I have a Mac Classic, who's hard disk has died recently. I have a 250mb SCSI IBM 3.5" drive that I pulled from a 6100 where the system board components had started seperating from the system board, causing the system to stop working (Unless weight was applied to the componenets that had de-soldered)
Before I spend the small amount of money and time on my Classic, to get a long enough torx driver to open the case, and the time even opening it, would I be able to use the drive with the Classic, and what OS would be suggested? I can get up to system 10.2 from my repository, even though i know that 10.x won't run --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
