On Dec 5, 8:30 pm, Ken <[EMAIL PROTECTED]> wrote:
> Not sure on the voltages. I've never seen a schematic for
> the things. I have a stack of them and if something needs
> replacing, I just swap parts around.
I had an LC power supply which appeared to have failed. The problem
was that one of the pins on the power supply connector was slightly
raised and no longer making contact with the corresponding pin in the
motherboard power supply connector.
The power supply connector is a pin and housing combination. They
crimp the pins onto the wires and then insert the pins into the nylon
housing. Sometimes the pins come un-inserted. It is possible for the
pin to be up just enough to avoid contact while not being visually
obvious.
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at
http://groups.google.com/group/vintage-macs?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---
