I tried a dell 15 inch and a 17 inch, the 15 inch had a V shaped base and it would just blackscreen and present nag message about mode not supported, the 17 inch (which I still have) has that oval base with the middle cut out, it would just blink
no doubt there are a gazillion models of dell monitors, but those are the 2 I tried with no luck On Wednesday, April 8, 2015 at 5:40:36 PM UTC-5, Doug Kiekow wrote: > > FWIW I use Dell 15” LCDs on a variety of vintage macs. Mostly thru the > switched connectors, but on IIsi’s the non switched 640x480 works best. If > you need to make your own the Knowledge Base article "Macintosh Monitor > Sense Codes: Technical Description” describes the sense pins, and how > they need to be connected. > > -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
