> -----Original Message----- > From: Kaplan, Andrew H. [mailto:[EMAIL PROTECTED]] > > Hi there, > > Thanks for your reply. To answer your questions: > > 1. I do not have a firewall running. > > 2. When I tried to run the command within Telnet open > oneofxeon 5951, I got > the error message: > UNABLE TO CONNECT TO REMOTE HOST: CONNECTION REFUSED > > 3. I ran the nmap utility and port 177 came back as > 177/UDP OPEN XDMCP > When I ran the same command on port 5951 the results were > THE ONE SCANNED PORT IS: CLOSED > > The above shows that XDMCP is running, but the ports that I > had configured > are not open, what > can I do to correct this? Sounds like you don't have a VNCserver running. If you are trying the xinetd method of running the VNC server it looks like you might want to check your config files. You should also be able to check /var/log/messages and see if any errors are being logged.
I've never tried setting it up with that method so I can't help much with that. Have you tried just running "vncserver" or using Xvnc and passing the commands to it manually instead of using xinetd? -- William Hooper _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list
