The following patch adds PCI vendor/device information for the
FlyVIDEO2000. These boards are hard-wired for NTSC/PAL/SECAM. I hope
there is some way to tell them apart. Right now my NTSC board is
detected as PAL (the default). Perhaps I can compare the
revision or subdevice number with someone that owns a PAL version to
see if they differ. The revision number of my board (at address 0x08
in the PCI config) is 0x01. Subvendor is 0x5168. Subdevice is 0x0138.
Cheers,
Shaun
--- saa7134-0.2.2/saa7134-cards.c Fri Nov 8 07:48:01 2002
+++ saa7134-0.2.2-sdj/saa7134-cards.c Mon Dec 23 14:08:23 2002
@@ -372,6 +372,12 @@
.subvendor = 0x153B,
.subdevice = 0x1143,
.driver_data = SAA7134_BOARD_CINERGY600,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7130,
+ .subvendor = 0x5168,
+ .subdevice = 0x0138,
+ .driver_data = SAA7134_BOARD_FLYVIDEO2000,
},{
/* --- boards without eeprom + subsystem ID --- */
--
video4linux-list mailing list
Unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/video4linux-list
