Rusty Russell a écrit :
> Various drivers do skb_orphan() because they do not free transmitted
> skbs in a timely manner (causing apps which hit their socket limits to
> stall, socket close to hang, etc.).
> 
> DaveM points out that there are advantages to doing it generally (it's
> more likely to be on same CPU than after xmit), and I couldn't find
> any new starvation issues in simple benchmarking here.
> 
>

If really no starvations are possible at all, I really wonder why some
guys added memory accounting to UDP flows. Maybe they dont run "simple
benchmarks" but real apps ? :)

For TCP, I agree your patch is a huge benefit, since its paced by remote ACKS
and window control, but an UDP sender will likely be able to saturate a link.

Maybe we can try to selectively call skb_orphan() only for tcp packets ?

I understand your motivations are the driver simplifications, so you
want all packets being orphaned... hmm...

 This patch adds skb_orphan to the start of dev_hard_start_xmit(): it
> can be premature in the NETDEV_TX_BUSY case, but that's uncommon.
> 
> I removed the drivers' skb_orphan(), though it's harmless.
> 
> Signed-off-by: Rusty Russell <ru...@rustcorp.com.au>
> Cc: Divy Le Ray <d...@chelsio.com>
> Cc: Roland Dreier <rola...@cisco.com>
> Cc: Pavel Emelianov <xe...@openvz.org>
> Cc: Dan Williams <d...@redhat.com>
> Cc: libertas-...@lists.infradead.org
> ---
>  drivers/net/cxgb3/sge.c            |   27 ---------------------------
>  drivers/net/loopback.c             |    2 --
>  drivers/net/mlx4/en_tx.c           |    4 ----
>  drivers/net/niu.c                  |    3 +--
>  drivers/net/veth.c                 |    2 --
>  drivers/net/wireless/libertas/tx.c |    3 ---
>  net/core/dev.c                     |   21 +++++----------------
>  7 files changed, 6 insertions(+), 56 deletions(-)
> 
> diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
> --- a/drivers/net/cxgb3/sge.c
> +++ b/drivers/net/cxgb3/sge.c
> @@ -1288,33 +1288,6 @@ int t3_eth_xmit(struct sk_buff *skb, str
>       dev->trans_start = jiffies;
>       spin_unlock(&q->lock);
>  
> -     /*
> -      * We do not use Tx completion interrupts to free DMAd Tx packets.
> -      * This is good for performamce but means that we rely on new Tx
> -      * packets arriving to run the destructors of completed packets,
> -      * which open up space in their sockets' send queues.  Sometimes
> -      * we do not get such new packets causing Tx to stall.  A single
> -      * UDP transmitter is a good example of this situation.  We have
> -      * a clean up timer that periodically reclaims completed packets
> -      * but it doesn't run often enough (nor do we want it to) to prevent
> -      * lengthy stalls.  A solution to this problem is to run the
> -      * destructor early, after the packet is queued but before it's DMAd.
> -      * A cons is that we lie to socket memory accounting, but the amount
> -      * of extra memory is reasonable (limited by the number of Tx
> -      * descriptors), the packets do actually get freed quickly by new
> -      * packets almost always, and for protocols like TCP that wait for
> -      * acks to really free up the data the extra memory is even less.
> -      * On the positive side we run the destructors on the sending CPU
> -      * rather than on a potentially different completing CPU, usually a
> -      * good thing.  We also run them without holding our Tx queue lock,
> -      * unlike what reclaim_completed_tx() would otherwise do.
> -      *
> -      * Run the destructor before telling the DMA engine about the packet
> -      * to make sure it doesn't complete and get freed prematurely.
> -      */
> -     if (likely(!skb_shared(skb)))
> -             skb_orphan(skb);
> -
>       write_tx_pkt_wr(adap, skb, pi, pidx, gen, q, ndesc, compl);
>       check_ring_tx_db(adap, q);
>       return NETDEV_TX_OK;
> diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
> --- a/drivers/net/loopback.c
> +++ b/drivers/net/loopback.c
> @@ -72,8 +72,6 @@ static int loopback_xmit(struct sk_buff 
>  {
>       struct pcpu_lstats *pcpu_lstats, *lb_stats;
>  
> -     skb_orphan(skb);
> -
>       skb->protocol = eth_type_trans(skb,dev);
>  
>       /* it's OK to use per_cpu_ptr() because BHs are off */
> diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
> --- a/drivers/net/mlx4/en_tx.c
> +++ b/drivers/net/mlx4/en_tx.c
> @@ -807,10 +807,6 @@ int mlx4_en_xmit(struct sk_buff *skb, st
>       if (tx_desc == (struct mlx4_en_tx_desc *) ring->bounce_buf)
>               tx_desc = mlx4_en_bounce_to_desc(priv, ring, index, desc_size);
>  
> -     /* Run destructor before passing skb to HW */
> -     if (likely(!skb_shared(skb)))
> -             skb_orphan(skb);
> -
>       /* Ensure new descirptor hits memory
>        * before setting ownership of this descriptor to HW */
>       wmb();
> diff --git a/drivers/net/niu.c b/drivers/net/niu.c
> --- a/drivers/net/niu.c
> +++ b/drivers/net/niu.c
> @@ -6667,8 +6667,7 @@ static int niu_start_xmit(struct sk_buff
>               }
>               kfree_skb(skb);
>               skb = skb_new;
> -     } else
> -             skb_orphan(skb);
> +     }
>  
>       align = ((unsigned long) skb->data & (16 - 1));
>       headroom = align + sizeof(struct tx_pkt_hdr);
> diff --git a/drivers/net/veth.c b/drivers/net/veth.c
> --- a/drivers/net/veth.c
> +++ b/drivers/net/veth.c
> @@ -155,8 +155,6 @@ static int veth_xmit(struct sk_buff *skb
>       struct veth_net_stats *stats, *rcv_stats;
>       int length, cpu;
>  
> -     skb_orphan(skb);
> -
>       priv = netdev_priv(dev);
>       rcv = priv->peer;
>       rcv_priv = netdev_priv(rcv);
> diff --git a/drivers/net/wireless/libertas/tx.c 
> b/drivers/net/wireless/libertas/tx.c
> --- a/drivers/net/wireless/libertas/tx.c
> +++ b/drivers/net/wireless/libertas/tx.c
> @@ -154,9 +154,6 @@ int lbs_hard_start_xmit(struct sk_buff *
>       if (priv->monitormode) {
>               /* Keep the skb to echo it back once Tx feedback is
>                  received from FW */
> -             skb_orphan(skb);
> -
> -             /* Keep the skb around for when we get feedback */
>               priv->currenttxskb = skb;
>       } else {
>   free:
> diff --git a/net/core/dev.c b/net/core/dev.c
> --- a/net/core/dev.c
> +++ b/net/core/dev.c
> @@ -1677,6 +1677,10 @@ int dev_hard_start_xmit(struct sk_buff *
>       const struct net_device_ops *ops = dev->netdev_ops;
>       int rc;
>  
> +     /* Call destructor here.  It's SMP-cache-friendly and avoids issues
> +      * with drivers which can hold transmitted skbs for long times */
> +     skb_orphan(skb);
> +
>       if (likely(!skb->next)) {
>               if (!list_empty(&ptype_all))
>                       dev_queue_xmit_nit(skb, dev);
> @@ -1688,22 +1692,7 @@ int dev_hard_start_xmit(struct sk_buff *
>                               goto gso;
>               }
>  
> -             rc = ops->ndo_start_xmit(skb, dev);
> -             /*
> -              * TODO: if skb_orphan() was called by
> -              * dev->hard_start_xmit() (for example, the unmodified
> -              * igb driver does that; bnx2 doesn't), then
> -              * skb_tx_software_timestamp() will be unable to send
> -              * back the time stamp.
> -              *
> -              * How can this be prevented? Always create another
> -              * reference to the socket before calling
> -              * dev->hard_start_xmit()? Prevent that skb_orphan()
> -              * does anything in dev->hard_start_xmit() by clearing
> -              * the skb destructor before the call and restoring it
> -              * afterwards, then doing the skb_orphan() ourselves?
> -              */
> -             return rc;
> +             return ops->ndo_start_xmit(skb, dev);
>       }
>  
>  gso:
> 
> 

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/virtualization

Reply via email to