Macintosh Classic starts at System 6 and ends with System 7 On Wed, Apr 15, 2009 at 5:26 AM, Brad McCartney <[email protected]>wrote:
> I believe you can go sys. 7.1 up to 9.2.2 on a classic. I'm running 8.6 on > a Performa 6400/180 > > > On Tue, Apr 14, 2009 at 8:23 PM, Christian Wacker > <[email protected]>wrote: > >> >> I have a Mac Classic, who's hard disk has died recently. I have a >> 250mb SCSI IBM 3.5" drive that I pulled from a 6100 where the system >> board components had started seperating from the system board, causing >> the system to stop working (Unless weight was applied to the >> componenets that had de-soldered) >> >> Before I spend the small amount of money and time on my Classic, to >> get a long enough torx driver to open the case, and the time even >> opening it, would I be able to use the drive with the Classic, and >> what OS would be suggested? I can get up to system 10.2 from my >> repository, even though i know that 10.x won't run >> >> >> > > > > -- Level Two Admin at Everystuff Tew [sa-mp] --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
