What resolution are you running? It could be a different aspect ratio resolution than what your widescreen will "see" as something square. 1024x768 is square, and something like 1440x960 is widescreen.
On Thu, Jun 7, 2012 at 10:07 PM, John Carmonne <[email protected]> wrote: > I have a PowerComputing PowerBase 180 with a sonnet G3 300MHz card. I'm using > a HP 22" w2207 display. The video card is ATI Rage 128. My problem is on my > CAD/CAM application the circles are oblong. It seems to me at one time I was > able to correct this problem but I don't remember what I may have done, > Anyone have experience with this? > > > John Carmonne > Yorba Linda CA > 92886 USA > MacBook Pro i7 > > > > > > > -- > ----- > You received this message because you are a member of the Vintage Macs group. > The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our > netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml > To post to this group, send email to [email protected] > To leave this group, send email to [email protected] > For more options, visit this group at > http://groups.google.com/group/vintage-macs > > Support for older Macs: http://lowendmac.com/services/ -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/
