> Hi, I just recently purchased my first Mac, a Performa 630CD (AKA Quadra 630) 
> for the princely sum of 53 dollars. I've done a fair bit of research into 
> vintage Macs before I bought one but there's still some questions I haven't 
> found answers to.

Congratulations on catching the bug!

> 1. I haven't opened my Performa up yet, but chances are it still has the 
> original 68LC040 and I didn't get lucky by buying one with a proper 040 
> upgrade. I've found decently priced 040 chips on eBay but they're all 25MHz 
> chips, which would be slower than the 33MHz LC that's (probably) already in 
> there. Would a 25MHz 040 installed in a motherboard with a 33MHz clock 
> crystal run at 33MHz or is 25MHz the maximum speed it's capable of?

It is likely the 25 MHz 040 will run at 33 MHz, but there is no assurance it 
will.

> 2. I've heard the SCSI controller in the 630 is absolutely abominable due to 
> being slow and outdated. Can it be replaced with a more modern controller 
> from another Macintosh?

The SCSI controller is directly soldered onto the motherboard, so unless there 
is a pin for pin hardware and software compatible replacement AND you are 
mighty handy with a soldering iron (or have access to reflow equipment) there 
is no upgrading it.  I do believe, however, that the 630 uses an IDE hard 
drive…  SCSI being used for the CD-ROM and external expansion.

Good luck!

-- 
-- 
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our 
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To leave this group, send email to [email protected]
For more options, visit this group at 
http://groups.google.com/group/vintage-macs

Support for older Macs: http://lowendmac.com/services/
--- 
You received this message because you are subscribed to the Google Groups 
"Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to