created for d6100a, >>> address: >>>>> 3fe2570 >>>>> 2012-03-13 >>> 16:03:50|7018|1:1|image|State.pm:initialize(126)|returning 1 >>>>> 2012-03-13 >>> 16:03:50|7018|1:1|image|vcld:make_new_child(565)|VCL::image >>>>> object created and initialized >>>>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:mail(1255)|SUCCESS -- >>>>> Sending >>>>> mail To: evq...@fiu.edu (mailto:evq...@fiu.edu), VCL IMAGE Creation >>> Started: rh5image-rh66-v0 >>>>> 2012-03-13 >>> 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2434)|image >>>>> OS >>>>> install type: partimage >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(2910)|manageme >>>>> nt >>>>> node identifier argument was not specified >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(2932)|attempti >>>>> ng >>>>> to determine repository path for image on vcldev01.p.fiu.edu: >>>>> |7018|1:1|image| image id: 6 >>>>> |7018|1:1|image| OS name: rh5image >>>>> |7018|1:1|image| OS type: linux >>>>> |7018|1:1|image| OS install type: partimage >>>>> |7018|1:1|image| OS source path: image >>>>> |7018|1:1|image| architecture: x86_64 >>>>> 2012-03-13 >>>>> >>> 16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(2996)|did not >>>>> find any images under /images/linux_image/x86_64 on >>> vcldev01.p.fiu.edu >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(3006)|returnin >>>>> g >>>>> repository path for vcldev01.p.fiu.edu: /images/image/x86_64 >>>>> 2012-03-13 >>> 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2444)|image >>>>> repository path: /images/image/x86_64 >>>>> 2012-03-13 >>> 16:03:50|7018|1:1|image|utils.pm:run_command(9010)|executed >>>>> command: du -c /images/image/x86_64/*rh5image-rh66-v0* 2>&1 | grep >>> total >>>>> 2>&1, pid: 7030, exit status: 1, output: >>>>> |7018|1:1|image| 0 total >>>>> 2012-03-13 >>> 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2506)|image >>>>> does NOT exist: rh5image-rh66-v0 >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|xCAT2.pm:_get_image_template_path(2084)|managemen >>>>> t >>>>> node identifier argument was not specified >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|xCAT2.pm:_get_image_template_path(2115)|attemptin >>>>> g >>>>> to determine template path for image: >>>>> |7018|1:1|image| image name: rh5image-rh66-v0 >>>>> |7018|1:1|image| OS install type: partimage >>>>> |7018|1:1|image| OS source path: image >>>>> |7018|1:1|image| xCAT 2.x OS source path: image >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|xCAT2.pm:_get_image_template_path(2123)|returning >>>>> : >>>>> /opt/xcat/share/xcat/install/image >>>>> 2012-03-13 >>>>> 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2518)|template >>>>> repository path for rh5image-rh66-v0: >>> /opt/xcat/share/xcat/install/image >>>>> 2012-03-13 >>>>> 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2530)|template >>>>> file does not exist: >>>>> /opt/xcat/share/xcat/install/image/rh5image-rh66-v0.tmpl >>>>> 2012-03-13 >>> 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2570)|image >>>>> rh5image-rh66-v0 does NOT exist on this management node >>>>> 2012-03-13 16:03:50|7018|1:1|image|image.pm:process(145)|image >>>>> rh5image-rh66-v0 does not exist in the repository >>>>> 2012-03-13 >>>>> 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data >>>>> structure updated: >>>>> $self->request_data->{reservation}{1}{image}{lastupdate} >>>>> |7018|1:1|image| image_lastupdate = 2012-03-13 16:03:50 >>>>> 2012-03-13 >>>>> 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data >>>>> structure updated: >>>>> $self->request_data->{reservation}{1}{imagerevision}{datecreated} >>>>> |7018|1:1|image| imagerevision_date_created = 2012-03-13 16:03:50 >>>>> 2012-03-13 16:03:50|7018|1:1|image|image.pm:process(161)|calling >>>>> provisioning module's capture() subroutine >>>>> 2012-03-13 >>>>> >>> 16:03:50|7018|1:1|image|xCAT2.pm:capture(776)|image=rh5image-rh66-v0, >>>>> computer=d6100a >>>>> 2012-03-13 >>>>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5380)|executing SSH >>>>> command on d6100a: >>>>> |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o >>>>> StrictHostKeyChecking=no -l root -p 22 -x d6100a 'chown root >>>>> currentimage.txt; chmod 777 currentimage.txt' 2>&1 >>>>> 2012-03-13 >>>>> >>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5464)|run_ssh_command >>>>> output: >>>>> |7018|1:1|image| Warning: Permanently added 'd6100a,10.0.0.25' >>> (RSA) to >>>>> the list of known hosts. >>>>> |7018|1:1|image| Permission denied, please try again. >>>>> |7018|1:1|image| Permission denied, please try again. >>>>> |7018|1:1|image| Permission denied >>>>> (publickey,gssapi-keyex,gssapi-with-mic,password). >>>>> 2012-03-13 >>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5474)|SSH >>>>> command executed on d6100a, command: >>>>> |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o >>>>> StrictHostKeyChecking=no -l root -p 22 -x d6100a 'chown root >>>>> currentimage.txt; chmod 777 currentimage.txt' 2>&1 >>>>> |7018|1:1|image| returning (255, "Warning: Permanently added >>> 'd6...") >>>>> 2012-03-13 >>>>> >>> 16:03:50|7018|1:1|image|utils.pm:write_currentimage_txt(5685)|updated >>>>> ownership and permissions on currentimage.txt >>>>> 2012-03-13 >>>>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5380)|executing SSH >>>>> command on d6100a: >>>>> |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o >>>>> StrictHostKeyChecking=no -l root -p 22 -x d6100a 'echo -e >>>>> >>>>> >>> "rh5image-rh66-v0\r\nid=6\r\nprettyname=rh6\r\nimagerevision_id=6\r\nimag >>>>> er >>>>> evision_datecreated=2012-03-13 >>>>> 16:03:50\r\ncomputer_id=1\r\ncomputer_hostname=d6100a" > >>>>> currentimage.txt >>>>> && cat currentimage.txt' 2>&1 >>>>> 2012-03-13 >>>>> >>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5464)|run_ssh_command >>>>> output: >>>>> |7018|1:1|image| Warning: Permanently added 'd6100a,10.0.0.25' >>> (RSA) to >>>>> the list of known hosts. >>>>> |7018|1:1|image| Permission denied, please try again. >>>>> |7018|1:1|image| Permission denied, please try again. >>>>> |7018|1:1|image| Permission denied >>>>> (publickey,gssapi-keyex,gssapi-with-mic,password). >>>>> 2012-03-13 >>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5474)|SSH >>>>> command executed on d6100a, command: >>>>> |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o >>>>> StrictHostKeyChecking=no -l root -p 22 -x d6100a 'echo -e >>>>> >>>>> >>> "rh5image-rh66-v0\r\nid=6\r\nprettyname=rh6\r\nimagerevision_id=6\r\nimag >>>>> er >>>>> evision_datecreated=2012-03-13 >>>>> 16:03:50\r\ncomputer_id=1\r\ncomputer_hostname=d6100a" > >>>>> currentimage.txt >>>>> && cat currentimage.txt' 2>&1 >>>>> |7018|1:1|image| returning (255, "Warning: Permanently added >>> 'd6...") >>>>> |7018|1:1|image| ---- WARNING ---- >>>>> |7018|1:1|image| 2012-03-13 >>>>> >>> 16:03:50|7018|1:1|image|utils.pm:write_currentimage_txt(5699)|failed to >>>>> create currentimage.txt file on d6100a: >>>>> |7018|1:1|image| Warning: Permanently added 'd6100a,10.0.0.25' >>> (RSA) to >>>>> the list of known hosts. >>>>> |7018|1:1|image| Permission denied, please try again. >>>>> |7018|1:1|image| Permission denied, please try again. >>>>> |7018|1:1|image| Permission denied >>>>> (publickey,gssapi-keyex,gssapi-with-mic,password). >>>>> |7018|1:1|image| ( 0) utils.pm, write_currentimage_txt (line: 5699) >>>>> |7018|1:1|image| (-1) xCAT2.pm, capture (line: 779) >>>>> |7018|1:1|image| (-2) image.pm, process (line: 162) >>>>> |7018|1:1|image| (-3) vcld, make_new_child (line: 568) >>>>> |7018|1:1|image| (-4) vcld, main (line: 346) >>>>> |7018|1:1|image| ---- WARNING ---- >>>>> |7018|1:1|image| 2012-03-13 >>>>> 16:03:50|7018|1:1|image|xCAT2.pm:capture(783)|unable to update >>>>> currentimage.txt on d6100a >>>>> |7018|1:1|image| ( 0) xCAT2.pm, capture (line: 783) >>>>> |7018|1:1|image| (-1) image.pm, process (line: 162) >>>>> |7018|1:1|image| (-2) vcld, make_new_child (line: 568) >>>>> |7018|1:1|image| (-3) vcld, main (line: 346) >>>>> |7018|1:1|image| ---- WARNING ---- >>>>> |7018|1:1|image| 2012-03-13 >>>>> 16:03:50|7018|1:1|image|image.pm:process(166)|rh5image-rh66-v0 image >>>>> failed to be captured by provisioning module >>>>> |7018|1:1|image| ( 0) image.pm, process (line: 166) >>>>> |7018|1:1|image| (-1) vcld, make_new_child (line: 568) >>>>> |7018|1:1|image| (-2) vcld, main (line: 346) >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|DataStructure.pm:get_computer_private_ip_address( >>>>> 15 >>>>> 81)|attempting to retrieve private IP address for computer: d6100a >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|DataStructure.pm:get_computer_private_ip_address( >>>>> 15 >>>>> 85)|retrieved contents of /etc/hosts on this management node, >>> contains 9 >>>>> lines >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|DataStructure.pm:get_computer_private_ip_address( >>>>> 16 >>>>> 45)|returning IP address from /etc/hosts file: 10.0.0.25 >>>>> 2012-03-13 >>> 16:03:50|7018|1:1|image|utils.pm:is_inblockrequest(6163)|zero >>>>> rows were returned from database select >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|DataStructure.pm:get_image_affiliation_name(2035) >>>>> |i >>>>> mage owner id: 1 >>>>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2709)|database >>>>> requested (information_schema) does not match handle stored in >>> $ENV{dbh} >>>>> (vcl:localhost) >>>>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2760)|database >>>>> handle stored in $ENV{dbh} >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|DataStructure.pm:retrieve_user_data(1352)|attempt >>>>> in >>>>> g to retrieve and store data for user: user.id = '1' >>>>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2709)|database >>>>> requested (vcl) does not match handle stored in $ENV{dbh} >>>>> (information_schema:localhost) >>>>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2760)|database >>>>> handle stored in $ENV{dbh} >>>>> 2012-03-13 >>>>> >>> 16:03:50|7018|1:1|image|DataStructure.pm:retrieve_user_data(1415)|data >>>>> has >>>>> been retrieved for user: admin (id: 1) >>>>> 2012-03-13 16:03:51|7018|1:1|image|utils.pm:mail(1255)|SUCCESS -- >>>>> Sending >>>>> mail To: evq...@fiu.edu (mailto:evq...@fiu.edu), PROBLEM -- >>>>> 1:1|image|image.pm|d6100a|rh5image-rh66-v0|admin >>>>> |7018|1:1|image| ---- CRITICAL ---- >>>>> |7018|1:1|image| 2012-03-13 >>>>> >>>>> >>> 16:03:50|7018|1:1|image|image.pm:reservation_failed(385)|rh5image-rh66-v0 >>>>> image creation failed >>>>> |7018|1:1|image| ( 0) image.pm, reservation_failed (line: 385) >>>>> |7018|1:1|image| (-1) image.pm, process (line: 167) >>>>> |7018|1:1|image| (-2) vcld, make_new_child (line: 568) >>>>> |7018|1:1|image| (-3) vcld, main (line: 346) >>>>> 2012-03-13 16:03:51|7018|1:1|image|utils.pm:mail(1255)|SUCCESS -- >>>>> Sending >>>>> mail To: root@localhost, VCL -- NOTICE DELAY Image Creation rh6 >>>>> 2012-03-13 16:03:51|7018|1:1|image|utils.pm:mail(1255)|SUCCESS -- >>>>> Sending >>>>> mail To: evq...@fiu.edu (mailto:evq...@fiu.edu), VCL -- NOTICE >>> FAILED Image Creation rh6 >>>>> 2012-03-13 >>>>> 16:03:51|7018|1:1|image|utils.pm:update_request_state(1991)|request >>> 1 >>>>> state updated to: maintenance, laststate to: image >>>>> 2012-03-13 >>>>> 16:03:51|7018|1:1|image|image.pm:reservation_failed(437)|request >>> state >>>>> set >>>>> to maintenance, laststate to image >>>>> 2012-03-13 >>>>> >>> 16:03:51|7018|1:1|image|utils.pm:update_computer_state(2033)|computer 1 >>>>> state updated to: maintenance >>>>> 2012-03-13 >>>>> 16:03:51|7018|1:1|image|image.pm:reservation_failed(445)|d6100a >>>>> state set to maintenance >>>>> 2012-03-13 >>>>> 16:03:51|7018|1:1|image|image.pm:reservation_failed(452)|exiting >>>>> 2012-03-13 16:03:51|7018|1:1|image|State.pm:DESTROY(829)|VCL::image >>>>> destructor called, address: 3e02078 >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:51|7018|1:1|image|utils.pm:delete_computerloadlog_reservation(6742) >>>>> |r >>>>> emoving computerloadlog entries matching loadstate = begin >>>>> 2012-03-13 >>>>> >>>>> >>> 16:03:51|7018|1:1|image|utils.pm:delete_computerloadlog_reservation(6789) >>>>> |d >>>>> eleted rows from computerloadlog for reservation id=1 >>>>> 2012-03-13 16:03:51|7018|1:1|image|State.pm:DESTROY(848)|number of >>>>> database handles state process created: 3 >>>>> 2012-03-13 16:03:51|7018|1:1|image|State.pm:DESTROY(876)|VCL::image >>>>> process duration: 1 seconds >>>>> 2012-03-13 16:03:51|2012|vcld:REAPER(718)|VCL process exited for >>>>> reservation 1, PID: 7018, signal: CHLD >>>>> 2012-03-13 16:03:51|2012|vcld:main(167)|lastcheckin time updated for >>>>> management node 1: 2012-03-13 16:03:51 >>>>> 2012-03-13 16:03:56|2012|vcld:main(167)|lastcheckin time updated for >>>>> management node 1: 2012-03-13 16:03:56 >>>>> >>>>> >>>>> >>>>> >>>>> On 3/13/12 3:28 PM, "Evelio Quiros" <evq...@fiu.edu >>> (mailto:evq...@fiu.edu)> wrote: >>>>> >>>>>> Hello All, >>>>>> >>>>>> Ok, I assume that I must get xCAT working before VCL is involved. >>>>>> So, following the instructions from the link below (thanks Andy), >>> I >>>>>> setup >>>>>> xCAT >>>>>> on the management node and entered the information for my nodes >>> (dell >>>>>> 6100). >>>>>> When I issued a command to remote install (rinstall), I get this >>> error: >>>>>> >>>>>> Error: Install image not found in /install/rh6.0/x86_64 >>>>>> Error: Some nodes failed to set up install resources, aborting >>>>>> nodeset failure at /opt/xcat/bin/rinstall line 53. >>>>>> >>>>>> >>>>>> >>>>>> So I did import the iso with the copycds command, and that seemed >>> to be >>>>>> ok. >>>>>> I added the nodes to the various tables (nodelist, nodehm, mac). >>>>>> >>>>>> I setup dns and dhcp for the internal network. >>>>>> >>>>>> ** Second Question >> did I need to setup dhcp again if dhcp was >>>>>> already >>>>>> running on this VCL management node ? >>>>>> >>>>>> Do I need to run rinstall, or should I just try to capture an >>> installed >>>>>> image ? >>>>>> >>>>>> I guess I need some really basic information, thanks for your >>> patience. >>>>>> >>>>>> Regards, >>>>>> Al Quiros >>>>>> Florida International University >>>>>> >>>>>> >>>>>> >>>>>> On 3/7/12 3:35 PM, "Andy Kurth" <andy_ku...@ncsu.edu >>> (mailto:andy_ku...@ncsu.edu)> wrote: >>>>>> >>>>>>> xCAT should be installed on the management node. It doesn't >>> need to >>>>>>> be installed on other machines. There are a few different xCAT >>>>>>> installation instruction pages on their site. You may want to >>> start >>>>>>> with this simpler one: >>>>>>> >>>>>>> >>> http://sourceforge.net/apps/mediawiki/xcat/index.php?title=Basic_Instal >>>>>>> l_ >>>>>>> D >>>>>>> HCP >>>>>>> >>>>>>> -Andy >>>>>>> >>>>>>> On Wed, Mar 7, 2012 at 3:16 PM, Evelio Quiros <evq...@fiu.edu >>> (mailto:evq...@fiu.edu)> wrote: >>>>>>>> Hello, >>>>>>>> >>>>>>>> After working a while with VmWare images, we have started >>>>>>>> experimenting >>>>>>>> with >>>>>>>> Xcat bare metal images. To accommodate the added level of >>> complexity >>>>>>>> with >>>>>>>> Xcat, I created a separate development environment with VCL >>> and some >>>>>>>> dell >>>>>>>> 6100 high density nodes. I have installed RHEL 6.1 with Xcat >>> on all >>>>>>>> the >>>>>>>> nodes. Following the instructions on the doc page, I installed >>>>>>>> partimage to >>>>>>>> the xcat installation. I think its correct, except that these >>> are not >>>>>>>> IBM >>>>>>>> blades, so I am unsure how to build a stateless image on this >>>>>>>> hardware. >>>>>>>> Just >>>>>>>> attempting to capture the image "as-is" failed, and the error >>>>>>>> messages >>>>>>>> are >>>>>>>> below. Is there any more documentation on this process, and >>> how to >>>>>>>> make >>>>>>>> Xcat >>>>>>>> work with VCL? Being new to Xcat, I guess that I am missing >>> some >>>>>>>> background >>>>>>>> material on what is supposed to happen here. For example, the >>> error >>>>>>>> log >>>>>>>> states that /opt/xcat does not exist, but it does exist on >>> the node I >>>>>>>> was >>>>>>>> attempting to capture. Does Xcat need to be on the management >>> node >>>>>>>> too >>>>>>>> ? >>>>>>>> >>>>>>>> The information I am using is located at: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>> http://sourceforge.net/apps/mediawiki/xcat/index.php?title=Setting_Up_ >>>>>>>> a_ >>>>>>>> L >>>>>>>> inux_xCAT_Mgmt_Node >>>>>>>> >>>>>>>> And >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>> https://cwiki.apache.org/VCL/adding-support-for-partimage-and-partimag >>>>>>>> e- >>>>>>>> n >>>>>>>> g-to-xcat-2x-unofficial.html >>>>>>>> >>>>>>>> Any other information available ? >>>>>>>> >>>>>>>> Thanks, >>>>>>>> Al Quiros >>>>>>>> Florida International University >>>>>>>> >>>>>>>> ********************************************** >>>>>>>> >>>>>>>> Error message from my attempt at capturing the image below: >>>>>>>> >>>>>>>> VCL::image object could not be created and initialized >>>>>>>> >>>>>>>> >>>>>>>> >>> ---------------------------------------------------------------------- >>>>>>>> -- >>>>>>>> time: 2012-03-07 14:49:31 >>>>>>>> caller: vcld:make_new_child(571) >>>>>>>> ( 0) vcld, make_new_child (line: 571) >>>>>>>> (-1) vcld, main (line: 346) >>>>>>>> >>>>>>>> >>>>>>>> >>> ---------------------------------------------------------------------- >>>>>>>> -- >>>>>>>> management node: vcldev01.p.fiu.edu >>>>>>>> reservation PID: 12372 >>>>>>>> parent vcld PID: 2044 >>>>>>>> >>>>>>>> request ID: 1 >>>>>>>> reservation ID: 1 >>>>>>>> request state/laststate: image/image >>>>>>>> request start time: 2012-03-07 14:49:30 >>>>>>>> request end time: 2012-03-07 15:49:30 >>>>>>>> for imaging: no >>>>>>>> log ID: none >>>>>>>> >>>>>>>> computer: 6100a >>>>>>>> computer id: 1 >>>>>>>> computer type: blade >>>>>>>> computer eth0 MAC address: <undefined> >>>>>>>> computer eth1 MAC address: <undefined> >>>>>>>> computer private IP address: 10.0.0.25 >>>>>>>> computer public IP address: 10.106.128.14 >>>>>>>> computer in block allocation: no >>>>>>>> provisioning module: VCL::Module::Provisioning::xCAT2 >>>>>>>> >>>>>>>> image: rh5image-rh6xcat5-v0 >>>>>>>> image display name: rh6xcat >>>>>>>> image ID: 5 >>>>>>>> image revision ID: 5 >>>>>>>> image size: 1450 MB >>>>>>>> use Sysprep: yes >>>>>>>> root access: yes >>>>>>>> image owner ID: 1 >>>>>>>> image owner affiliation: Local >>>>>>>> image revision date created: 2012-03-07 14:49:29 >>>>>>>> image revision production: yes >>>>>>>> OS module: VCL::Module::OS::Linux >>>>>>>> >>>>>>>> user: admin >>>>>>>> user name: vcl admin >>>>>>>> user ID: 1 >>>>>>>> user affiliation: Local >>>>>>>> >>>>>>>> >>>>>>>> >>> ---------------------------------------------------------------------- >>>>>>>> -- >>>>>>>> RECENT LOG ENTRIES FOR THIS PROCESS: >>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>> 'id' key >>>>>>>> for >>>>>>>> VCL::image object from arguments >>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>> 'PID' key >>>>>>>> for >>>>>>>> VCL::image object from arguments >>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>> 'DURATION' >>>>>>>> key >>>>>>>> for VCL::image object from arguments >>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>> 'PPID' key >>>>>>>> for >>>>>>>> VCL::image object from arguments >>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>>>>>>> 'datemodified' >>>>>>>> key for VCL::image object from arguments >>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>>>>>>> 'RESERVATIONCOUNT' key for VCL::image object from arguments >>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>> 'end' key >>>>>>>> for >>>>>>>> VCL::image object from arguments >>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>> 'stateid' >>>>>>>> key for >>>>>>>> VCL::image object from arguments >>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>>>>>>> 'PARENTIMAGE' key >>>>>>>> for VCL::image object from arguments >>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>>>>>>> 'checkuser' >>>>>>>> key >>>>>>>> for VCL::image object from arguments >>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>> 'preload' >>>>>>>> key for >>>>>>>> VCL::image object from arguments >>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>>>>>>> 'NOTICEINTERVAL' >>>>>>>> key for VCL::image object from arguments >>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>> 'start' >>>>>>>> key >>>>>>>> for >>>>>>>> VCL::image object from arguments >>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>> 'logid' >>>>>>>> key >>>>>>>> for >>>>>>>> VCL::image object from arguments >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(361)|VCL::Modul >>>>>>>> e: >>>>>>>> : >>>>>>>> OS::Linux::ManagementNode >>>>>>>> module loaded >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux::Ma >>>>>>>> na >>>>>>>> g >>>>>>>> ementNode >>>>>>>> object created for image <not set>, address: 2417400 >>>>>>>> 2012-03-07 >>>>>>>> >>> 14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data >>>>>>>> structure updated: >>>>>>>> $self->request_data->{reservation}{0}{computer}{hostname} >>>>>>>> |12372|1:1|image| computer_hostname = vcldev01.p.fiu.edu >>>>>>>> 2012-03-07 >>>>>>>> >>> 14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data >>>>>>>> structure updated: >>>>>>>> $self->request_data->{reservation}{0}{computer}{NODENAME} >>>>>>>> |12372|1:1|image| computer_node_name = vcldev01 >>>>>>>> 2012-03-07 >>>>>>>> >>> 14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data >>>>>>>> structure updated: >>>>>>>> $self->request_data->{reservation}{0}{computer}{SHORTNAME} >>>>>>>> |12372|1:1|image| computer_short_name = vcldev01 >>>>>>>> 2012-03-07 >>>>>>>> >>> 14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data >>>>>>>> structure updated: >>>>>>>> $self->request_data->{reservation}{0}{computer}{IPaddress} >>>>>>>> |12372|1:1|image| computer_ip_address = 10.106.128.12 >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(366)|VCL::Modul >>>>>>>> e: >>>>>>>> : >>>>>>>> OS::Linux::ManagementNode >>>>>>>> OS object created, address: 2417400 >>>>>>>> 2012-03-07 >>> 14:49:31|12372|1:1|image|Module.pm:new(192)|VCL::image >>>>>>>> object >>>>>>>> created for state image, address: 223a460 >>>>>>>> 2012-03-07 >>> 14:49:31|12372|1:1|image|State.pm:initialize(86)|obtained >>>>>>>> a >>>>>>>> database handle for this state process, stored as $ENV{dbh} >>>>>>>> 2012-03-07 >>> 14:49:31|12372|1:1|image|State.pm:check_image_os(762)|no >>>>>>>> corrections need to be made to image OS: rh5image >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|DataStructure.pm:is_parent_reservation(991)|r >>>>>>>> et >>>>>>>> u >>>>>>>> rning >>>>>>>> true: parent reservation ID for this request: 1 >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7098)|reservatio >>>>>>>> n >>>>>>>> count: 1 >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7117)|PARENTIMAG >>>>>>>> E: >>>>>>>> 1 >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7118)|SUBIMAGE: >>>>>>>> 0 >>>>>>>> 2012-03-07 >>>>>>>> >>> 14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7136)|renamed >>>>>>>> process >>>>>>>> to 'vcld 1:1 image 6100a rh5image-rh6xcat5-v0 admin' >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|DataStructure.pm:is_parent_reservation(991)|r >>>>>>>> et >>>>>>>> u >>>>>>>> rning >>>>>>>> true: parent reservation ID for this request: 1 >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|DataStructure.pm:is_parent_reservation(991)|r >>>>>>>> et >>>>>>>> u >>>>>>>> rning >>>>>>>> true: parent reservation ID for this request: 1 >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|Module.pm:create_os_object(298)|VCL::Module:: >>>>>>>> OS >>>>>>>> : >>>>>>>> :Linux >>>>>>>> module loaded >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(335)|management >>>>>>>> node >>>>>>>> OS object has already been created, address: 2417400, >>> returning 1 >>>>>>>> 2012-03-07 >>>>>>>> >>> 14:49:31|12372|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux >>>>>>>> object >>>>>>>> created for image rh5image-rh6xcat5-v0, address: 241a3b0 >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|Module.pm:create_os_object(304)|VCL::Module:: >>>>>>>> OS >>>>>>>> : >>>>>>>> :Linux >>>>>>>> OS object created for rh5image-rh6xcat5-v0, address: 241a3b0 >>>>>>>> 2012-03-07 >>> 14:49:31|12372|1:1|image|xCAT.pm:initialize(110)|XCATROOT >>>>>>>> environment variable is not set, using /opt/xcat >>>>>>>> |12372|1:1|image| ---- WARNING ---- >>>>>>>> |12372|1:1|image| 2012-03-07 >>>>>>>> 14:49:31|12372|1:1|image|xCAT.pm:initialize(119)|unable to >>> initialize >>>>>>>> xCAT >>>>>>>> module, /opt/xcat directory does not exist >>>>>>>> |12372|1:1|image| ( 0) xCAT.pm, initialize (line: 119) >>>>>>>> |12372|1:1|image| (-1) xCAT.pm, (eval) (line: 3239) >>>>>>>> |12372|1:1|image| (-2) (eval 156), (eval) (line: 3) >>>>>>>> |12372|1:1|image| (-3) base.pm, import (line: 91) >>>>>>>> |12372|1:1|image| (-4) xCAT2.pm, BEGIN (line: 47) >>>>>>>> |12372|1:1|image| (-5) xCAT.pm, (eval) (line: 0) >>>>>>>> 2012-03-07 >>> 14:49:31|12372|1:1|image|xCAT2.pm:initialize(110)|XCATROOT >>>>>>>> environment variable is not set, using /opt/xcat >>>>>>>> |12372|1:1|image| ---- WARNING ---- >>>>>>>> |12372|1:1|image| 2012-03-07 >>>>>>>> 14:49:31|12372|1:1|image|xCAT2.pm:initialize(119)|unable to >>>>>>>> initialize >>>>>>>> xCAT >>>>>>>> module, /opt/xcat directory does not exist >>>>>>>> |12372|1:1|image| ( 0) xCAT2.pm, initialize (line: 119) >>>>>>>> |12372|1:1|image| (-1) xCAT2.pm, (eval) (line: 2178) >>>>>>>> |12372|1:1|image| (-2) (eval 155), BEGIN (line: 2) >>>>>>>> |12372|1:1|image| (-3) xCAT2.pm, (eval) (line: 0) >>>>>>>> |12372|1:1|image| (-4) xCAT2.pm, (eval) (line: 0) >>>>>>>> |12372|1:1|image| (-5) Module.pm, create_provisioning_object >>> (line: >>>>>>>> 415) >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|Module.pm:create_provisioning_object(420)|VCL >>>>>>>> :: >>>>>>>> M >>>>>>>> odule::Provisioning::xCAT2 >>>>>>>> module loaded >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(335)|management >>>>>>>> node >>>>>>>> OS object has already been created, address: 2417400, >>> returning 1 >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|Module.pm:new(200)|VCL::Module::Provisioning: >>>>>>>> :x >>>>>>>> C >>>>>>>> AT2 >>>>>>>> object created for computer 6100a, address: 241a548 >>>>>>>> 2012-03-07 >>> 14:49:31|12372|1:1|image|xCAT2.pm:initialize(110)|XCATROOT >>>>>>>> environment variable is not set, using /opt/xcat >>>>>>>> |12372|1:1|image| ---- WARNING ---- >>>>>>>> |12372|1:1|image| 2012-03-07 >>>>>>>> 14:49:31|12372|1:1|image|xCAT2.pm:initialize(119)|unable to >>>>>>>> initialize >>>>>>>> xCAT >>>>>>>> module, /opt/xcat directory does not exist >>>>>>>> |12372|1:1|image| ( 0) xCAT2.pm, initialize (line: 119) >>>>>>>> |12372|1:1|image| (-1) Module.pm, new (line: 207) >>>>>>>> |12372|1:1|image| (-2) Module.pm, create_provisioning_object >>> (line: >>>>>>>> 423) >>>>>>>> |12372|1:1|image| (-3) State.pm, initialize (line: 117) >>>>>>>> |12372|1:1|image| (-4) Module.pm, new (line: 207) >>>>>>>> |12372|1:1|image| (-5) vcld, make_new_child (line: 564) >>>>>>>> |12372|1:1|image| ---- WARNING ---- >>>>>>>> |12372|1:1|image| 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|Module.pm:create_provisioning_object(431)|pro >>>>>>>> vi >>>>>>>> s >>>>>>>> ioning >>>>>>>> object could not be created, returning 0 >>>>>>>> |12372|1:1|image| ( 0) Module.pm, create_provisioning_object >>> (line: >>>>>>>> 431) >>>>>>>> |12372|1:1|image| (-1) State.pm, initialize (line: 117) >>>>>>>> |12372|1:1|image| (-2) Module.pm, new (line: 207) >>>>>>>> |12372|1:1|image| (-3) vcld, make_new_child (line: 564) >>>>>>>> |12372|1:1|image| (-4) vcld, main (line: 346) >>>>>>>> |12372|1:1|image| ---- WARNING ---- >>>>>>>> |12372|1:1|image| 2012-03-07 >>>>>>>> 14:49:31|12372|1:1|image|State.pm:initialize(118)|failed to >>> create >>>>>>>> provisioning object >>>>>>>> |12372|1:1|image| ( 0) State.pm, initialize (line: 118) >>>>>>>> |12372|1:1|image| (-1) Module.pm, new (line: 207) >>>>>>>> |12372|1:1|image| (-2) vcld, make_new_child (line: 564) >>>>>>>> |12372|1:1|image| (-3) vcld, main (line: 346) >>>>>>>> 2012-03-07 >>> 14:49:31|12372|1:1|image|State.pm:DESTROY(829)|VCL::image >>>>>>>> destructor called, address: 223a460 >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|utils.pm:delete_computerloadlog_reservation(6 >>>>>>>> 74 >>>>>>>> 2 >>>>>>>> )|removing >>>>>>>> computerloadlog entries matching loadstate = begin >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|utils.pm:delete_computerloadlog_reservation(6 >>>>>>>> 78 >>>>>>>> 9 >>>>>>>> )|deleted >>>>>>>> rows from computerloadlog for reservation id=1 >>>>>>>> 2012-03-07 >>> 14:49:31|12372|1:1|image|State.pm:DESTROY(848)|number of >>>>>>>> database >>>>>>>> handles state process created: 1 >>>>>>>> 2012-03-07 >>> 14:49:31|12372|1:1|image|State.pm:DESTROY(876)|VCL::image >>>>>>>> process >>>>>>>> duration: 0 seconds >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|DataStructure.pm:get_computer_private_ip_addr >>>>>>>> es >>>>>>>> s >>>>>>>> (1581)|attempting >>>>>>>> to retrieve private IP address for computer: 6100a >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|DataStructure.pm:get_computer_private_ip_addr >>>>>>>> es >>>>>>>> s >>>>>>>> (1585)|retrieved >>>>>>>> contents of /etc/hosts on this management node, contains 9 >>> lines >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|DataStructure.pm:get_computer_private_ip_addr >>>>>>>> es >>>>>>>> s >>>>>>>> (1645)|returning >>>>>>>> IP address from /etc/hosts file: 10.0.0.25 >>>>>>>> 2012-03-07 >>> 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2703)|unable >>>>>>>> to >>>>>>>> use >>>>>>>> database handle stored in $ENV{dbh} >>>>>>>> 2012-03-07 >>> 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2760)|database >>>>>>>> handle >>>>>>>> stored in $ENV{dbh} >>>>>>>> 2012-03-07 >>>>>>>> 14:49:31|12372|1:1|image|utils.pm:is_inblockrequest(6163)|zero >>>>>>>> rows were returned from database select >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|DataStructure.pm:get_image_affiliation_name(2 >>>>>>>> 03 >>>>>>>> 5 >>>>>>>> )|image >>>>>>>> owner id: 1 >>>>>>>> 2012-03-07 >>> 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2709)|database >>>>>>>> requested (information_schema) does not match handle stored >>> in >>>>>>>> $ENV{dbh} >>>>>>>> (vcl:localhost) >>>>>>>> 2012-03-07 >>> 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2760)|database >>>>>>>> handle >>>>>>>> stored in $ENV{dbh} >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|DataStructure.pm:retrieve_user_data(1352)|att >>>>>>>> em >>>>>>>> p >>>>>>>> ting >>>>>>>> to retrieve and store data for user: user.id = '1' >>>>>>>> 2012-03-07 >>> 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2709)|database >>>>>>>> requested (vcl) does not match handle stored in $ENV{dbh} >>>>>>>> (information_schema:localhost) >>>>>>>> 2012-03-07 >>> 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2760)|database >>>>>>>> handle >>>>>>>> stored in $ENV{dbh} >>>>>>>> 2012-03-07 >>>>>>>> >>>>>>>> >>> 14:49:31|12372|1:1|image|DataStructure.pm:retrieve_user_data(1415)|dat >>>>>>>> a >>>>>>>> has >>>>>>>> been retrieved for user: admin (id: 1) >>>>>>> >>>>>> >>>>> >>>> >>>> >>>> >>>> -- >>>> Dmitri Chebotarov >>>> Virtual Computing Lab Systems Engineer, TSD - Ent Servers & Messaging >>>> 223 Aquia Building, Ffx, MSN: 1B5 >>>> Phone: (703) 993-6175 >>>> Fax: (703) 993-3404 >>> >> >> >> > -- Dmitri Chebotarov Virtual Computing Lab Systems Engineer, TSD - Ent Servers & Messaging 223 Aquia Building, Ffx, MSN: 1B5 Phone: (703) 993-6175 Fax: (703) 993-3404
