I made a long test with two hfc-4s board in the same linux box. Telecom(NT1) -> TE channel -> Asterisk -> NT channel -> PBX
All the software is the most recent version (asterisk, kernel etc.etc.) Since i am not a newbie i made a lot of tests with many configurations, tryng to workaround all single problems. Near all working but there is some problem: 1) when there is no audio from asterisk a strange "choppy" sound come from the ISDN line or phone, this problem is deterministic, every time the a sound is missing this sound come out. 2) at the NT side im not able to config a "simple switch", how is possibile to do so? (simple switch is the "zaptel" switch -> ear a "dial" tone (i need italian tone) and after digit the number and wait connection) 3) when i use this cabling: TELCO(ISDN) -> TE channel -> Asterisk -> NT channel -> PBX(TE) I had some problem to route the call from outside to inside, the strange is that the PBX is able to call out, but seem to be unable to receive a call... 4) i made some test with this cabling PBX(ISDN) -> TE channel -> Asterisk -> NT channel -> TE channel -> Asterisk -> NT channel -> PHONE (one board full!) and also All ok, working! (both direction, two call, all channels used) PBX(ISDN) -> TE channel -> Asterisk -> NT channel -> TE channel -> Asterisk -> NT channel -> TE channel -> Asterisk -> NT channel -> TE channel -> Asterisk -> NT channel -> PHONE (all boards full!) With this kind of configuration calling from the NT -> TE side all working, calling from TE to the NT asterisk DIE. I dont know if this kind of test is able to reveal a bug in the driver, if needed i can reproduce the envirnonment and paste every debug information needed. I found the driver a very good work, le me know how is possibile to help in development to reach the 1.0 version. Thnks.
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Visdn-hackers mailing list [email protected] https://mailman.uli.it/mailman/listinfo/visdn-hackers
