On Mar 12, 8:12 pm, Hal Meeks <[email protected]> wrote: > I recently picked up an Apple Color OneScanner 600/27 and hooked > it up to my Mac IIfx. I am running System 7.5.5 with 32MB RAM and > have installed the Color OneScanner software (ColorOne Dispatch). > The problem I have is that when I want to scan I always get a message > saying that the software cannot detect a scanner even though Scanner > Driver 4.2 is installed during startup. The scanner shows up under > SCSI Probe so I assume there is no issue with termination. I even > switched to the older scan software (Ofoto) and still the scanner is > not recognized. However when I attach an original Color OneScanner > everything works just fine with either scan software. I would > ordinarily think the issue is with the scanner itself but this is the > second 600/27 model I have owned and I have gotten the exact same > results. Is there some other driver or software I am missing that is > peculiar to the 600/27 scanner? Thanks!
The Color OneScanner is sensitive to its SCSI id #. Make sure it is using SCSI id 2. bill --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
