> On 21 Dec, 2018, at 9:27 pm, Jeff Walther <[email protected]> wrote: > > In order to do it right, you must get an adapter which includes a provision > to terminate the upper data byte. If you do not, then the upper data byte > on the drive connector will not be terminated and while this often does not > cause problems, it is not correct SCSI configuration.
Another small wrinkle is that "wide" SCSI supports IDs 0-15, while "narrow" SCSI only has 0-7 (of which 7 is normally reserved for the controller). You'll need to make sure a "wide" drive is set to a low ID that the Mac can physically access. - Jonathan Morton -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
