Hi DRC, Ok, thanks for the clarification on '$useVGL = 1'.
Is there any way that you could try running the Tecplot batch job on the 3D > X server without VirtualGL? If it fails in the same way, then it isn't our > bug. Do you mean on a local attached display? That won't be easy, since this graphics workstation is part of a cluster located far away from me or the user getting this bug. I have just contacted Tecplot Support and I'm waiting for their response and a trial license to test myself using my own environment. I remember to have to preload libvglfaker.so for starccm+ to work properly. Anything similar perhaps needed here for tec360? Just some more guessing. Worth a try? Thanks, Richard On Tue, 22 Mar 2022 at 13:58, 'DRC' via VirtualGL User Discussion/Support < [email protected]> wrote: > I tried it with '$useVGL = 1' as well and was still unable to reproduce > the issue. (Note that, from the point of view of the application, setting > '$useVGL = 1' in turbovncserver.conf or starting the TurboVNC session with > '-vgl' is the same as launching the application with 'vglrun +wm'.) > > I also tried with both CentOS 7.9 and CentOS Stream 8. My CentOS 7.9 > machine has a Quadro K5000 with driver v470.xx. My CentOS 8 machine has a > Quadro P620 with driver v510.xx. > > Is there any way that you could try running the Tecplot batch job on the > 3D X server without VirtualGL? If it fails in the same way, then it isn't > our bug. > > DRC > On 3/22/22 11:01 AM, Richard Ems wrote: > > Hi DRC, > > sorry, I forgot to comment out that module command, that would only add > the Tecplot installation PATH to the bash PATH variable, > But as I see from your output the tec360 command in Tec360_FlowViz_batch.sh > started fine, so it is already in your PATH, so all good. > > Did that tec360 run end without errors? > Is your setup also using $useVGL = 1; in /etc/turbovncserver.conf ? > Just guessing possible differences. > > Thanks for testing, > Richard > > > > On Tue, 22 Mar 2022 at 11:37, 'DRC' via VirtualGL User Discussion/Support < > [email protected]> wrote: > >> Please clarify how this is supposed to work. 'module load' is not a >> valid Bash command. >> >> ========== >> >> > vglrun ./Tec360_FlowViz_batch.sh >> ./Tec360_FlowViz_batch.sh: line 3: module: command not found >> Tecplot 2021.2.1.9698 - 21:07:35 Feb 3 2022 [linux64-centos6.10] >> Color maps directory : /usr/local/tecplot/360ex_2021r2/colormaps >> Configuration File : /usr/local/tecplot/360ex_2021r2/tecplot.cfg >> Process Temp Dir : /usr/tmp/tecplot_drc/tpaqmYUE0 >> Tecplot internal font file: /usr/local/tecplot/360ex_2021r2/tecplot.fnt >> LaTeX Configuration File: >> /usr/local/tecplot/360ex_2021r2/tecplot_latex.mcr >> Your license expires at the end of 26-Mar-2022. >> Update your license, or contact [email protected] for help. >> Tecplot executable : /usr/local/tecplot/360ex_2021r2/bin/tec360-bin >> Tecplot Home Directory : /usr/local/tecplot/360ex_2021r2 >> QuickMacro File : /usr/local/tecplot/360ex_2021r2/tecplot.mcr >> Addon Startup File : /usr/local/tecplot/360ex_2021r2/tecplot.add >> AddOn Loaded : Tecplot Subzone Data Loader >> AddOn Loaded : SZL Remote Loader >> AddOn Loaded : CFD Analyzer >> AddOn Loaded : CGNS Loader >> AddOn Loaded : DEM Loader >> AddOn Loaded : DXF Loader >> AddOn Loaded : EnSight Loader >> AddOn Loaded : FLOW-3D Loader >> AddOn Loaded : Fluent Common Fluid Files Loader >> AddOn Loaded : Fluent Data Loader >> AddOn Loaded : General Text Loader >> AddOn Loaded : HDF Loader >> AddOn Loaded : PLOT3D Loader >> AddOn Loaded : PLY Polygon File Loader >> AddOn Loaded : Text Spreadsheet Loader >> AddOn Loaded : Kiva Loader >> AddOn Loaded : Finite Element Analysis Loader >> AddOn Loaded : Write Data as Text >> AddOn Loaded : VTK Data Loader >> AddOn Loaded : FVCOM netCDF Loader >> AddOn Loaded : CONVERGE HDF5 File Loader >> AddOn Loaded : CONVERGE Output File Loader >> AddOn Loaded : Exodus File Loader >> AddOn Loaded : Telemac Data Loader >> AddOn Loaded : HDF5 Loader >> AddOn Loaded : Akima Spline >> AddOn Loaded : General Curve Fit >> AddOn Loaded : Stineman Interpolation >> AddOn Loaded : extendmcr >> AddOn Loaded : Advanced Quick Edit Tool >> AddOn Loaded : Multi Frame Manager >> AddOn Loaded : Create Multiple Frames >> AddOn Loaded : Tensor Eigensystem >> AddOn Loaded : Key Frame Animation >> AddOn Loaded : Aux Data Editor >> AddOn Loaded : Time Series Plot >> AddOn Loaded : Extract Blanked Zone >> AddOn Loaded : Extract Precise Line >> AddOn Loaded : Extract Over Time >> AddOn Loaded : Link Solution Time >> AddOn Loaded : Extend Time MCR >> AddOn Loaded : Strand Editor >> AddOn Loaded : Measure Distance >> >> ========== >> >> DRC >> On 3/21/22 4:25 PM, Richard Ems wrote: >> >> Hi DRC, >> >> find attached an example using Tecplot's Onera example model. >> >> Thanks, >> Richard >> >> >> On Mon, 21 Mar 2022 at 15:28, 'DRC' via VirtualGL User Discussion/Support >> <[email protected]> wrote: >> >>> I have installed Tecplot 360 with an evaluation license. Please specify >>> the exact steps needed to reproduce the issue using one of the Tecplot >>> examples. >>> >>> DRC >>> On 3/21/22 7:54 AM, Richard Ems wrote: >>> >>> Hi DRC, hi all, >>> >>> First, thanks DRC for this great software! >>> >>> We are having some issue with Tecplot / tec360 and VirtualGL: >>> Some system specs: >>> Rocky Linux 8.5 >>> VirtualGL-3.0-20211119.x86_64 >>> turbovnc-2.2.90-20211222.x86_64 >>> NVIDIA Corporation GM204GL [Tesla M60] >>> Tecplot 360 EX 2021 R2, Version 2021.2.1.9698 (Feb 3 2022) >>> >>> VirtualGL is configured with both GLX + EGL back ends. >>> $useVGL = 1; in /etc/turbovncserver.conf >>> >>> While trying to run tec360 on batch mode we get the attached error >>> output. >>> Here the last 10 lines: >>> >>> /net/c1m1/data_1/opt/Tecplot360/360ex_2021r2/bin/../bin/libtpsdkbase.so(TecEngStartup+0x24) >>> [0x7f93fdad0394] >>> /net/c1m1/data_1/opt/Tecplot360/360ex_2021r2/bin/../bin/libtpsdkintegrationmanager.so(_ZN7tecplot3sdk11integration15ManagerAbstract5startEv+0x19) >>> [0x7f93fe92b1b9] >>> /net/c1m1/data_1/opt/Tecplot360/360ex_2021r2/bin/tec360-bin() [0x487ef5] >>> /lib64/libc.so.6(__libc_start_main+0xf3) [0x7f93fb4c0493] >>> /net/c1m1/data_1/opt/Tecplot360/360ex_2021r2/bin/tec360-bin() [0x489d09] >>> >>> Tecplot received shutdown signal. >>> Signal #11 >>> Please send the output above to Tecplot support: [email protected] >>> /net/c1m1/data_1/opt/Tecplot360/360ex_2021r2/bin/tec360: line 349: >>> 276303 Aborted (core dumped) "$0-bin" "$@" >>> >>> >>> >>> Any ideas what is going wrong? >>> When running with tec360 option "--osmesa" all runs fine, but it takes >>> 17 min to run. >>> >>> --osmesa >>> Bypass the OpenGL library and use the LLVM OSMesa library for >>> off-screen >>> image rendering. This option does not require an X server connection. >>> >>> >>> Best regards, >>> Richard >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "VirtualGL User Discussion/Support" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/virtualgl-users/c52cd569-4ff3-4bef-ad59-dc83a2938b97n%40googlegroups.com >>> <https://groups.google.com/d/msgid/virtualgl-users/c52cd569-4ff3-4bef-ad59-dc83a2938b97n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "VirtualGL User Discussion/Support" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/virtualgl-users/d9d33270-0115-79e9-2694-5dc358d4f3e5%40virtualgl.org >>> <https://groups.google.com/d/msgid/virtualgl-users/d9d33270-0115-79e9-2694-5dc358d4f3e5%40virtualgl.org?utm_medium=email&utm_source=footer> >>> . >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "VirtualGL User Discussion/Support" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/virtualgl-users/CAEqczzz-YhSLWHB2sSHHruJva_D_LvmOL6EPCVV%3DCwkcmrU6pQ%40mail.gmail.com >> <https://groups.google.com/d/msgid/virtualgl-users/CAEqczzz-YhSLWHB2sSHHruJva_D_LvmOL6EPCVV%3DCwkcmrU6pQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "VirtualGL User Discussion/Support" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/virtualgl-users/e3b796a1-f680-4c3e-26d9-b1f7fc410664%40virtualgl.org >> <https://groups.google.com/d/msgid/virtualgl-users/e3b796a1-f680-4c3e-26d9-b1f7fc410664%40virtualgl.org?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups > "VirtualGL User Discussion/Support" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/virtualgl-users/CAEqczzw1c3MNUZT%2BV%2Be%2Bd3RzuJuXHYSrW1bCWCyBqKsEwxaQUA%40mail.gmail.com > <https://groups.google.com/d/msgid/virtualgl-users/CAEqczzw1c3MNUZT%2BV%2Be%2Bd3RzuJuXHYSrW1bCWCyBqKsEwxaQUA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "VirtualGL User Discussion/Support" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/virtualgl-users/0aa7f795-a393-0eea-c045-3c0ad5af4995%40virtualgl.org > <https://groups.google.com/d/msgid/virtualgl-users/0aa7f795-a393-0eea-c045-3c0ad5af4995%40virtualgl.org?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "VirtualGL User Discussion/Support" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/virtualgl-users/CAEqczzzf5QZ%3Dq-tp3QyxMurbh5RV_JGbkuWfo1LF1zD19%3DVwSg%40mail.gmail.com.
