On 3/2/2016 2:20 PM, Dylan McDermond wrote:
On Mar 2, 2016, at 11:15 AM, Stephen Collins<stephen.e.coll...@gmail.com>
wrote:
Can you help me choose the correct replacement caps? I assume Aluminum 47uf,
16V, Surface Mount. What else should I specify? Size? I am looking on
digikey.com.
Here is what I’ve used for the Classic logic board:
47uf/16v:
https://www.digikey.com/product-detail/en/panasonic-electronic-components/EEE-1CA470SP/PCE3889CT-ND/766265
1uf/50v:
https://www.digikey.com/product-detail/en/panasonic-electronic-components/EEE-HB1H1R0AR/PCE4760CT-ND/1718183
- Dylan
D, have you ever experimented with using non-SMD replacements? I think
that's how I'd try to go as I've found SMD can caps to be unreliable and
very short lived compared to leaded types.
- J.
--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com
To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to vintage-macs+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
