Does anyone have a picture of the connector? And more info on the pin out? I could probably make an adaptor cable. John
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dylan McDermond Sent: Wednesday, May 09, 2012 7:13 AM To: [email protected] Subject: Re: Willing to trade non-working Macintosh Portable (backlit) and nonworking Powerbook 180 for brief use of working MacPortable On May 9, 2012, at 5:51 AM, Nico Vanden Eynde wrote: > So buy a Conner CP3040A on Ebay or so, swap the PCB and you can read > the content of your Mac Portable drive in any SCSI Mac, as long as the > original drive is not faulty of course. > > I have repaired several Mac portables with a dead hard drive this way > and it works like a charm. I'll chime in to say I've done the same. My Portable is actually running one now. - Dylan -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/
