The Performa 631, which has two SIMM sockets, is expandable to 76 MB using two 80ns 72-pin SIMMs (one source places the limit at 52 MB). * One reader reports installing a 128 MB non-parity 72-pin 80ns SIMM in his 630 and using it reliably.
The top should come off somehow, and you should see two memory slots. Crucial used to sell old EDO/FPM SIMMs, but I dont know if they do any longer. On Tue, Apr 6, 2010 at 3:04 PM, Jawa <[email protected]> wrote: > Okay, how to do that? > > On Apr 6, 8:58 pm, John Musbach <[email protected]> wrote: > > You need to install more ram. > > > > On 4/6/10, Jawa <[email protected]> wrote: > > > > > > > > > Total Memory: 8.192K > > > Systemprograms 2.008K > > > > > Unused: 6.142K > > > > > (roughly translated from Dutch :P ) > > > > > On Apr 6, 8:28 pm, Britt Dodd <[email protected]> wrote: > > >> How much memory do you have on the 630 > > > > >> On Apr 6, 2010 2:27 PM, "Jawa" <[email protected]> wrote: > > > > >> Hello, I have a Performa 630, currently running under 7.1 > > > > >> I have issues installing OS 8. When launching the installer, and > > >> starting the instalation, I get an error message when it is finished > > >> updating the apple harddisk drivers (when the bar is filled): > > > > >> "The Application "Installer" could not be opened because there is not > > >> enough memory available to continue. > > > > >> Try quitting other applications to make more memory available." > > > > >> Any ideas on how to make it work? > > > > >> -- > > >> ----- > > >> You received this message because you are a member of the Vintage Macs > > >> group. > > >> The list FAQ is athttp://lowendmac.com/lists/vintagemacs.shtmlandour > > >> netiquette guide is athttp://www.lowendmac.com/lists/netiquette.shtml > > >> To post to this group, send email to [email protected] > > >> To leave this group, send email to > > >> [email protected]<vintage-macs%[email protected]> > <vintage-macs%[email protected]<vintage-macs%[email protected]> > > > > >> For more options, visit this group > > >> athttp://groups.google.com/group/vintage-macs > > > > >> Support for older Macs:http://lowendmac.com/services/ > > > > >> To unsubscribe, reply using "remove me" as the subject. > > > > > -- > > > ----- > > > You received this message because you are a member of the Vintage Macs > > > group. > > > The list FAQ is athttp://lowendmac.com/lists/vintagemacs.shtmland our > > > netiquette guide is athttp://www.lowendmac.com/lists/netiquette.shtml > > > To post to this group, send email to [email protected] > > > To leave this group, send email to > [email protected]<vintage-macs%[email protected]> > > > For more options, visit this group at > > >http://groups.google.com/group/vintage-macs > > > > > Support for older Macs:http://lowendmac.com/services/ > > > > -- > > Best Regards, > > > > John Musbach > > -- > ----- > You received this message because you are a member of the Vintage Macs > group. > The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our > netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml > To post to this group, send email to [email protected] > To leave this group, send email to > [email protected]<vintage-macs%[email protected]> > For more options, visit this group at > http://groups.google.com/group/vintage-macs > > Support for older Macs: http://lowendmac.com/services/ > -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/
