Tuna,
Thanks for the suggestion. We have a friend who owns a glass company. We'll
borrow one of those suction things. I can't imagine how we'd get
underneath, this place is way up on top on the back. Right where it starts
to flatten out. It's on the curved part though. Hopefully this thing the
glass people have will work.
No, it hasn't been a good weekend. I love the a/s stream kind of like Merry
loves hers. It's a kind of sickness! I know we'll have a lot more problems
and I'm willing to work thru them, but it gets overwhelming. Especially
listening to you guys talk about all the problems. I'm the do it yourself
in this family. My husband works long hours and would rather pay to fix
something than to do it himself. I usually try to handle anything I'm big
enough to. I don't mind the hard work. We've looked at newer a/s and my
husband would rather by a newer one, but I think to learn, we'd better stick
to what we have. On the way home e spotted a 93 Excella 1000, that was just
brand new. They were asking $19,000. We drooled all the way home. Then
when we got here and I went inside ours, it just grabbed my heart again and
I saw I couldn't get rid of it although it's turning into a money pit. I
really feel it's just what we need right now. Maybe we could upgrade
someday or maybe not!
DSK in TEXAS
-----Original Message-----
From: Robert C Townsend <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Monday, June 12, 2000 2:46 AM
Subject: Re: [VAC] Popping out small dent in a/s
>this is not your weekend, is it? I've had reasonable success popping out a
>couple of small dents from my overlander with a smaller suction cup device
>with a handle/grip... the kind glaziers use to handle large sheets of
>glass... the alternative is to remove the corresponding inside skin of the
>trailer and pushing it out from the inside... body/fender people use the
>'spoon' technique... a curved surface like the back of a large salad spoon,
>and a 'rolling' motion. good luck!
>
>Tuna.
>
>----- Original Message -----
>From: Dana Kelley <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Sunday, June 11, 2000 1:41 PM
>Subject: [VAC] Popping out small dent in a/s
>
>
>> Well, my son being helpful and getting on top of a/s to work on the air
>> cond. He stepped off roof of the house and on to the a/s. He made a
small
>> dent where he put his foot. We tried popping it back out with a plunger
>> with no avail. I was sick! I wasn't out there when he did it. I
certainly
>> would not have allowed this. Any suggestions on how we can pop this back
>> out?
>> DSK (sick) in TEXAS
>>
>>
>>
>> K (sick) in TEXAS
>>
>>
>
>
