No one would advise you to put it in the bin. Removing the logic board sounds a little a "too-much" approach. If you have a Performa, a dead pram battery could stop it from booting. There are other causes.
With local talk you get a hybrid of Apple serial cable and phone connector. The Chooser shows the connected device if all is working right. With serial cabling, I would sometimes tear my hair out until I realized I wasn't using a bi-directional cable (with arrows on the plug top pointing in two opposite directions. And remember that the phone components need phone plug terminators. Everything else is just a matter of knowing which part is working or defective by testing and switching out. Jeff G. On Thursday, October 24, 2013 11:37 AM, Marek Drvota <marek.drv...@me.com> wrote: Well the battery I've put brand new in showing around 3.6V So the only one left are the caps probably M On Oct 24, 2013, at 8:01 PM, Hardware Mack <hardwarem...@gmail.com> wrote: its not really that strange. The same things happen to LC520/LC550/LC575's when the AB and MB caps go… >i re-cap these all the time. > > >Charles >maccaps.com > > >If you wanted me to do it i can, or you could do it your self. > > > > >PS: >I would assume you have checked the voltage of your PRAM battery? >you always want to make sure your PRAM battery is charged to 3.6v. > > > > > >On Oct 24, 2013, at 1:53 PM, Marek Drvota wrote: > Could be the case - it's quite strange as visually there's nothing out of order .... Once it's up and running everything's just fine M On Oct 24, 2013, at 7:50 PM, Hardware Mack <hardwarem...@gmail.com> wrote: sounds like you are ready for some new caps on that main board sir. > > >also give the rear vent a good sniff… if it smells like fishy, then your AB >needs caps as well. > > >Charles > > > > > > > >On Oct 24, 2013, at 1:46 PM, Marek Drvota wrote: > It seems like something's wrong with my Color Mac. Not only the connection doesn't work but to start it I always need to remove the logic board and then put it back - any ideas here ? I definitely don't want to throw it in the bin just trying to find out how to have (as I can't do anything myself) it fixed CHeers M On Sep 24, 2013, at 12:46 AM, Jeff Walther <t...@prismnet.com> wrote: > >On Monday, September 23, 2013 2:31:15 PM UTC-5, Marek Drvota wrote: > >>Am I doing something wrong or skipped I some steps ? >> >> > >If you're using PhoneNet cabling, check the telephone cable between the >PhoneNet connectors. Make sure it has the yellow and black wires and not >just the red and green wires. There were an awful lot of really cheap 6' >lengths of telephone cord shipped with modems which omitted the yellow and >black conductors to save than 1/2 cent in manufacturing costs. > >Jeff Walther > > -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.