Hi Mari, Each router's different and I just bought another brand a year ago but from memory, there is a small recessed button near the power jack that you can push (sometimes you need a paper clicp or stylus or similar) which when held for 10 seconds or so resets the router to defaults.
Then take your favorite browser and go to http://192.168.1.1 And browse through the router screens like any other web page, you can't miss the wireless setup. Channel selection is your choice and the "other devices" you mention should handle the switch after you reboot them. The choice of frequency is up to you and it depends on what's in your area. Jon -----Original Message----- From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf Of Mari Sent: Sunday, August 19, 2012 11:12 PM To: viphone@googlegroups.com Subject: Re: Wireless connection issues. I wanted to know the following related to my issue: 1. How do you change the "channel" for the Lynksis router? 2. What channel should it be changed to? What affect will this have on any computer's connected to this router? 3. I think we forgot the password that we might have used before how do we reset the router back to defualt password? 4. Is there a specific webpage we need to go to for the Lynksis router to acomplish all this? Seeing as I am not very technical savy but can learn with percise instructions (very detailed) I would like to fix this issue Thanks Marissa On Sunday, August 19, 2012 9:23:27 PM UTC-7, Mari wrote: I have the Iphone 4 and 4s, in addition I have a home wireless network that is unsecure. My router is a Lynksis wrt54G2 after updating the Iphone 4 to IOS 5 i noticed that the wireless connection would just drop with out sudden warning, I had never had that happen before. I have been back and forth with Apple and ATT who both say its not the device, the iphone 4 is two years old and I recently upgraded to the 4s I noticed the same issue the iphone 4s could not keep an active connection the router... Now, I do have a few computers / laptop connected just fine to the router. Could it be that since the firmware is not up to date on the router that could be the issue, or could it be the router itself as maybe some security settings are not the "newest" or settings need to changed to work better with Iphone's? I really need help as I use my Iphone constantly and would like to be able to run off wifi. -- --