Maybe looking at the Veritas logs while the disk group commands run would
give you a hint...

In /var/adm/vx/

Jon



On Tue, Oct 7, 2008 at 1:59 PM, Kirubakaran Kaliannan <
[EMAIL PROTECTED]> wrote:

>
> Hi,
>
> What is the storage vendor you are using and is it configured as A/P or
> A/PF ?
>
> Taking 5 minutes is probably the due to tress pass.
> The reasons could be,
> 1. not have the proper ASL/APM for the storage on both the nodes
> (including the failover node).
> 2. are both nodes are on a CVM configuration ? if they are not, then
> there will not be any co-ordination between the nodes to avoid tress
> pass.
> 3. check for the array configured as in HCL.
>
> Please let us know, if you still have the issue after verifying the
> above.
>
> Thanks
> -kiru
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Bryan
> Bahnmiller
> Sent: Tuesday, October 07, 2008 11:42 AM
> To: veritas-vx@mailman.eng.auburn.edu
> Subject: [Veritas-vx] VxVM disk group commands take too long
>
> Hello all,
>
>   I have a situation where one system is taking a long time to scan for
> disk groups. I have a VCS cluster in a 4+1 configuration. I have
> recently added the last production node to the cluster. After the disks
> were presented to the failover node, it took a long time for any Vx
> commands to respond.
>
>  The servers are all Solaris 10, the cluster, VxVM and VxFS are all
> 5.0mp1. The server that I added was one we had used for testing and had
> many different luns presented and removed from it. But it will import
> and deport the disk group just fine. The other server, the failover node
> in the cluster, takes about 5 minutes to import the dg. If I do a
> "vxdisk -o alldgs list" on the failover node, it takes about 5 minutes
> to respond. Any way I look at the devices, it looks clean. Whether I
> look at them with cfgadm, luxadm, vxdisk or PowerPath, the disks look
> ok. So anytime I do any vx commands on the failover node, I get VCS
> monitoring timeout errors for monitoring the dg's.
>
>  Anyone have suggestions?
>
>     Thanks,
>     Bryan
>
> --
> Bryan Bahnmiller
>
>
> _______________________________________________
> Veritas-vx maillist  -  Veritas-vx@mailman.eng.auburn.edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-vx
>
> _______________________________________________
> Veritas-vx maillist  -  Veritas-vx@mailman.eng.auburn.edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-vx
>
> _______________________________________________
> Veritas-vx maillist  -  Veritas-vx@mailman.eng.auburn.edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-vx
>
_______________________________________________
Veritas-vx maillist  -  Veritas-vx@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-vx

Reply via email to