It's not about the size of the monitor, it's about resolution. Many macs can support different resolution, from 640 x 480 up. I do not have any more of this data handy unfortunately. You need to, iirc, short certain pins together for it to boot into a certain resolution. There should be a diagram or data somewhere. I routinely used to make these, in the mid 90s, to support single resolution fixed frequency monitors that I would find on the surplus market and sell them to Mac users. I still have a couple HP/Sony units tucked away. Don't just start experimenting. You need to either buy a dongle or a cable (that has the pins already configured). I have a few Sony dongles in storage, but on one side they plug into a 15 pin Apple card/connector, a VGA cable on the other side. Probably not what the op is looking for.
-- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.