Hi...
I've an Avermedia TVCapture98 w/VCR. This is a card with a PAL B/G
tuner, and NICAM stereo support. I live in Spain, here we have TV
PAL and NICAM for stereo/dual audio.
The card has the following chip: "MSP 3410D B4", so I suppose it's
a msp3410D-B4.
The card is detected by bttv as a "TVPhone98", but forcing with
card=13 makes no difference. And sound doesn't work at all, the
msp3400 chip isn't detected.
I've tried with 2.2.16; now with 2.4.0-test4 and bttv-0.7.37.
Video works ok with both.
bttv: driver version 0.7.37 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Bt8xx card found (0).
bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 80, irq: 9, memory: 0xdf001000.
bttv0: gpio: out_enable=0x0, data=0x477c3, in=0x0
i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing...
i2c-algo-bit.o:1 scl: 1 sda: 0
i2c-algo-bit.o:2 scl: 1 sda: 1
i2c-algo-bit.o:3 scl: 0 sda: 1
i2c-algo-bit.o:4 scl: 1 sda: 1
i2c-algo-bit.o: bt848 #0 passed test.
i2c-dev.o: Registered 'bt848 #0' as minor 0
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: i2c: checking for eeprom @ 0xa0... found
bttv0: dump eeprom @ 0xa0
00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
40: ff 40 19 ff ff ff ff ff ff ff ff ff ff ff ff ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff 00 04 14 61
bttv0: card id: AVerMedia TVPhone98 (0x00041461) => card=41
bttv0: model: BT878(AVerMedia TVPhone 98) [autodetected]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA8425 @ 0x82... not found
bttv0: i2c: checking for TDA9840 @ 0x84... not found
bttv0: i2c: checking for TDA985x @ 0xb6... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0x61
bttv0: i2c attach [Philips PAL]
i2c-core.o: client [Philips PAL] registered to adapter [bt848 #0](pos. 0).
lspci -v:
00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
Subsystem: Avermedia Technologies Inc: Unknown device 0004
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at df001000 (32-bit, prefetchable) [size=4K]
00:0a.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02)
Subsystem: Avermedia Technologies Inc: Unknown device 0004
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at df002000 (32-bit, prefetchable) [size=4K]
Module options:
options bttv bttv_verbose=2
options tuner type=5 debug=1
options msp3400 simple=1 once=1 debug=2
# tried the following, too:
#options bttv card=13 bttv_verbose=2
#options msp3400 simple=0 once=1 debug=2
I would apreciate any help.
Salud,
--
Roberto Lumbreras E.T.S.I. Telecomunicaci�n
[EMAIL PROTECTED] U.P.M., Madrid, Spain
[EMAIL PROTECTED] Debian Developer
--
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
