i have one too... just looked at the manual and looks like 84mhz is the best that can do.
witch would be 42mhz... so if you got it to do 45 mhz... and you run norton utilitys and its accurate and stable then keep it that way. if you have not recapped your 840av... then you need to re-cap that asap... i used mine to go from 33mhz in my q800 to 40, seemd to get kind hot.. so i popped a 40mhz cpu in there and it was much better. Charles MacCaps.com On Feb 18, 2014, at 11:36 PM, Scott Holder wrote: > Hey folks, > > Recently picked up a still-in-shrinkwrap MacClip Jr for my Quadra 840AV I've > been reviving. Basically it's a little clip that fits over the top of the > clock chip for easy overclocking, plus a better heat sink and fan for the > processor. > > The problem I'm running into is it seems to have come with the wrong manual. > The manual is for a MacClip/PowerClip, which has 8 dip switches, while this > is a MacClip Jr with 4 dip switches. I've spent a lot of time playing with it > and the settings in the manual don't seem to correspond to the frequency I > end up with at all. Some Googling led me to a page that said I should use the > four left switches in the manual, but that doesn't seem to be correct either. > > Does anyone have the correct manual for the MacClip Jr lying around and can > give me a picture of the frequencies page? I've managed to get it to 45mhz > through trial and error but I'd rather have the correct settings. > > Thanks! > > Scott > > -- > -- > ----- > You received this message because you are a member of the Vintage Macs group. > The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our > netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml > To post to this group, send email to vintage-macs@googlegroups.com > To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/vintage-macs > > Support for older Macs: http://lowendmac.com/services/ > --- You received this message because you are subscribed to the Google Groups > "Vintage Macs" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to vintage-macs+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
