I am fairly certain that you need it on both, the extensions are small, should fit easily on a 800k floppy.
-------------------------------------------------- From: "Sterling" <[email protected]> Sent: Sunday, June 07, 2009 10:32 PM To: "Vintage Macs" <[email protected]> Subject: Re: Connect Basilisk to Mac Plus Appleshare?? > > Are you sure I have to have stuff on the Mac Plus side? > > That's what I'm trying to avoid. > > I was hoping I could somehow just run the Chooser on the Mac Plus side > and mount the share/disk on the Plus. > > On Jun 7, 8:07 pm, Christian Wacker <[email protected]> wrote: >> Do you have appleshare, filesharing, filesharing monitor, and the >> appletalk extentions? ( I think that is what they are called) you will >> need those on _both_ of the macs in order for them to see and share >> files between one another. I am still trying to get my LCII and >> PowerMac 6100 to talk, but I have only spend an hour or so on it >> before I gave up and decided to wait for the rain to stop so I can >> drag a few more monitors out of the garage... and find another ADB >> cable... >> >> Good luck. >> >> >> >> On Sun, Jun 7, 2009 at 8:27 PM, Sterling<[email protected]> wrote: >> >> > I like talking to myself, lol! >> >> > I think it must be some sort of software incompatibility between 6.0.8 >> > and 7.5.3? >> >> > I've got lights blinking on the Asante now on the Tx and Rx when I >> > open the Chooser on the Plus. >> > So I think it's talking to the AppleTalk network. >> >> > I gave the Share username of Office on my Basilisk (no password) and >> > put Office as the username on the Plus. >> >> > Can someone confirm that there is something else I need to load on the >> > Plus to get this to work? >> > Or is there a way to connect the Plus to the Basilisk without having >> > to load something? >> >> > I've got an SE that I guess I could try, but I think it's running 6.x >> > something too... >> >> > On Jun 7, 7:04 pm, Sterling <[email protected]> wrote: >> >> Ok, I think I am one step closer, but still nothing on the Plus. >> >> >> I installed the Basilisk Ethernet driver and switched to that >> >> interface on my computer in the Basilisk setup. >> >> I changed the System on the Basilisk to use a correct IP for that >> >> private network and I can browse again with iCab. >> >> So I think Basilisk is back online, but this time directly on Ethernet >> >> to the switch. >> >> >> I see more blinking lights on the Asante device now, so I'm guessing >> >> my Basilisk is chattering Appletalk on the ethernet... >> >> >> But on the Plus side I don't see anything and on the Asante I don't >> >> see the Tx light doing anything. >> >> >> Again I tried plugging the D9 connector in the Printer and the Modem >> >> but still nothing. >> >> >> Am I missing something on the software side now? >> >> >> On Jun 7, 6:44 pm, Sterling <[email protected]> wrote: >> >> >> > Wow, I've bought another Mac Plus off Ebay... >> >> >> > It was nice though, advertised as just a Plus, but someone had >> >> > modified and put a fan, lock bar and 4MB of memory in it. >> >> >> > Anywho, I am not working on my process of connecting up my older >> >> > Macs >> >> > on system 6.0.8 to my Basilisk emulator on my PC. >> >> >> > But I must not be understanding something or something is not >> >> > connecting. >> >> >> > This is what I have: >> >> >> > Basilisk properly connected to my ethernet (iCab is running and >> >> > browsing just fine) on my switch. >> >> > My Plus is connected to an Asantetalk D9 to Ethernet converter. >> >> >> > In Basilisk I have 7.5.3 r2 running and turned on file sharing and >> >> > shared a folder. >> >> > On the Plus I pull up Choser and AppleTalk is on, but nothing is in >> >> > the window. >> >> > I'm not seeing any lights blinking on the Asante when I pull up the >> >> > Chooser so I'm guessing the Mac isn't bothering to talk to the >> >> > network >> >> > yet? >> >> >> > I've swapped the D9 in the Printer and Modem ports, and swapped >> >> > cables >> >> > and swapped Asante units (have two from Ebay). >> >> >> > The only thing I can think of is maybe the Basilisk in 'Router' mode >> >> > is dropping layer2 traffic to the ethernet port and killing >> >> > AppleTalk?- Hide quoted text - >> >> >> - Show quoted text -- Hide quoted text - >> >> - Show quoted text - > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
