I assume from your email that the master is also the media server. Have you tried telnet <client | master> bpcd from both ends. If you run bpgetconfig -M <client> from the master what are the results?
If the master is not the media server can the client see it and vise versa? Regards, Patrick Whelan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brooks, Jason Sent: 10 September 2007 16:15 To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Status 57 - Resolutions? I've been getting Status 57s on a host since we added it to the NBU environment. Here's the setup: Master server: Windows2K3, SP2 with NBU 6.0MP4 Client: Windows2K3 Enterprise, R2 SP2 with 6.0MP4 client Anytime a backup is initiated, it ends with a 57. Looking at the BPCD logs, here's what I see: 10:31:38.505 [3152.1472] <2> logconnections: BPCD ACCEPT FROM 192.168.64.169.1952 TO 192.168.64.206.13724 10:31:38.505 [3152.1472] <2> bpcd main: setup_sockopts complete 10:31:38.521 [3152.1472] <2> bpcd peer_hostname: Connection from host master.longwood.edu (192.168.64.169) port 1952 10:31:38.521 [3152.1472] <2> bpcd valid_server: comparing master and master.longwood.edu 10:31:38.521 [3152.1472] <4> bpcd valid_server: hostname comparison succeeded 10:31:38.708 [3152.1472] <2> bpcd main: output socket port number = 1 10:31:39.021 [3152.1472] <2> bpcd main: Duplicated vnetd socket on stderr 10:31:39.021 [3152.1472] <2> bpcd main: <---- NetBackup 6.0 0 ------------initiated 10:31:39.021 [3152.1472] <2> bpcd main: Not using VxSS authentication with master.longwood.edu 10:31:39.177 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST 10:31:39.458 [3152.1472] <2> bpcd main: BPCD_GET_NB_VERSION_RQST 10:31:39.458 [3152.1472] <4> bpcd main: Version string is NetBackup 6.0 600000"C:\ProgramFiles\VERITAS\NetBackup\bin" 10:31:39.677 [3152.1472] <2> bpcd main: BPCD_GET_BE_VERSION_RQST 10:31:39.677 [3152.1472] <4> bpcd main: Backup Exec Config key not found. 10:31:39.677 [3152.1472] <4> bpcd main: Version string is NetBackup 6.0 600000"C:\ProgramFiles\VERITAS\NetBackup\bin" 10:31:39.942 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST 10:31:40.271 [3152.1472] <2> bpcd main: BPCD_READ_HOST_CONFIG_RQST 10:31:40.880 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST 10:31:41.114 [3152.1472] <2> bpcd main: BPCD_GET_PRIVILEGES_RQST 10:31:41.427 [3152.1472] <2> bpcd main: BPCD_GET_PLATFORM_RQST 10:31:41.755 [3152.1472] <2> bpcd main: BPCD_GET_UNAME_RQST 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_SYSNAME = WindowsNET 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_NODENAME = CLIENT1 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_RELEASE = 5 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_VERSION = 2 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_MACHINE = Intel x86 - Unknown - Revision x403 10:31:41.755 [3152.1472] <2> getUnameInfo: END 10:31:41.989 [3152.1472] <2> bpcd main: BPCD_DISCONNECT_RQST 10:31:41.989 [3152.1472] <2> bpcd exit_bpcd: exit status ----------->exiting By this, I can't see that it fails. Is it dumping to another service and failing there? The only other thing I have logging is bpbkar and vnetd, and there's nothing there. I've retried with loglevel at 5, but still nothing. The firewall isn't turned on on the client, so I'm at a loss. Suggestions? Thanks, Jason ------------ Jason Brooks Computer Systems Engineer IITS - Longwood University voice - (434) 395-2034 fax - (434) 395-2035 mailto:<[EMAIL PROTECTED]> _______________________________________________ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu