Guys,
I've got an AVID brand 9 GB drive hooked up to a Mac SE/30. When I
boot a Disk Tools disk (with a patched Apple HD SC Setup 7.5.3)
utility it recognizes the drive, tests it successfully and commences
and initialization, but after about 10-20 minutes of performing the
init, it fails and says the drive can't be initialized.
Is the drive too big to use with the SE/30? How do I init it?
I intend to eventually try to run A/UX (I have a CD ROM drive which
the A/UX installer floppy recognizes and boots from but no cable to
connect both the CD drive and HDD at the same time) so will try the HD
setup utility that ships with that next, is that likely to work?
Sampsa
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To leave this group, send email to [email protected]
For more options, visit this group at
http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
