Wed, Apr 11, 2018 at 09:13:52PM CEST, sridhar.samudr...@intel.com wrote:
>On 4/11/2018 8:51 AM, Jiri Pirko wrote:
>> Tue, Apr 10, 2018 at 08:59:48PM CEST, sridhar.samudr...@intel.com wrote:
>> > This provides a generic interface for paravirtual drivers to listen
>> > for netdev register/unregister/link change events from pci ethernet
>> > devices with the same MAC and takeover their datapath. The notifier and
>> > event handling code is based on the existing netvsc implementation.
>> >
>> > It exposes 2 sets of interfaces to the paravirtual drivers.
>> > 1. existing netvsc driver that uses 2 netdev model. In this model, no
>> > master netdev is created. The paravirtual driver registers each bypass
>> > instance along with a set of ops to manage the slave events.
>> > bypass_master_register()
>> > bypass_master_unregister()
>> > 2. new virtio_net based solution that uses 3 netdev model. In this model,
>> > the bypass module provides interfaces to create/destroy additional master
>> > netdev and all the slave events are managed internally.
>> > bypass_master_create()
>> > bypass_master_destroy()
>> >
>> > Signed-off-by: Sridhar Samudrala <sridhar.samudr...@intel.com>
>> > ---
>> > include/linux/netdevice.h | 14 +
>> > include/net/bypass.h | 96 ++++++
>> > net/Kconfig | 18 +
>> > net/core/Makefile | 1 +
>> > net/core/bypass.c | 844
>> > ++++++++++++++++++++++++++++++++++++++++++++++
>> > 5 files changed, 973 insertions(+)
>> > create mode 100644 include/net/bypass.h
>> > create mode 100644 net/core/bypass.c
>> >
>> > diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
>> > index cf44503ea81a..587293728f70 100644
>> > --- a/include/linux/netdevice.h
>> > +++ b/include/linux/netdevice.h
>> > @@ -1430,6 +1430,8 @@ enum netdev_priv_flags {
>> > IFF_PHONY_HEADROOM = 1<<24,
>> > IFF_MACSEC = 1<<25,
>> > IFF_NO_RX_HANDLER = 1<<26,
>> > + IFF_BYPASS = 1 << 27,
>> > + IFF_BYPASS_SLAVE = 1 << 28,
>> I wonder, why you don't follow the existing coding style... Also, please
>> add these to into the comment above.
>
>To avoid checkpatch warnings. If it is OK to ignore these warnings, I can
>switch back
>to the existing coding style to be consistent.
Please do.
>
>>
>>
>> > };
>> >
>> > #define IFF_802_1Q_VLAN IFF_802_1Q_VLAN
>> > @@ -1458,6 +1460,8 @@ enum netdev_priv_flags {
>> > #define IFF_RXFH_CONFIGURED IFF_RXFH_CONFIGURED
>> > #define IFF_MACSEC IFF_MACSEC
>> > #define IFF_NO_RX_HANDLER IFF_NO_RX_HANDLER
>> > +#define IFF_BYPASS IFF_BYPASS
>> > +#define IFF_BYPASS_SLAVE IFF_BYPASS_SLAVE
>> >
>> > /**
>> > * struct net_device - The DEVICE structure.
>> > @@ -4308,6 +4312,16 @@ static inline bool netif_is_rxfh_configured(const
>> > struct net_device *dev)
>> > return dev->priv_flags & IFF_RXFH_CONFIGURED;
>> > }
>> >
>> > +static inline bool netif_is_bypass_master(const struct net_device *dev)
>> > +{
>> > + return dev->priv_flags & IFF_BYPASS;
>> > +}
>> > +
>> > +static inline bool netif_is_bypass_slave(const struct net_device *dev)
>> > +{
>> > + return dev->priv_flags & IFF_BYPASS_SLAVE;
>> > +}
>> > +
>> > /* This device needs to keep skb dst for qdisc enqueue or ndo_start_xmit()
>> > */
>> > static inline void netif_keep_dst(struct net_device *dev)
>> > {
>> > diff --git a/include/net/bypass.h b/include/net/bypass.h
>> > new file mode 100644
>> > index 000000000000..86b02cb894cf
>> > --- /dev/null
>> > +++ b/include/net/bypass.h
>> > @@ -0,0 +1,96 @@
>> > +// SPDX-License-Identifier: GPL-2.0
>> > +/* Copyright (c) 2018, Intel Corporation. */
>> > +
>> > +#ifndef _NET_BYPASS_H
>> > +#define _NET_BYPASS_H
>> > +
>> > +#include <linux/netdevice.h>
>> > +
>> > +struct bypass_ops {
>> > + int (*slave_pre_register)(struct net_device *slave_netdev,
>> > + struct net_device *bypass_netdev);
>> > + int (*slave_join)(struct net_device *slave_netdev,
>> > + struct net_device *bypass_netdev);
>> > + int (*slave_pre_unregister)(struct net_device *slave_netdev,
>> > + struct net_device *bypass_netdev);
>> > + int (*slave_release)(struct net_device *slave_netdev,
>> > + struct net_device *bypass_netdev);
>> > + int (*slave_link_change)(struct net_device *slave_netdev,
>> > + struct net_device *bypass_netdev);
>> > + rx_handler_result_t (*handle_frame)(struct sk_buff **pskb);
>> > +};
>> > +
>> > +struct bypass_master {
>> > + struct list_head list;
>> > + struct net_device __rcu *bypass_netdev;
>> > + struct bypass_ops __rcu *ops;
>> > +};
>> > +
>> > +/* bypass state */
>> > +struct bypass_info {
>> > + /* passthru netdev with same MAC */
>> > + struct net_device __rcu *active_netdev;
>> You still use "active"/"backup" names which is highly misleading as
>> it has completely different meaning that in bond for example.
>> I noted that in my previous review already. Please change it.
>
>I guess the issue is with only the 'active' name. 'backup' should be fine as
>it also
>matches with the BACKUP feature bit we are adding to virtio_net.
I think that "backup" is also misleading. Both "active" and "backup"
mean a *state* of slaves. This should be named differently.
>
>With regards to alternate names for 'active', you suggested 'stolen', but i
>am not too happy with it.
>netvsc uses vf_netdev, are you OK with this? Or another option is 'passthru'
No. The netdev could be any netdevice. It does not have to be a "VF".
I think "stolen" is quite appropriate since it describes the modus
operandi. The bypass master steals some netdevice according to some
match.
But I don't insist on "stolen". Just sounds right.
>
>
>
>>
>>
>> > +
>> > + /* virtio_net netdev */
>> > + struct net_device __rcu *backup_netdev;
>> > +
>> > + /* active netdev stats */
>> > + struct rtnl_link_stats64 active_stats;
>> > +
>> > + /* backup netdev stats */
>> > + struct rtnl_link_stats64 backup_stats;
>> > +
>> > + /* aggregated stats */
>> > + struct rtnl_link_stats64 bypass_stats;
>> > +
>> > + /* spinlock while updating stats */
>> > + spinlock_t stats_lock;
>> > +};
>> > +
>> > +#if IS_ENABLED(CONFIG_NET_BYPASS)
>> > +
>> > +int bypass_master_create(struct net_device *backup_netdev,
>> > + struct bypass_master **pbypass_master);
>> > +void bypass_master_destroy(struct bypass_master *bypass_master);
>> > +
>> > +int bypass_master_register(struct net_device *dev, struct bypass_ops *ops,
>> > + struct bypass_master **pbypass_master);
>> > +void bypass_master_unregister(struct bypass_master *bypass_master);
>> > +
>> > +int bypass_slave_unregister(struct net_device *slave_netdev);
>> > +
>> > +#else
>> > +
>> > +static inline
>> > +int bypass_master_create(struct net_device *backup_netdev,
>> > + struct bypass_master **pbypass_master);
>> > +{
>> > + return 0;
>> > +}
>> > +
>> > +static inline
>> > +void bypass_master_destroy(struct bypass_master *bypass_master)
>> > +{
>> > +}
>> > +
>> > +static inline
>> > +int bypass_master_register(struct net_device *dev, struct bypass_ops *ops,
>> > + struct pbypass_master **pbypass_master);
>> > +{
>> > + return 0;
>> > +}
>> > +
>> > +static inline
>> > +void bypass_master_unregister(struct bypass_master *bypass_master)
>> > +{
>> > +}
>> > +
>> > +static inline
>> > +int bypass_slave_unregister(struct net_device *slave_netdev)
>> > +{
>> > + return 0;
>> > +}
>> > +
>> > +#endif
>> > +
>> > +#endif /* _NET_BYPASS_H */
>> > diff --git a/net/Kconfig b/net/Kconfig
>> > index 0428f12c25c2..994445f4a96a 100644
>> > --- a/net/Kconfig
>> > +++ b/net/Kconfig
>> > @@ -423,6 +423,24 @@ config MAY_USE_DEVLINK
>> > on MAY_USE_DEVLINK to ensure they do not cause link errors when
>> > devlink is a loadable module and the driver using it is built-in.
>> >
>> > +config NET_BYPASS
>> > + tristate "Bypass interface"
>> > + ---help---
>> > + This provides a generic interface for paravirtual drivers to listen
>> > + for netdev register/unregister/link change events from pci ethernet
>> > + devices with the same MAC and takeover their datapath. This also
>> > + enables live migration of a VM with direct attached VF by failing
>> > + over to the paravirtual datapath when the VF is unplugged.
>> > +
>> > +config MAY_USE_BYPASS
>> > + tristate
>> > + default m if NET_BYPASS=m
>> > + default y if NET_BYPASS=y || NET_BYPASS=n
>> > + help
>> > + Drivers using the bypass infrastructure should have a dependency
>> > + on MAY_USE_BYPASS to ensure they do not cause link errors when
>> > + bypass is a loadable module and the driver using it is built-in.
>> > +
>> > endif # if NET
>> >
>> > # Used by archs to tell that they support BPF JIT compiler plus which
>> > flavour.
>> > diff --git a/net/core/Makefile b/net/core/Makefile
>> > index 6dbbba8c57ae..a9727ed1c8fc 100644
>> > --- a/net/core/Makefile
>> > +++ b/net/core/Makefile
>> > @@ -30,3 +30,4 @@ obj-$(CONFIG_DST_CACHE) += dst_cache.o
>> > obj-$(CONFIG_HWBM) += hwbm.o
>> > obj-$(CONFIG_NET_DEVLINK) += devlink.o
>> > obj-$(CONFIG_GRO_CELLS) += gro_cells.o
>> > +obj-$(CONFIG_NET_BYPASS) += bypass.o
>> > diff --git a/net/core/bypass.c b/net/core/bypass.c
>> > new file mode 100644
>> > index 000000000000..b5b9cb554c3f
>> > --- /dev/null
>> > +++ b/net/core/bypass.c
>> > @@ -0,0 +1,844 @@
>> > +// SPDX-License-Identifier: GPL-2.0
>> > +/* Copyright (c) 2018, Intel Corporation. */
>> > +
>> > +/* A common module to handle registrations and notifications for
>> > paravirtual
>> > + * drivers to enable accelerated datapath and support VF live migration.
>> > + *
>> > + * The notifier and event handling code is based on netvsc driver.
>> > + */
>> > +
>> > +#include <linux/netdevice.h>
>> > +#include <linux/etherdevice.h>
>> > +#include <linux/ethtool.h>
>> > +#include <linux/module.h>
>> > +#include <linux/slab.h>
>> > +#include <linux/netdevice.h>
>> > +#include <linux/netpoll.h>
>> > +#include <linux/rtnetlink.h>
>> > +#include <linux/if_vlan.h>
>> > +#include <linux/pci.h>
>> > +#include <net/sch_generic.h>
>> > +#include <uapi/linux/if_arp.h>
>> > +#include <net/bypass.h>
>> > +
>> > +static LIST_HEAD(bypass_master_list);
>> > +static DEFINE_SPINLOCK(bypass_lock);
>> > +
>> > +static int bypass_slave_pre_register(struct net_device *slave_netdev,
>> > + struct net_device *bypass_netdev,
>> > + struct bypass_ops *bypass_ops)
>> > +{
>> > + struct bypass_info *bi;
>> > + bool backup;
>> > +
>> > + if (bypass_ops) {
>> > + if (!bypass_ops->slave_pre_register)
>> > + return -EINVAL;
>> > +
>> > + return bypass_ops->slave_pre_register(slave_netdev,
>> > + bypass_netdev);
>> > + }
>> > +
>> > + bi = netdev_priv(bypass_netdev);
>> > + backup = (slave_netdev->dev.parent == bypass_netdev->dev.parent);
>> > + if (backup ? rtnl_dereference(bi->backup_netdev) :
>> > + rtnl_dereference(bi->active_netdev)) {
>> > + netdev_err(bypass_netdev, "%s attempting to register as slave
>> > dev when %s already present\n",
>> > + slave_netdev->name, backup ? "backup" : "active");
>> > + return -EEXIST;
>> > + }
>> > +
>> > + /* Avoid non pci devices as active netdev */
>> > + if (!backup && (!slave_netdev->dev.parent ||
>> > + !dev_is_pci(slave_netdev->dev.parent)))
>> > + return -EINVAL;
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +static int bypass_slave_join(struct net_device *slave_netdev,
>> > + struct net_device *bypass_netdev,
>> > + struct bypass_ops *bypass_ops)
>> > +{
>> > + struct bypass_info *bi;
>> > + bool backup;
>> > +
>> > + if (bypass_ops) {
>> > + if (!bypass_ops->slave_join)
>> > + return -EINVAL;
>> > +
>> > + return bypass_ops->slave_join(slave_netdev, bypass_netdev);
>> > + }
>> > +
>> > + bi = netdev_priv(bypass_netdev);
>> > + backup = (slave_netdev->dev.parent == bypass_netdev->dev.parent);
>> > +
>> > + dev_hold(slave_netdev);
>> > +
>> > + if (backup) {
>> > + rcu_assign_pointer(bi->backup_netdev, slave_netdev);
>> > + dev_get_stats(bi->backup_netdev, &bi->backup_stats);
>> > + } else {
>> > + rcu_assign_pointer(bi->active_netdev, slave_netdev);
>> > + dev_get_stats(bi->active_netdev, &bi->active_stats);
>> > + bypass_netdev->min_mtu = slave_netdev->min_mtu;
>> > + bypass_netdev->max_mtu = slave_netdev->max_mtu;
>> > + }
>> > +
>> > + netdev_info(bypass_netdev, "bypass slave:%s joined\n",
>> > + slave_netdev->name);
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +/* Called when slave dev is injecting data into network stack.
>> > + * Change the associated network device from lower dev to virtio.
>> > + * note: already called with rcu_read_lock
>> > + */
>> > +static rx_handler_result_t bypass_handle_frame(struct sk_buff **pskb)
>> > +{
>> > + struct sk_buff *skb = *pskb;
>> > + struct net_device *ndev = rcu_dereference(skb->dev->rx_handler_data);
>> > +
>> > + skb->dev = ndev;
>> > +
>> > + return RX_HANDLER_ANOTHER;
>> > +}
>> > +
>> > +static struct net_device *bypass_master_get_bymac(u8 *mac,
>> > + struct bypass_ops **ops)
>> > +{
>> > + struct bypass_master *bypass_master;
>> > + struct net_device *bypass_netdev;
>> > +
>> > + spin_lock(&bypass_lock);
>> > + list_for_each_entry(bypass_master, &bypass_master_list, list) {
>> As I wrote the last time, you don't need this list, spinlock.
>> You can do just something like:
>> for_each_net(net) {
>> for_each_netdev(net, dev) {
>> if (netif_is_bypass_master(dev)) {
>
>This function returns the upper netdev as well as the ops associated
>with that netdev.
>bypass_master_list is a list of 'struct bypass_master' that associates
Well, can't you have it in netdev priv?
>'bypass_netdev' with 'bypass_ops' and gets added via bypass_master_register().
>We need 'ops' only to support the 2 netdev model of netvsc. ops will be
>NULL for 3-netdev model.
I see :(
>
>
>>
>>
>>
>>
>> > + bypass_netdev = rcu_dereference(bypass_master->bypass_netdev);
>> > + if (ether_addr_equal(bypass_netdev->perm_addr, mac)) {
>> > + *ops = rcu_dereference(bypass_master->ops);
>> I don't see how rcu_dereference is ok here.
>> 1) I don't see rcu_read_lock taken
>> 2) Looks like bypass_master->ops has the same value across the whole
>> existence.
>
>We hold rtnl_lock(), i think i need to change this to rtnl_dereference.
>Yes. ops doesn't change.
If it does not change, you can just access it directly.
>
>>
>>
>> > + spin_unlock(&bypass_lock);
>> > + return bypass_netdev;
>> > + }
>> > + }
>> > + spin_unlock(&bypass_lock);
>> > + return NULL;
>> > +}
>> > +
>> > +static int bypass_slave_register(struct net_device *slave_netdev)
>> > +{
>> > + struct net_device *bypass_netdev;
>> > + struct bypass_ops *bypass_ops;
>> > + int ret, orig_mtu;
>> > +
>> > + ASSERT_RTNL();
>> > +
>> > + bypass_netdev = bypass_master_get_bymac(slave_netdev->perm_addr,
>> > + &bypass_ops);
>> For master, could you use word "master" in the variables so it is clear?
>> Also, "dev" is fine instead of "netdev".
>> Something like "bpmaster_dev"
>
>bypass_master is of type struct bypass_master, bypass_netdev is of type
>struct net_device.
I was trying to point out, that "bypass_netdev" represents a "master"
netdev, yet it does not say master. That is why I suggested
"bpmaster_dev"
>I can change all _netdev suffixes to _dev to make the names shorter.
ok.
>
>
>>
>>
>> > + if (!bypass_netdev)
>> > + goto done;
>> > +
>> > + ret = bypass_slave_pre_register(slave_netdev, bypass_netdev,
>> > + bypass_ops);
>> > + if (ret != 0)
>> Just "if (ret)" will do. You have this on more places.
>
>OK.
>
>
>>
>>
>> > + goto done;
>> > +
>> > + ret = netdev_rx_handler_register(slave_netdev,
>> > + bypass_ops ? bypass_ops->handle_frame :
>> > + bypass_handle_frame, bypass_netdev);
>> > + if (ret != 0) {
>> > + netdev_err(slave_netdev, "can not register bypass rx handler
>> > (err = %d)\n",
>> > + ret);
>> > + goto done;
>> > + }
>> > +
>> > + ret = netdev_upper_dev_link(slave_netdev, bypass_netdev, NULL);
>> > + if (ret != 0) {
>> > + netdev_err(slave_netdev, "can not set master device %s (err =
>> > %d)\n",
>> > + bypass_netdev->name, ret);
>> > + goto upper_link_failed;
>> > + }
>> > +
>> > + slave_netdev->priv_flags |= IFF_BYPASS_SLAVE;
>> > +
>> > + if (netif_running(bypass_netdev)) {
>> > + ret = dev_open(slave_netdev);
>> > + if (ret && (ret != -EBUSY)) {
>> > + netdev_err(bypass_netdev, "Opening slave %s failed
>> > ret:%d\n",
>> > + slave_netdev->name, ret);
>> > + goto err_interface_up;
>> > + }
>> > + }
>> > +
>> > + /* Align MTU of slave with master */
>> > + orig_mtu = slave_netdev->mtu;
>> > + ret = dev_set_mtu(slave_netdev, bypass_netdev->mtu);
>> > + if (ret != 0) {
>> > + netdev_err(bypass_netdev, "unable to change mtu of %s to %u
>> > register failed\n",
>> > + slave_netdev->name, bypass_netdev->mtu);
>> > + goto err_set_mtu;
>> > + }
>> > +
>> > + ret = bypass_slave_join(slave_netdev, bypass_netdev, bypass_ops);
>> > + if (ret != 0)
>> > + goto err_join;
>> > +
>> > + call_netdevice_notifiers(NETDEV_JOIN, slave_netdev);
>> > +
>> > + netdev_info(bypass_netdev, "bypass slave:%s registered\n",
>> > + slave_netdev->name);
>> > +
>> > + goto done;
>> > +
>> > +err_join:
>> > + dev_set_mtu(slave_netdev, orig_mtu);
>> > +err_set_mtu:
>> > + dev_close(slave_netdev);
>> > +err_interface_up:
>> > + netdev_upper_dev_unlink(slave_netdev, bypass_netdev);
>> > + slave_netdev->priv_flags &= ~IFF_BYPASS_SLAVE;
>> > +upper_link_failed:
>> > + netdev_rx_handler_unregister(slave_netdev);
>> > +done:
>> > + return NOTIFY_DONE;
>> > +}
>> > +
>> > +static int bypass_slave_pre_unregister(struct net_device *slave_netdev,
>> > + struct net_device *bypass_netdev,
>> > + struct bypass_ops *bypass_ops)
>> > +{
>> > + struct net_device *backup_netdev, *active_netdev;
>> > + struct bypass_info *bi;
>> > +
>> > + if (bypass_ops) {
>> > + if (!bypass_ops->slave_pre_unregister)
>> > + return -EINVAL;
>> > +
>> > + return bypass_ops->slave_pre_unregister(slave_netdev,
>> > + bypass_netdev);
>> > + }
>> > +
>> > + bi = netdev_priv(bypass_netdev);
>> > + active_netdev = rtnl_dereference(bi->active_netdev);
>> > + backup_netdev = rtnl_dereference(bi->backup_netdev);
>> > +
>> > + if (slave_netdev != active_netdev && slave_netdev != backup_netdev)
>> > + return -EINVAL;
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +static int bypass_slave_release(struct net_device *slave_netdev,
>> > + struct net_device *bypass_netdev,
>> > + struct bypass_ops *bypass_ops)
>> > +{
>> > + struct net_device *backup_netdev, *active_netdev;
>> > + struct bypass_info *bi;
>> > +
>> > + if (bypass_ops) {
>> > + if (!bypass_ops->slave_release)
>> > + return -EINVAL;
>> I think it would be good to make the API to the driver more strict and
>> have a separate set of ops for "active" and "backup" netdevices.
>> That should stop people thinking about extending this to more slaves in
>> the future.
>
>We have checks in slave_pre_register() that allows only 1 'backup' and 1
>'active' slave.
I'm very well aware of that. I just thought that explicit ops for the
two slaves would make this more clear.
>
>
>>
>>
>>
>> > +
>> > + return bypass_ops->slave_release(slave_netdev, bypass_netdev);
>> > + }
>> > +
>> > + bi = netdev_priv(bypass_netdev);
>> > + active_netdev = rtnl_dereference(bi->active_netdev);
>> > + backup_netdev = rtnl_dereference(bi->backup_netdev);
>> > +
>> > + if (slave_netdev == backup_netdev) {
>> > + RCU_INIT_POINTER(bi->backup_netdev, NULL);
>> > + } else {
>> > + RCU_INIT_POINTER(bi->active_netdev, NULL);
>> > + if (backup_netdev) {
>> > + bypass_netdev->min_mtu = backup_netdev->min_mtu;
>> > + bypass_netdev->max_mtu = backup_netdev->max_mtu;
>> > + }
>> > + }
>> > +
>> > + dev_put(slave_netdev);
>> > +
>> > + netdev_info(bypass_netdev, "bypass slave:%s released\n",
>> > + slave_netdev->name);
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +int bypass_slave_unregister(struct net_device *slave_netdev)
>> > +{
>> > + struct net_device *bypass_netdev;
>> > + struct bypass_ops *bypass_ops;
>> > + int ret;
>> > +
>> > + if (!netif_is_bypass_slave(slave_netdev))
>> > + goto done;
>> > +
>> > + ASSERT_RTNL();
>> > +
>> > + bypass_netdev = bypass_master_get_bymac(slave_netdev->perm_addr,
>> > + &bypass_ops);
>> > + if (!bypass_netdev)
>> > + goto done;
>> > +
>> > + ret = bypass_slave_pre_unregister(slave_netdev, bypass_netdev,
>> > + bypass_ops);
>> > + if (ret != 0)
>> > + goto done;
>> > +
>> > + netdev_rx_handler_unregister(slave_netdev);
>> > + netdev_upper_dev_unlink(slave_netdev, bypass_netdev);
>> > + slave_netdev->priv_flags &= ~IFF_BYPASS_SLAVE;
>> > +
>> > + bypass_slave_release(slave_netdev, bypass_netdev, bypass_ops);
>> > +
>> > + netdev_info(bypass_netdev, "bypass slave:%s unregistered\n",
>> > + slave_netdev->name);
>> > +
>> > +done:
>> > + return NOTIFY_DONE;
>> > +}
>> > +EXPORT_SYMBOL_GPL(bypass_slave_unregister);
>> > +
>> > +static bool bypass_xmit_ready(struct net_device *dev)
>> > +{
>> > + return netif_running(dev) && netif_carrier_ok(dev);
>> > +}
>> > +
>> > +static int bypass_slave_link_change(struct net_device *slave_netdev)
>> > +{
>> > + struct net_device *bypass_netdev, *active_netdev, *backup_netdev;
>> > + struct bypass_ops *bypass_ops;
>> > + struct bypass_info *bi;
>> > +
>> > + if (!netif_is_bypass_slave(slave_netdev))
>> > + goto done;
>> > +
>> > + ASSERT_RTNL();
>> > +
>> > + bypass_netdev = bypass_master_get_bymac(slave_netdev->perm_addr,
>> > + &bypass_ops);
>> > + if (!bypass_netdev)
>> > + goto done;
>> > +
>> > + if (bypass_ops) {
>> > + if (!bypass_ops->slave_link_change)
>> > + goto done;
>> > +
>> > + return bypass_ops->slave_link_change(slave_netdev,
>> > + bypass_netdev);
>> > + }
>> > +
>> > + if (!netif_running(bypass_netdev))
>> > + return 0;
>> > +
>> > + bi = netdev_priv(bypass_netdev);
>> > +
>> > + active_netdev = rtnl_dereference(bi->active_netdev);
>> > + backup_netdev = rtnl_dereference(bi->backup_netdev);
>> > +
>> > + if (slave_netdev != active_netdev && slave_netdev != backup_netdev)
>> > + goto done;
>> You don't need this check. "if (!netif_is_bypass_slave(slave_netdev))"
>> above is enough.
>
>I think we need this check to not allow events from a slave that is not
>attached to this master but has the same MAC.
Why do we need such events? Seems wrong to me. Consider:
bp1 bp2
a1 b1 a2 b2
a1 and a2 have the same mac and bp1 and bp2 have the same mac.
Now bypass_master_get_bymac() will return always bp1 or bp2 - depending on
the order of creation.
Let's say it will return bp1. Then when we have event for a2, the
bypass_ops->slave_link_change is called with (a2, bp1). That is wrong.
You cannot use bypass_master_get_bymac() here.
>
>>
>>
>> > +
>> > + if ((active_netdev && bypass_xmit_ready(active_netdev)) ||
>> > + (backup_netdev && bypass_xmit_ready(backup_netdev))) {
>> > + netif_carrier_on(bypass_netdev);
>> > + netif_tx_wake_all_queues(bypass_netdev);
>> > + } else {
>> > + netif_carrier_off(bypass_netdev);
>> > + netif_tx_stop_all_queues(bypass_netdev);
>> > + }
>> > +
>> > +done:
>> > + return NOTIFY_DONE;
>> > +}
>> > +
>> > +static bool bypass_validate_event_dev(struct net_device *dev)
>> > +{
>> > + /* Skip parent events */
>> > + if (netif_is_bypass_master(dev))
>> > + return false;
>> > +
>> > + /* Avoid non-Ethernet type devices */
>> > + if (dev->type != ARPHRD_ETHER)
>> > + return false;
>> > +
>> > + /* Avoid Vlan dev with same MAC registering as VF */
>> > + if (is_vlan_dev(dev))
>> > + return false;
>> > +
>> > + /* Avoid Bonding master dev with same MAC registering as slave dev */
>> > + if ((dev->priv_flags & IFF_BONDING) && (dev->flags & IFF_MASTER))
>> Yeah, this is certainly incorrect. One thing is, you should be using the
>> helpers netif_is_bond_master().
>> But what about the rest? macsec, macvlan, team, bridge, ovs and others?
>>
>> You need to do it not by blacklisting, but with whitelisting. You need
>> to whitelist VF devices. My port flavours patchset might help with this.
>
>May be i can use netdev_has_lower_dev() helper to make sure that the slave
I don't see such function in the code.
>device is not an upper dev.
>Can you point to your port flavours patchset? Is it upstream?
I sent rfc couple of weeks ago:
[patch net-next RFC 00/12] devlink: introduce port flavours and common
phys_port_name generation
>
>>
>>
>> > + return false;
>> > +
>> > + return true;
>> > +}
>> > +
>> > +static int
>> > +bypass_event(struct notifier_block *this, unsigned long event, void *ptr)
>> > +{
>> > + struct net_device *event_dev = netdev_notifier_info_to_dev(ptr);
>> > +
>> > + if (!bypass_validate_event_dev(event_dev))
>> > + return NOTIFY_DONE;
>> > +
>> > + switch (event) {
>> > + case NETDEV_REGISTER:
>> > + return bypass_slave_register(event_dev);
>> > + case NETDEV_UNREGISTER:
>> > + return bypass_slave_unregister(event_dev);
>> > + case NETDEV_UP:
>> > + case NETDEV_DOWN:
>> > + case NETDEV_CHANGE:
>> > + return bypass_slave_link_change(event_dev);
>> > + default:
>> > + return NOTIFY_DONE;
>> > + }
>> > +}
>> > +
>> > +static struct notifier_block bypass_notifier = {
>> > + .notifier_call = bypass_event,
>> > +};
>> > +
>> > +int bypass_open(struct net_device *dev)
>> > +{
>> > + struct bypass_info *bi = netdev_priv(dev);
>> > + struct net_device *active_netdev, *backup_netdev;
>> > + int err;
>> > +
>> > + netif_carrier_off(dev);
>> > + netif_tx_wake_all_queues(dev);
>> > +
>> > + active_netdev = rtnl_dereference(bi->active_netdev);
>> > + if (active_netdev) {
>> > + err = dev_open(active_netdev);
>> > + if (err)
>> > + goto err_active_open;
>> > + }
>> > +
>> > + backup_netdev = rtnl_dereference(bi->backup_netdev);
>> > + if (backup_netdev) {
>> > + err = dev_open(backup_netdev);
>> > + if (err)
>> > + goto err_backup_open;
>> > + }
>> > +
>> > + return 0;
>> > +
>> > +err_backup_open:
>> > + dev_close(active_netdev);
>> > +err_active_open:
>> > + netif_tx_disable(dev);
>> > + return err;
>> > +}
>> > +EXPORT_SYMBOL_GPL(bypass_open);
>> > +
>> > +int bypass_close(struct net_device *dev)
>> > +{
>> > + struct bypass_info *vi = netdev_priv(dev);
>> This should be probably "bi"
>
>Yes.
>
>
>>
>>
>> > + struct net_device *slave_netdev;
>> > +
>> > + netif_tx_disable(dev);
>> > +
>> > + slave_netdev = rtnl_dereference(vi->active_netdev);
>> > + if (slave_netdev)
>> > + dev_close(slave_netdev);
>> > +
>> > + slave_netdev = rtnl_dereference(vi->backup_netdev);
>> > + if (slave_netdev)
>> > + dev_close(slave_netdev);
>> > +
>> > + return 0;
>> > +}
>> > +EXPORT_SYMBOL_GPL(bypass_close);
>> > +
>> > +static netdev_tx_t bypass_drop_xmit(struct sk_buff *skb, struct
>> > net_device *dev)
>> > +{
>> > + atomic_long_inc(&dev->tx_dropped);
>> > + dev_kfree_skb_any(skb);
>> > + return NETDEV_TX_OK;
>> > +}
>> > +
>> > +netdev_tx_t bypass_start_xmit(struct sk_buff *skb, struct net_device *dev)
>> > +{
>> > + struct bypass_info *bi = netdev_priv(dev);
>> If you rename the other variable to "bpmaster_dev", it would be nice to
>> rename this to bpinfo or something more descriptive. "bi" is too short
>> to know what that is right away.
>
>Will rename bypass_netdev to bypass_dev. bypass indicates that it is
>an upper master dev.
>
>
>>
>>
>> > + struct net_device *xmit_dev;
>> Don't mix "dev" and "netdev" in one .c file. Just use "dev" for all.
>
>OK.
>
>
>>
>>
>>
>> > +
>> > + /* Try xmit via active netdev followed by backup netdev */
>> > + xmit_dev = rcu_dereference_bh(bi->active_netdev);
>> > + if (!xmit_dev || !bypass_xmit_ready(xmit_dev)) {
>> > + xmit_dev = rcu_dereference_bh(bi->backup_netdev);
>> > + if (!xmit_dev || !bypass_xmit_ready(xmit_dev))
>> > + return bypass_drop_xmit(skb, dev);
>> > + }
>> > +
>> > + skb->dev = xmit_dev;
>> > + skb->queue_mapping = qdisc_skb_cb(skb)->slave_dev_queue_mapping;
>> > +
>> > + return dev_queue_xmit(skb);
>> > +}
>> > +EXPORT_SYMBOL_GPL(bypass_start_xmit);
>> > +
>> > +u16 bypass_select_queue(struct net_device *dev, struct sk_buff *skb,
>> > + void *accel_priv, select_queue_fallback_t fallback)
>> > +{
>> > + /* This helper function exists to help dev_pick_tx get the correct
>> > + * destination queue. Using a helper function skips a call to
>> > + * skb_tx_hash and will put the skbs in the queue we expect on their
>> > + * way down to the bonding driver.
>> > + */
>> > + u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0;
>> > +
>> > + /* Save the original txq to restore before passing to the driver */
>> > + qdisc_skb_cb(skb)->slave_dev_queue_mapping = skb->queue_mapping;
>> > +
>> > + if (unlikely(txq >= dev->real_num_tx_queues)) {
>> > + do {
>> > + txq -= dev->real_num_tx_queues;
>> > + } while (txq >= dev->real_num_tx_queues);
>> > + }
>> > +
>> > + return txq;
>> > +}
>> > +EXPORT_SYMBOL_GPL(bypass_select_queue);
>> > +
>> > +/* fold stats, assuming all rtnl_link_stats64 fields are u64, but
>> > + * that some drivers can provide 32bit values only.
>> > + */
>> > +static void bypass_fold_stats(struct rtnl_link_stats64 *_res,
>> > + const struct rtnl_link_stats64 *_new,
>> > + const struct rtnl_link_stats64 *_old)
>> > +{
>> > + const u64 *new = (const u64 *)_new;
>> > + const u64 *old = (const u64 *)_old;
>> > + u64 *res = (u64 *)_res;
>> > + int i;
>> > +
>> > + for (i = 0; i < sizeof(*_res) / sizeof(u64); i++) {
>> > + u64 nv = new[i];
>> > + u64 ov = old[i];
>> > + s64 delta = nv - ov;
>> > +
>> > + /* detects if this particular field is 32bit only */
>> > + if (((nv | ov) >> 32) == 0)
>> > + delta = (s64)(s32)((u32)nv - (u32)ov);
>> > +
>> > + /* filter anomalies, some drivers reset their stats
>> > + * at down/up events.
>> > + */
>> > + if (delta > 0)
>> > + res[i] += delta;
>> > + }
>> > +}
>> > +
>> > +void bypass_get_stats(struct net_device *dev, struct rtnl_link_stats64
>> > *stats)
>> > +{
>> > + struct bypass_info *bi = netdev_priv(dev);
>> You can WARN_ON and return in case the dev is not bypass master, just
>> to catch buggy drivers. Same with other helpers.
>
>I can make this static and not export this helper as well as all
>bypass_netdev ops.
Ok.
>
>>
>>
>> > + const struct rtnl_link_stats64 *new;
>> > + struct rtnl_link_stats64 temp;
>> > + struct net_device *slave_netdev;
>> > +
>> > + spin_lock(&bi->stats_lock);
>> > + memcpy(stats, &bi->bypass_stats, sizeof(*stats));
>> > +
>> > + rcu_read_lock();
>> > +
>> > + slave_netdev = rcu_dereference(bi->active_netdev);
>> > + if (slave_netdev) {
>> > + new = dev_get_stats(slave_netdev, &temp);
>> > + bypass_fold_stats(stats, new, &bi->active_stats);
>> > + memcpy(&bi->active_stats, new, sizeof(*new));
>> > + }
>> > +
>> > + slave_netdev = rcu_dereference(bi->backup_netdev);
>> > + if (slave_netdev) {
>> > + new = dev_get_stats(slave_netdev, &temp);
>> > + bypass_fold_stats(stats, new, &bi->backup_stats);
>> > + memcpy(&bi->backup_stats, new, sizeof(*new));
>> > + }
>> > +
>> > + rcu_read_unlock();
>> > +
>> > + memcpy(&bi->bypass_stats, stats, sizeof(*stats));
>> > + spin_unlock(&bi->stats_lock);
>> > +}
>> > +EXPORT_SYMBOL_GPL(bypass_get_stats);
>> > +
>> > +int bypass_change_mtu(struct net_device *dev, int new_mtu)
>> > +{
>> > + struct bypass_info *bi = netdev_priv(dev);
>> > + struct net_device *active_netdev, *backup_netdev;
>> > + int ret = 0;
>> Pointless initialization.
>>
>>
>> > +
>> > + active_netdev = rcu_dereference(bi->active_netdev);
>> > + if (active_netdev) {
>> > + ret = dev_set_mtu(active_netdev, new_mtu);
>> > + if (ret)
>> > + return ret;
>> > + }
>> > +
>> > + backup_netdev = rcu_dereference(bi->backup_netdev);
>> > + if (backup_netdev) {
>> > + ret = dev_set_mtu(backup_netdev, new_mtu);
>> > + if (ret) {
>> > + dev_set_mtu(active_netdev, dev->mtu);
>> > + return ret;
>> > + }
>> > + }
>> > +
>> > + dev->mtu = new_mtu;
>> > + return 0;
>> > +}
>> > +EXPORT_SYMBOL_GPL(bypass_change_mtu);
>> > +
>> > +void bypass_set_rx_mode(struct net_device *dev)
>> > +{
>> > + struct bypass_info *bi = netdev_priv(dev);
>> > + struct net_device *slave_netdev;
>> > +
>> > + rcu_read_lock();
>> > +
>> > + slave_netdev = rcu_dereference(bi->active_netdev);
>> > + if (slave_netdev) {
>> > + dev_uc_sync_multiple(slave_netdev, dev);
>> > + dev_mc_sync_multiple(slave_netdev, dev);
>> > + }
>> > +
>> > + slave_netdev = rcu_dereference(bi->backup_netdev);
>> > + if (slave_netdev) {
>> > + dev_uc_sync_multiple(slave_netdev, dev);
>> > + dev_mc_sync_multiple(slave_netdev, dev);
>> > + }
>> > +
>> > + rcu_read_unlock();
>> > +}
>> > +EXPORT_SYMBOL_GPL(bypass_set_rx_mode);
>> > +
>> > +static const struct net_device_ops bypass_netdev_ops = {
>> > + .ndo_open = bypass_open,
>> > + .ndo_stop = bypass_close,
>> > + .ndo_start_xmit = bypass_start_xmit,
>> > + .ndo_select_queue = bypass_select_queue,
>> > + .ndo_get_stats64 = bypass_get_stats,
>> > + .ndo_change_mtu = bypass_change_mtu,
>> > + .ndo_set_rx_mode = bypass_set_rx_mode,
>> > + .ndo_validate_addr = eth_validate_addr,
>> > + .ndo_features_check = passthru_features_check,
>> > +};
>> > +
>> > +#define BYPASS_DRV_NAME "bypass"
>> > +#define BYPASS_DRV_VERSION "0.1"
>> > +
>> > +static void bypass_ethtool_get_drvinfo(struct net_device *dev,
>> > + struct ethtool_drvinfo *drvinfo)
>> > +{
>> > + strlcpy(drvinfo->driver, BYPASS_DRV_NAME, sizeof(drvinfo->driver));
>> > + strlcpy(drvinfo->version, BYPASS_DRV_VERSION, sizeof(drvinfo->version));
>> > +}
>> > +
>> > +int bypass_ethtool_get_link_ksettings(struct net_device *dev,
>> > + struct ethtool_link_ksettings *cmd)
>> > +{
>> > + struct bypass_info *bi = netdev_priv(dev);
>> > + struct net_device *slave_netdev;
>> > +
>> > + slave_netdev = rtnl_dereference(bi->active_netdev);
>> > + if (!slave_netdev || !bypass_xmit_ready(slave_netdev)) {
>> > + slave_netdev = rtnl_dereference(bi->backup_netdev);
>> > + if (!slave_netdev || !bypass_xmit_ready(slave_netdev)) {
>> > + cmd->base.duplex = DUPLEX_UNKNOWN;
>> > + cmd->base.port = PORT_OTHER;
>> > + cmd->base.speed = SPEED_UNKNOWN;
>> > +
>> > + return 0;
>> > + }
>> > + }
>> > +
>> > + return __ethtool_get_link_ksettings(slave_netdev, cmd);
>> > +}
>> > +EXPORT_SYMBOL_GPL(bypass_ethtool_get_link_ksettings);
>> > +
>> > +static const struct ethtool_ops bypass_ethtool_ops = {
>> > + .get_drvinfo = bypass_ethtool_get_drvinfo,
>> > + .get_link = ethtool_op_get_link,
>> > + .get_link_ksettings = bypass_ethtool_get_link_ksettings,
>> > +};
>> > +
>> > +static void bypass_register_existing_slave(struct net_device
>> > *bypass_netdev)
>> > +{
>> > + struct net *net = dev_net(bypass_netdev);
>> > + struct net_device *dev;
>> > +
>> > + rtnl_lock();
>> > + for_each_netdev(net, dev) {
>> > + if (dev == bypass_netdev)
>> > + continue;
>> > + if (!bypass_validate_event_dev(dev))
>> > + continue;
>> > + if (ether_addr_equal(bypass_netdev->perm_addr, dev->perm_addr))
>> > + bypass_slave_register(dev);
>> > + }
>> > + rtnl_unlock();
>> > +}
>> > +
>> > +int bypass_master_register(struct net_device *dev, struct bypass_ops *ops,
>> > + struct bypass_master **pbypass_master)
>> > +{
>> > + struct bypass_master *bypass_master;
>> > +
>> > + bypass_master = kzalloc(sizeof(*bypass_master), GFP_KERNEL);
>> > + if (!bypass_master)
>> > + return -ENOMEM;
>> > +
>> > + rcu_assign_pointer(bypass_master->ops, ops);
>> > + dev_hold(dev);
>> > + dev->priv_flags |= IFF_BYPASS;
>> > + rcu_assign_pointer(bypass_master->bypass_netdev, dev);
>> > +
>> > + spin_lock(&bypass_lock);
>> > + list_add_tail(&bypass_master->list, &bypass_master_list);
>> > + spin_unlock(&bypass_lock);
>> > +
>> > + bypass_register_existing_slave(dev);
>> > +
>> > + *pbypass_master = bypass_master;
>> > + return 0;
>> > +}
>> > +EXPORT_SYMBOL_GPL(bypass_master_register);
>> > +
>> > +void bypass_master_unregister(struct bypass_master *bypass_master)
>> > +{
>> > + struct net_device *bypass_netdev;
>> > +
>> > + bypass_netdev = rcu_dereference(bypass_master->bypass_netdev);
>> > +
>> > + bypass_netdev->priv_flags &= ~IFF_BYPASS;
>> > + dev_put(bypass_netdev);
>> > +
>> > + spin_lock(&bypass_lock);
>> > + list_del(&bypass_master->list);
>> > + spin_unlock(&bypass_lock);
>> > +
>> > + kfree(bypass_master);
>> > +}
>> > +EXPORT_SYMBOL_GPL(bypass_master_unregister);
>> > +
>> > +int bypass_master_create(struct net_device *backup_netdev,
>> > + struct bypass_master **pbypass_master)
>> > +{
>> > + struct device *dev = backup_netdev->dev.parent;
>> > + struct net_device *bypass_netdev;
>> > + int err;
>> > +
>> > + /* Alloc at least 2 queues, for now we are going with 16 assuming
>> > + * that most devices being bonded won't have too many queues.
>> > + */
>> > + bypass_netdev = alloc_etherdev_mq(sizeof(struct bypass_info), 16);
>> > + if (!bypass_netdev) {
>> > + dev_err(dev, "Unable to allocate bypass_netdev!\n");
>> > + return -ENOMEM;
>> > + }
>> > +
>> > + dev_net_set(bypass_netdev, dev_net(backup_netdev));
>> > + SET_NETDEV_DEV(bypass_netdev, dev);
>> > +
>> > + bypass_netdev->netdev_ops = &bypass_netdev_ops;
>> > + bypass_netdev->ethtool_ops = &bypass_ethtool_ops;
>> > +
>> > + /* Initialize the device options */
>> > + bypass_netdev->priv_flags |= IFF_UNICAST_FLT | IFF_NO_QUEUE;
>> > + bypass_netdev->priv_flags &= ~(IFF_XMIT_DST_RELEASE |
>> > + IFF_TX_SKB_SHARING);
>> > +
>> > + /* don't acquire bypass netdev's netif_tx_lock when transmitting */
>> > + bypass_netdev->features |= NETIF_F_LLTX;
>> > +
>> > + /* Don't allow bypass devices to change network namespaces. */
>> > + bypass_netdev->features |= NETIF_F_NETNS_LOCAL;
>> > +
>> > + bypass_netdev->hw_features = NETIF_F_HW_CSUM | NETIF_F_SG |
>> > + NETIF_F_FRAGLIST | NETIF_F_ALL_TSO |
>> > + NETIF_F_HIGHDMA | NETIF_F_LRO;
>> > +
>> > + bypass_netdev->hw_features |= NETIF_F_GSO_ENCAP_ALL;
>> > + bypass_netdev->features |= bypass_netdev->hw_features;
>> > +
>> > + memcpy(bypass_netdev->dev_addr, backup_netdev->dev_addr,
>> > + bypass_netdev->addr_len);
>> > +
>> > + bypass_netdev->min_mtu = backup_netdev->min_mtu;
>> > + bypass_netdev->max_mtu = backup_netdev->max_mtu;
>> > +
>> > + err = register_netdev(bypass_netdev);
>> > + if (err < 0) {
>> > + dev_err(dev, "Unable to register bypass_netdev!\n");
>> > + goto err_register_netdev;
>> > + }
>> > +
>> > + netif_carrier_off(bypass_netdev);
>> > +
>> > + err = bypass_master_register(bypass_netdev, NULL, pbypass_master);
>> > + if (err < 0)
>> just "if (err)" would do.
>
>OK
>
>>
>>
>> > + goto err_bypass;
>> > +
>> > + return 0;
>> > +
>> > +err_bypass:
>> > + unregister_netdev(bypass_netdev);
>> > +err_register_netdev:
>> > + free_netdev(bypass_netdev);
>> > +
>> > + return err;
>> > +}
>> > +EXPORT_SYMBOL_GPL(bypass_master_create);
>> > +
>> > +void bypass_master_destroy(struct bypass_master *bypass_master)
>> > +{
>> > + struct net_device *bypass_netdev;
>> > + struct net_device *slave_netdev;
>> > + struct bypass_info *bi;
>> > +
>> > + if (!bypass_master)
>> > + return;
>> > +
>> > + bypass_netdev = rcu_dereference(bypass_master->bypass_netdev);
>> > + bi = netdev_priv(bypass_netdev);
>> > +
>> > + netif_device_detach(bypass_netdev);
>> > +
>> > + rtnl_lock();
>> > +
>> > + slave_netdev = rtnl_dereference(bi->active_netdev);
>> > + if (slave_netdev)
>> > + bypass_slave_unregister(slave_netdev);
>> > +
>> > + slave_netdev = rtnl_dereference(bi->backup_netdev);
>> > + if (slave_netdev)
>> > + bypass_slave_unregister(slave_netdev);
>> > +
>> > + bypass_master_unregister(bypass_master);
>> > +
>> > + unregister_netdevice(bypass_netdev);
>> > +
>> > + rtnl_unlock();
>> > +
>> > + free_netdev(bypass_netdev);
>> > +}
>> > +EXPORT_SYMBOL_GPL(bypass_master_destroy);
>> > +
>> > +static __init int
>> > +bypass_init(void)
>> > +{
>> > + register_netdevice_notifier(&bypass_notifier);
>> > +
>> > + return 0;
>> > +}
>> > +module_init(bypass_init);
>> > +
>> > +static __exit
>> > +void bypass_exit(void)
>> > +{
>> > + unregister_netdevice_notifier(&bypass_notifier);
>> > +}
>> > +module_exit(bypass_exit);
>> > +
>> > +MODULE_DESCRIPTION("Bypass infrastructure/interface for Paravirtual
>> > drivers");
>> > +MODULE_LICENSE("GPL v2");
>> > --
>> > 2.14.3
>> >
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
