Kartsa schrieb:
> Rainer Zocholl kirjoitti:
>> [EMAIL PROTECTED](Kartsa) 10.02.08 10:37
>>
>>> What different wakeupmethods are there? I've built a few vdr boxes and
>>> I've been forced to use different motherboards and they do not all
>>> work the same. I've used nvram-wakeup on some and acpi on others when
>>> nvram-wakeup has not worked. Now I have Biostar 945GZ 775 SE with
>>> which I'm having trouble in starting on timers.
>>>
>> What problems? Be spezific.
>>
> At the time writing I was not really asking help, just qurious what
> methods people use. This is why I did not put any detailed info. Maybe I
> should not have mentioned about problems I at that time.
>
> Now I see that I should have added more info because I'm not yet happy
> with my settings. I would have used acpi and it was my first attempt but
> the board did not wake up.
>
> from vdr-shutdown.sh
> -------------------
> file=/var/lib/vdr/acpi-wakeup
> rm -f $file
> if [ ${1:-0} -gt 0 -a -e /proc/acpi/alarm ] ; then
> date -d "1970-01-01 UTC $1 sec -$delay min" +"%Y-%m-%d %H:%M:%S" > $file
> fi
> exec sudo /sbin/shutdown -h now
> --------------------
>
> and from halt.local (this is what is instructed in vdr README.package)
> --------------------
> #!/bin/bash
> wakeupfile=/var/lib/vdr/acpi-wakeup
> trap "rm -f $wakeupfile" EXIT
> if [ -s $wakeupfile -a -w /proc/acpi/alarm ] ; then
> echo -n "Setting ACPI wakeup for next VDR timer: " ; cat $wakeupfile
> cat $wakeupfile > /proc/acpi/alarm
> fi
> -------------------
> But it does not wake up. And this is not a very old mb. So I assume I am
> doing something wrong or not doing something I should.
> I got it to boot up using nvram-wakeup with reboot option (after guess
> helper). But as said nvram should be obsolete and replaced by acpi.
>
> On another mb (4CoreDual-Sata23) I used
> -------------------
> newtime=$(($1 - delay*60 )) # delay minutes earlier
> echo $newtime > /sys/class/rtc/rtc0/wakealarm
> -------------------
> which did the trick.
>
> On biostar there were no /sys/class/rtc
>
> So I tried from http://www.vdr-wiki.de/wiki/index.php/ACPI_Wakeup (as
> someone mentioned in this thread)
>
> --------------
> #!/bin/bash
>
> # Startet dem Rechner nach 3 min ueber acpi neu.
>
> min=`date "+%M"`
> nextmin=`expr $min + 3`
> nextboot=`date "+%Y-%m-%d %H:"$nextmin:00`
> echo $nextboot > /proc/acpi/alarm
>
> echo "Aktuelle Zeit: "`date "+%Y-%m-%d %H:%M:%S"`
> echo "Starte Rechner neu um: "`cat /proc/acpi/alarm`
> echo "Fahre Rechner nun runter."
>
> busybox poweroff
> #/usr/bin/poweroff.pl
> #poweroff
> ---------------
>
> I can read germany but I do not understand it :). But understood that I
> could use that script to test acpi. Well this did not work. I did check
> that the time was actually written in /proc/acpi/alarm. Still not waking up.
>
> So where do I go here? Do I use nvram-wakeup which IMHO is not good
> because of the reboot.
>
> \\Kartsa
>
> _______________________________________________
> vdr mailing list
> vdr@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
Hallo,
yum MUST disable RTC-Wakeup in the BIOS of your motherboard. In my case I MUST
write the wakeuptime
twice:
example:
----------------------------------------------------------------------------
if [ ! -z $1 ]; then
newtime=$(($1 - 60 )) # 1 minutes earlier
logger "VDR-Timer: $1"
logger "BIOS-Timer: $newtime"
echo $(/bin/unix2iso8601 -u $newtime) >/proc/acpi/alarm
echo $(/bin/unix2iso8601 -u $newtime) >/proc/acpi/alarm
logger "ACPI-Read: $(cat /proc/acpi/alarm)"
else
logger "VDR-Timer: keine Zeitübergabe"
fi
----------------------------------------------------------------------------
dhe.
--
__\/__
. / ^ _ \ .
|\| (o)(o) |/|
#----------------.OOOo--oo--oOOO.-----------#
# #
# [EMAIL PROTECTED] #
# #
#_________________________Oooo._____________#
.oooO ( )
( ) ) /
\ ( (_/
\_)
_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
