В сообщении от 29 September 2008 00:29:17 gimli написал(а): > Hi, > > I'm on Astra 19.2 and tested the following HD transponders : > Anixe HD > Arte HD > Astra HD+ > > first test results : > > Arte HD tunes ok and plays fine. > > On Astra HD+ and Anixe HD im getting an error : > > Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() FE_SET_PROPERTY > Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() properties.num = 8 > Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() properties.props = > 0000000041b31dc0 > Sep 28 23:27:28 archvdr dtv_property_process_set() > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000011 > (DTV_DELIVERY_SYSTEM) > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000005 > Sep 28 23:27:28 archvdr dtv_property_process_set() > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000003 > (DTV_FREQUENCY) > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00140cd0 > Sep 28 23:27:28 archvdr dtv_property_process_set() > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000004 > (DTV_MODULATION) > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000000 > Sep 28 23:27:28 archvdr dtv_property_process_set() > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000008 > (DTV_SYMBOL_RATE) > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x01a39de0 > Sep 28 23:27:28 archvdr dtv_property_process_set() > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000009 > (DTV_INNER_FEC) > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x0000000b > Sep 28 23:27:28 archvdr dtv_property_process_set() > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000006 > (DTV_INVERSION) > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000002 > Sep 28 23:27:28 archvdr dtv_property_process_set() > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x0000000d > (DTV_ROLLOFF) > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000002 > Sep 28 23:27:28 archvdr dtv_property_process_set() > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000001 > (DTV_TUNE) > Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000000 > Sep 28 23:27:28 archvdr dtv_property_process_set() Finalised property cache > Sep 28 23:27:28 archvdr dtv_property_cache_submit() > Sep 28 23:27:28 archvdr dtv_property_cache_submit() adv, modulation = 0 > Sep 28 23:27:28 archvdr dtv_property_adv_params_sync() > Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() Property cache is > full, tuning > > If you need further informations let me know. > > cu > > Edgar (gimli) Hucek > > > В сообщении от 28 September 2008 17:12:14 Niels Wagenaar написал(а): > >> Hi Igor, > >> > >> Small question. I tried your patch, but it fails a hunk in dvbdevice.c. > >> I > >> added this hunk manually but I think something is missing: > >> > >> Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,251): Operation not > >> supported Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,252): > >> Operation not supported Sep 28 13:56:15 htpc vdr: [19486] ERROR: > >> frontend > >> 0: Invalid argument > >> > >> Those both lines has the following code: > >> > >> CHECK(ioctl(fd_frontend, FE_SET_VOLTAGE, volt)); > >> CHECK(ioctl(fd_frontend, > >> FE_SET_TONE, tone)); > >> > >> The result is, no tuning and no picture. > >> > >> And to be honest, I don't really understand why it shouldn't work. > >> Mainly, > >> since the same code is used with the Kaffeine patch (I'm comparing that > >> also). > >> > >> Any help is appreciated :) If you need a quick chat, I'm currently in > >> #linuxtv on irc.freenode.net :) > >> > >> Regards, > >> > >> Niels Wagenaar > >> > >> > -----Oorspronkelijk bericht----- > >> > Van: Igor M. Liplianin [mailto:[EMAIL PROTECTED] > >> > Verzonden: zondag 28 september 2008 12:49 > >> > Aan: vdr@linuxtv.org; Niels Wagenaar > >> > CC: Gregoire Favre; [EMAIL PROTECTED] > >> > Onderwerp: [vdr][PATCH] S2API for vdr-1.7.0(1.7.1) quick hack > >> > > >> > ? ????????? ?? 24 September 2008 18:34:01 Niels Wagenaar ???????(?): > >> > > Hello all (and especially Klaus): > >> > > > >> > > It's official, the people from V4L have voted for the usage of the > >> > > S2API proposal to be the future for new DVB API improvements (see > >> > > the official announcement at the bottom) within the V4L tree. > >> > > Currently S2API is in a real speed-train and new devices are added > >> > > very > >> > > >> > rapidly. > >> > > >> > > Only the devices currently in Multiproto and written by Manu Abraham > >> > > >> > are not yet ported. > >> > > >> > > Also people are allready busy with patches for Kaffeine (allready > >> > > done) and MythTV (not seen yet, but it's WIP according to a post on > >> > > the linux-dvb mailinglist). > >> > > > >> > > So, this should mean that VDR 1.7.x should focus on S2API because of > >> > > the obvious reasons. Has anybody started on a patch of somekind to > >> > > include S2API in VDR 1.7.0 or 1.7.1? Mainly I was thinking of doing > >> > > >> > it > >> > > >> > > myself (I have a Hauppauge WinTV-NOVA-HD-S2 which is allready > >> > > supported in S2API) in the hope to have it working in the next > >> > > weekend. But if it's allready done or in progress, then I would like > >> > > to use my time for something else ;) > >> > > > >> > > Regards, > >> > > > >> > > Niels Wagenaar > >> > > >> > Hi Niels > >> > > >> > S2API for vdr-1.7.0(1.7.1) quick hack > >> > Patch is ugly and only supported DVB-S. But it is useful to begin. > >> > You may modify it like you wish. > >> > > >> > Igor > >> > >> _______________________________________________ > >> vdr mailing list > >> vdr@linuxtv.org > >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > > > V.2 > > Only satellite, as I have not any cable or terrestrial, but it is easy to > > modify :-) > > I test it with cx24116 based card (though without ISL chip) and didn't > > find > > any troubles. > > > > Igor > > _______________________________________________ > > vdr mailing list > > vdr@linuxtv.org > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > _______________________________________________ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
BTW, did you put actual(ones from your actual repository, from wich drivers was compiled, for example s2/linux/include/linux/dvb) dvb headers in /usr/include/linux/dvb from before compiling VDR ? You can see on http://linuxtv.org/hg/~stoth/s2 that headers was changed 25 Sep -- Igor M. Liplianin _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
