>Robert Gray wrote: >>I have a SuperMac Spectrum/24 PDQ Plus v1.60 which is >>>supposed to give me 24-bit color to past the 1024x768. I installed the >>MultiScan software from Apple and I selected the 17" Multiscan from the >>list. However from the Control Strip the only option is 640x480.
I'm using a SuperMac card Spectrum/24 series III, v 1.1 in my IIci. It is controlled by a SuperVideo 2.7.4 cp which give the option for 1024x768. I originally had it running a huge NEC 7FG 17" multisync. You just need the cp. >1. Can it be that this very SuperMac card only accepts a 3x BNC SuperMac >monitor? If so, I can supply homebrew cable details, I think. My SuperMac >card, a Spectrum 8 series II from 1988, only wants 3x BNC. I don't know the >use sense pinnings off-hand. I use a "standard" connector and not a BNC type and no problems. -- dan_A -- Vintage Macs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> Vintage Macs list info: <http://lowendmac.com/lists/vintagemacs.shtml> The FAQ: <http://macfaq.org/> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/vintage.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------