On Sat, Sep 20, 2008 at 03:41:23PM +0300, Josce wrote:
> I have also noted that sometimes when I boot my pc the eHD card gets an IRQ
> 255.
>
> [EMAIL PROTECTED] tv]#lcpci -v
> 03:0f.0 Multimedia controller: Micronas USA, Inc. Unknown device 8100
> Subsystem: Micronas USA, Inc. Unknown device 8100
> Flags: medium devsel, IRQ 255
> Memory at dfc00000 (32-bit, non-prefetchable) [disabled] [size=4K]
> Memory at 20000000 (32-bit, non-prefetchable) [disabled] [size=128M]
> Capabilities: [40] Power Management version 2
>
> When this happens I can't start the card:
>
> [EMAIL PROTECTED] tv]# modprobe hdshm
> [EMAIL PROTECTED] tv]# /usr/local/src/eHD/hdboot -i
> /usr/local/src/eHD/linux.bin
> Decypher PCI BAR1: 20000000
> Warm Reset
> Timeout: U-Boot not ready for PCI boot
> [EMAIL PROTECTED] tv]#
>
> Could my card be defect?
There is a reset circuit on the that controls the complicated power
sequencing. It is possible that your BIOS is too fast and configures the PCI
space during this powerup sequence. At that time, the HDE is not properly
accessible.
It is possible to shorten this sequence a bit, but for that you need to
exchange a SMD capacitor on the HDE board.
--
Georg Acher, [EMAIL PROTECTED]
http://www.lrr.in.tum.de/~acher
"Oh no, not again !" The bowl of petunias
_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
