Kuy Bicol wrote:
>
> Hi !
>
> Has anyone successfully configured WinTV GO pci card in RH
> 7.0?
>
> I just installed this card on my multi-boot machine (RH
> 7.0, Win95, WinNT) and got it working in Win95. Will try to
> do it in Redhat later this week.
>
> Could anyone give us some hints and suggestions???
>
> Thanks a lot,
> Kuy
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Photos - Share your holiday photos online!
> http://photos.yahoo.com/
>
> _______________________________________________
> Video4linux-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/video4linux-list# bttv
Hi
You should not have any problems with this card. I have never installed
the WinTv GO card but I do have a win theater which is similar. I run it
on RH 7.0 you should only have to insert the correct modules to get your
card working. Something like the below
alias char-major-81 videodev
options bttv card=10 autoload=1 radio=1 pll=1
options tuner type=5
options msp3400 once=1 simple=1
pre-install bttv
post-remove bttv (/sbin/modprobe -r "tuner"; /sbin/modprobe -r
"msp3400")
I am not sure what state your kernel is in. Before you even edit your
/etc/modules.conf
Try
> cat /proc/modules #to see what modules you have installed
> /sbin/modprobe bttv #to insert the bttv module, it should insert the other modules
>to
> cat /proc/modules #to see what modules bttv inseted
This should get all the required modules inserted.
run a tv application like xawtv and you should be ok.
I am not sure in the exact requirements for /etc/modules.conf though.
John
T
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
