I finally got my AsanteTalk LocalTalk to Ethernet box working on this Dynex hub. So at least I am able to use LocalTalk to my Basilisk 'server'.
But I really wish I could get native Ethertalk working! -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Sterling Jacobson Sent: Saturday, August 01, 2009 4:23 PM To: [email protected] Subject: RE: Asante sucks??? The Dynex is an old base10 hub. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Wolf Sent: Saturday, August 01, 2009 4:19 PM To: [email protected] Subject: Re: Asante sucks??? connect it to an old Base10 hub Sterling wrote: > I cannot for the life of me get the Asante MacCon 30si card to connect > to the network on my Mac SE/30. > > When I run the Adapter Information it appears to recognise the card as > Mac Con 30si, gives the MAC of the card and driver version 7.3.1 in > Slot 9. > > Memory buffer test passes. > Network Interface Controller Test returns 'NIC Transmission Failed'. > > I have this plugged into a 10base T Hub (Dynex). > > System information is a pretty vanilla install of 7.1 (upgraded from > 6.0.5). > > The System Information page on the Asante software reads 7.10, machine > type Mac SE30, Memory 8MB, ROM Ver 1.78 and Appletalk 58.0.2. > > The lights all light up on the hub and my network and the back of the > card just fine. > I've configured MacTCP to my proper network addess (Manual). > But when I try to switch Appletalk to Ethernet it just gives me the > boot and goes back to Localtalk. > > Is there anyone that has any ideas whatsoever about this??? > > > > No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.38/2274 - Release Date: 08/01/09 09:38:00 No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.38/2274 - Release Date: 08/01/09 09:38:00 --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
