I cannot for the life of me get the Asante MacCon 30si card to connect to the network on my Mac SE/30.
When I run the Adapter Information it appears to recognise the card as Mac Con 30si, gives the MAC of the card and driver version 7.3.1 in Slot 9. Memory buffer test passes. Network Interface Controller Test returns 'NIC Transmission Failed'. I have this plugged into a 10base T Hub (Dynex). System information is a pretty vanilla install of 7.1 (upgraded from 6.0.5). The System Information page on the Asante software reads 7.10, machine type Mac SE30, Memory 8MB, ROM Ver 1.78 and Appletalk 58.0.2. The lights all light up on the hub and my network and the back of the card just fine. I've configured MacTCP to my proper network addess (Manual). But when I try to switch Appletalk to Ethernet it just gives me the boot and goes back to Localtalk. Is there anyone that has any ideas whatsoever about this??? --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
