volt-nuts

Messages by Date

2018/06/13 [volt-nuts] Reminder -- febo.com Mailing List Changes John Ackermann N8UR
2018/06/06 Re: [volt-nuts] febo.com Mailing List Changes Jerry Hancock
2018/06/06 [volt-nuts] febo.com Mailing List Changes John Ackermann N8UR
2018/06/01 Re: [volt-nuts] 3457A battery replacement at Keysight - not as cheap as I thought it would be! Dr. David Kirkby
2018/05/26 Re: [volt-nuts] 3457A battery replacement at Keysight - not Electronics and Books via volt-nuts
2018/05/24 Re: [volt-nuts] 3457A battery replacement at Keysight - not as cheap as I thought it would be! Dr. David Kirkby
2018/05/24 Re: [volt-nuts] 3457A battery replacement at Keysight - not as cheap as I thought it would be! Laurence Motteram
2018/05/24 [volt-nuts] 3457A battery replacement at Keysight - not as cheap as I thought it would be! Dr. David Kirkby
2018/05/22 [volt-nuts] Datron 1281 DMM Serial Interface Fault starbook
2018/05/15 Re: [volt-nuts] EU3458A - what appears to be a 3458A for sales in the European Union only Dr. Frank
2018/05/15 Re: [volt-nuts] EU3458A - what appears to be a 3458A for sales in the European Union only Poul-Henning Kamp
2018/05/15 [volt-nuts] 3458A memory extension Dr. Frank
2018/05/15 [volt-nuts] EU3458A - what appears to be a 3458A for sales in the European Union only Dr. Frank
2018/05/15 Re: [volt-nuts] 3457A (6.5 digit multi-meter). Is it best to keep it on? Todd Micallef
2018/05/15 [volt-nuts] 3457A (6.5 digit multi-meter). Is it best to keep it on? Dr. David Kirkby
2018/05/14 Re: [volt-nuts] volt-nuts Digest, Vol 105, Issue 8 David C. Partridge
2018/05/14 Re: [volt-nuts] volt-nuts Digest, Vol 105, Issue 8 Dan Kemppainen
2018/05/14 Re: [volt-nuts] EU3458A - what appears to be a 3458A for sales in the European Union only. Dr. David Kirkby
2018/05/14 [volt-nuts] EU3458A - what appears to be a 3458A for sales in the European Union only. Dr. David Kirkby
2018/05/10 Re: [volt-nuts] Two 4338B high resistance meters fail on the same range - Keysight can't adjust EEPROM of either. Dr. David Kirkby
2018/05/04 Re: [volt-nuts] Ayrton Shunt does double duty. Bruce Griffiths
2018/05/04 Re: [volt-nuts] Ayrton Shunt does double duty. Bruce Griffiths
2018/05/04 Re: [volt-nuts] Ayrton Shunt does double duty. geoelectronics
2018/05/04 Re: [volt-nuts] Ayrton Shunt does double duty. Dr. David Kirkby
2018/05/02 Re: [volt-nuts] Two 4338B high resistance meters fail on the same range - Keysight can't adjust EEPROM of either. Dr. David Kirkby
2018/05/02 Re: [volt-nuts] Two 4338B high resistance meters fail on the same range - Keysight can't adjust EEPROM of either. Charles Steinmetz
2018/05/02 Re: [volt-nuts] Two 4338B high resistance meters fail on the same range - Keysight can't adjust EEPROM of either. geoelectronics
2018/05/02 Re: [volt-nuts] Two 4338B high resistance meters fail on the same range - Keysight can't adjust EEPROM of either. geoelectronics
2018/05/02 Re: [volt-nuts] Two 4338B high resistance meters fail on the same range - Keysight can't adjust EEPROM of either. Dr. David Kirkby
2018/05/02 Re: [volt-nuts] Two 4338B high resistance meters fail on the same range - Keysight can't adjust EEPROM of either. geoelectronics
2018/05/02 Re: [volt-nuts] Two 4338B high resistance meters fail on the same range - Keysight can't adjust EEPROM of either. Dr. David Kirkby
2018/05/02 Re: [volt-nuts] Two 4338B high resistance meters fail on the same range - Keysight can't adjust EEPROM of either. Illya Tsemenko
2018/05/02 Re: [volt-nuts] Two 4338B high resistance meters fail on the same range - Keysight can't adjust EEPROM of either. David C. Partridge
2018/05/01 [volt-nuts] Two 4338B high resistance meters fail on the same range - Keysight can't adjust EEPROM of either. Dr. David Kirkby
2018/05/01 Re: [volt-nuts] [offlist] Re: Cropico DO4A Digital Ohmmeter geoelectronics
2018/05/01 Re: [volt-nuts] [offlist] Re: Cropico DO4A Digital Ohmmeter Nigel Clarke via volt-nuts
2018/04/30 Re: [volt-nuts] Ayrton Shunt does double duty. geoelectronics
2018/04/30 Re: [volt-nuts] Ayrton Shunt does double duty. Mitch Van Ochten
2018/04/30 Re: [volt-nuts] Ayrton Shunt does double duty. geoelectronics
2018/04/30 Re: [volt-nuts] [offlist] Re: Cropico DO4A Digital Ohmmeter geoelectronics
2018/04/30 Re: [volt-nuts] Ayrton Shunt does double duty. jasonpepas
2018/04/30 Re: [volt-nuts] [offlist] Re: Cropico DO4A Digital Ohmmeter Nigel Clarke via volt-nuts
2018/04/30 [volt-nuts] Ayrton Shunt does double duty. geoelectronics
2018/04/30 [volt-nuts] [offlist] Re: Cropico DO4A Digital Ohmmeter Charles Steinmetz
2018/04/30 Re: [volt-nuts] Cropico DO4A Digital Ohmmeter Dr. David Kirkby
2018/04/30 Re: [volt-nuts] Cropico DO4A Digital Ohmmeter Nigel Clarke via volt-nuts
2018/04/30 Re: [volt-nuts] Cropico DO4A Digital Ohmmeter Nigel Clarke via volt-nuts
2018/04/29 Re: [volt-nuts] Cropico DO4A Digital Ohmmeter Bob Albert via volt-nuts
2018/04/29 Re: [volt-nuts] Cropico DO4A Digital Ohmmeter geoelectronics
2018/04/29 Re: [volt-nuts] Cropico DO4A Digital Ohmmeter Bob Albert via volt-nuts
2018/04/29 Re: [volt-nuts] Cropico DO4A Digital Ohmmeter Dr. David Kirkby
2018/04/29 Re: [volt-nuts] Cropico DO4A Digital Ohmmeter Nigel Clarke via volt-nuts
2018/04/29 Re: [volt-nuts] Cropico DO4A Digital Ohmmeter Didier Juges
2018/04/29 [volt-nuts] Cropico DO4A Digital Ohmmeter Nigel Clarke via volt-nuts
2018/04/24 Re: [volt-nuts] Would you be concerned if the manufacturer does not have an uncertainty budget, so can't provide uncertainties in a calibration? Dr. David Kirkby
2018/04/23 Re: [volt-nuts] Would you be concerned if the manufacturer does not have an uncertainty budget, so can't provide uncertainties in a calibration? Florian Teply
2018/04/23 Re: [volt-nuts] Would you be concerned if the manufacturer does not have an uncertainty budget, so can't provide uncertainties in a calibration? Dr. David Kirkby
2018/04/21 [volt-nuts] First Light: IET HSVR + KVD = 05.00000V @ 18.5 Degrees C geoelectronics
2018/04/21 Re: [volt-nuts] Would you be concerned if the manufacturer does not have an uncertainty budget, so can't provide uncertainties in a calibration? Florian Teply
2018/04/20 Re: [volt-nuts] Would you be concerned if the manufacturer does not have an uncertainty budget, so can't provide uncertainties in a calibration? Dr. David Kirkby
2018/04/19 Re: [volt-nuts] Would you be concerned if the manufacturer does not have an uncertainty budget, so can't provide uncertainties in a calibration? acbern
2018/04/19 Re: [volt-nuts] Would you be concerned if the manufacturer does not have an uncertainty budget, so can't provide uncertainties in a calibration? Dr. David Kirkby
2018/04/19 Re: [volt-nuts] Would you be concerned if the manufacturer does not have an uncertainty budget, so can't provide uncertainties in a calibration? acbern
2018/04/19 [volt-nuts] Would you be concerned if the manufacturer does not have an uncertainty budget, so can't provide uncertainties in a calibration? Dr. David Kirkby
2018/04/16 [volt-nuts] Intro Geo-K0FF geoelectronics
2018/04/12 Re: [volt-nuts] 3458A Multi-Year Calibration/Service Agreement Todd Micallef
2018/04/12 [volt-nuts] 3458A Multi-Year Calibration/Service Agreement Don@True-Cal
2018/04/11 Re: [volt-nuts] Does desoldering and resoldering an LTZ1000A reset the ageing? Andreas Jahn
2018/04/11 Re: [volt-nuts] Does desoldering and resoldering an LTZ1000A reset the ageing? Poul-Henning Kamp
2018/04/11 [volt-nuts] Does desoldering and resoldering an LTZ1000A reset the ageing? Dr. David Kirkby
2018/04/11 [volt-nuts] Does desoldering and resoldering an LTZ1000A reset the ageing? Dr. David Kirkby
2018/04/04 Re: [volt-nuts] Open day at the National Physical Laboratory (NPL) on Thursday 17 May 2018. Dr. David Kirkby
2018/04/03 Re: [volt-nuts] Open day at the National Physical Laboratory (NPL) on Thursday 17 May 2018. Jeremy Nichols
2018/04/03 [volt-nuts] Open day at the National Physical Laboratory (NPL) on Thursday 17 May 2018. Dr. David Kirkby
2018/03/27 [volt-nuts] doc/cal info DMM Fluke 7600A CGM de Bruijn
2018/03/24 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Dr. David Kirkby
2018/03/24 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? NeonJohn
2018/03/24 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Jeremy Nichols
2018/03/24 [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Mark Sims
2018/03/23 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? ed breya
2018/03/23 Re: [volt-nuts] Help needed identifying triaxial connector on HP 4339B high resistance meter - measures to 1.6 x 10^16 ohms. Dr. David Kirkby
2018/03/23 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Dr. David Kirkby
2018/03/23 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? ed breya
2018/03/23 Re: [volt-nuts] Help needed identifying triaxial connector on HP 4339B high resistance meter - measures to 1.6 x 10^16 ohms. Jerry Hancock
2018/03/23 Re: [volt-nuts] Help needed identifying triaxial connector on HP 4339B high resistance meter - measures to 1.6 x 10^16 ohms. Stephen Locke
2018/03/22 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Bruce Griffiths
2018/03/22 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Neville Michie
2018/03/22 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? kc9ieq via volt-nuts
2018/03/22 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Dr. David Kirkby
2018/03/22 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Dr. David Kirkby
2018/03/22 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? kc9ieq via volt-nuts
2018/03/22 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Dr. David Kirkby
2018/03/22 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Dr Joe Palsa P.E. via volt-nuts
2018/03/22 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Jerry Hancock
2018/03/22 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Bob Albert via volt-nuts
2018/03/22 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Laurence Motteram
2018/03/22 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Bob Albert via volt-nuts
2018/03/22 Re: [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Bruce Griffiths
2018/03/22 [volt-nuts] How can I make a 2000 V DC meter with an input resistance of at least 100 T ohms? Dr. David Kirkby
2018/03/17 [volt-nuts] Bohnenberger electrometer Mark Sims
2018/03/16 Re: [volt-nuts] Bohnenberger electrometer Neville Michie
2018/03/16 Re: [volt-nuts] Bohnenberger electrometer Bruce Griffiths
2018/03/16 Re: [volt-nuts] Bohnenberger electrometer ed breya
2018/03/16 Re: [volt-nuts] Bohnenberger electrometer Hendrik
2018/03/16 Re: [volt-nuts] Bohnenberger electrometer ed breya
2018/03/16 Re: [volt-nuts] Bohnenberger electrometer Fred
2018/03/16 Re: [volt-nuts] Bohnenberger electrometer Dr. David Kirkby
2018/03/08 Re: [volt-nuts] Bohnenberger electrometer DANGER ed breya
2018/03/08 Re: [volt-nuts] Bohnenberger electrometer DANGER Dr. David Kirkby
2018/03/08 Re: [volt-nuts] Vibrating reed electrometers ed breya
2018/03/07 Re: [volt-nuts] Bohnenberger electrometer DANGER Andre
2018/03/07 Re: [volt-nuts] Bohnenberger electrometer DANGER Dr. David Kirkby
2018/03/06 Re: [volt-nuts] Bohnenberger electrometer DANGER Andre
2018/03/06 Re: [volt-nuts] Bohnenberger electrometer ed breya
2018/03/06 Re: [volt-nuts] Vibrating reed electrometers ed breya
2018/03/06 Re: [volt-nuts] Bohnenberger electrometer ed breya
2018/03/06 Re: [volt-nuts] Vibrating reed electrometers ed breya
2018/03/06 Re: [volt-nuts] Bohnenberger electrometer ed breya
2018/03/06 Re: [volt-nuts] Bohnenberger electrometer Brooke Clarke
2018/03/06 [volt-nuts] Bohnenberger electrometer Dr. David Kirkby
2018/03/03 Re: [volt-nuts] Vibrating reed electrometers Bruce Griffiths
2018/03/03 [volt-nuts] Vibrating reed electrometers george
2018/03/02 Re: [volt-nuts] Precision high resistance measurements / calibration of HP 4339B high-resistance meter. Mitch Van Ochten
2018/03/02 Re: [volt-nuts] Precision high resistance measurements / calibration of HP 4339B high-resistance meter. ed breya
2018/03/02 Re: [volt-nuts] Precision high resistance measurements / calibration of HP 4339B high-resistance meter. Fix? Dr. David Kirkby
2018/03/02 Re: [volt-nuts] Precision high resistance measurements / calibration of HP 4339B high-resistance meter. Fix? Andre
2018/03/01 Re: [volt-nuts] LM3900 (was: HP3458 ADC integrator) Instrumentation Amplifiers (3) Andre
2018/03/01 [volt-nuts] Precision high resistance measurements / calibration of HP 4339B high-resistance meter. Dr. David Kirkby
2018/03/01 Re: [volt-nuts] LM3900 Charles Steinmetz
2018/03/01 [volt-nuts] LM3900 (was: HP3458 ADC integrator) Attila Kinali
2018/02/27 [volt-nuts] Bits in ancient Panasonic phone Andre
2018/02/27 Re: [volt-nuts] HP3458 ADC integrator (SPARES) Andre
2018/02/27 Re: [volt-nuts] HP3458 ADC integrator Attila Kinali
2018/02/23 Re: [volt-nuts] HP3458 ADC integrator David C. Partridge
2018/02/23 Re: [volt-nuts] HP3458 ADC integrator Bruce Griffiths
2018/02/23 Re: [volt-nuts] HP3458 ADC integrator Bruce Griffiths
2018/02/23 Re: [volt-nuts] HP3458 ADC integrator David C. Partridge
2018/02/23 Re: [volt-nuts] HP3458 ADC integrator Bruce Griffiths
2018/02/23 Re: [volt-nuts] HP3458 ADC integrator Attila Kinali
2018/02/23 Re: [volt-nuts] FW: HP3458 ADC integrator Attila Kinali
2018/02/23 Re: [volt-nuts] HP3458 ADC integrator Bruce Griffiths
2018/02/23 Re: [volt-nuts] HP3458 ADC integrator Bruce Griffiths
2018/02/23 Re: [volt-nuts] HP3458 ADC integrator David C. Partridge
2018/02/23 Re: [volt-nuts] HP3458 ADC integrator Attila Kinali
2018/02/23 Re: [volt-nuts] HP3458 ADC integrator Attila Kinali
2018/02/23 Re: [volt-nuts] HP3458 ADC integrator David C. Partridge
2018/02/23 [volt-nuts] HP3458 ADC integrator Attila Kinali
2018/02/17 Re: [volt-nuts] Low noise reference jasonpepas
2018/02/17 Re: [volt-nuts] Low noise reference jasonpepas
2018/02/17 Re: [volt-nuts] Help needed identifying triaxial connector on HP 4339B high resistance meter - measures to 1.6 x 10^16 ohms. Florian Teply
2018/02/17 Re: [volt-nuts] Low noise reference Randy Evans
2018/02/17 [volt-nuts] Help needed identifying triaxial connector on HP 4339B high resistance meter - measures to 1.6 x 10^16 ohms. Dr. David Kirkby
2018/02/17 Re: [volt-nuts] Low noise reference Andre
2018/02/17 Re: [volt-nuts] Low noise reference Andre
2018/02/17 Re: [volt-nuts] Low noise reference Poul-Henning Kamp
2018/02/16 [volt-nuts] Low noise reference Randy Evans
2018/02/14 Re: [volt-nuts] Firmware on HP 3457A - can it be upgraded? Illya Tsemenko
2018/02/14 [volt-nuts] Firmware on HP 3457A - can it be upgraded? Dr. David Kirkby
2018/02/11 [volt-nuts] Prema 6048 new ROM images as at February 2018 David C. Partridge
2018/02/06 Re: [volt-nuts] Reading out Calibration data from Datron/Wavetek 4808? Daniel Mendes
2018/02/06 [volt-nuts] Reading out Calibration data from Datron/Wavetek 4808? David C. Partridge
2018/01/24 [volt-nuts] Anyone with a recently calibrated 3458A near Coventry in UK? David C. Partridge
2018/01/24 [volt-nuts] Parts for 3458A David C. Partridge
2018/01/23 Re: [volt-nuts] Redrafted schematic of Fluke 732A reference circuit roman
2018/01/23 Re: [volt-nuts] Redrafted schematic of Fluke 732A reference circuit David C. Partridge
2018/01/23 Re: [volt-nuts] Redrafted schematic of Fluke 732A reference circuit romeo987
2018/01/21 Re: [volt-nuts] Redrafted schematic of Fluke 732A reference circuit David C. Partridge
2018/01/21 Re: [volt-nuts] Redrafted schematic of Fluke 732A reference circuit m k
2018/01/21 Re: [volt-nuts] Redrafted schematic of Fluke 732A reference circuit Bob Albert via volt-nuts
2018/01/21 Re: [volt-nuts] Redrafted schematic of Fluke 732A reference circuit David C. Partridge
2018/01/21 [volt-nuts] Redrafted schematic of Fluke 732A reference circuit David C. Partridge
2018/01/20 Re: [volt-nuts] Fluke 732A schematic re-drawn? David C. Partridge
2018/01/20 Re: [volt-nuts] Fluke 732A schematic re-drawn? Bill Gold
2018/01/20 Re: [volt-nuts] Fluke 732A schematic re-drawn? Todd Micallef
2018/01/20 Re: [volt-nuts] Fluke 732A schematic re-drawn? Bill Gold
2018/01/19 Re: [volt-nuts] Prema 6048 zero offset problems David C. Partridge
2018/01/19 [volt-nuts] Fluke 732A schematic re-drawn? David C. Partridge
2018/01/18 Re: [volt-nuts] Prema 6048 zero offset problems Bruce Griffiths
2018/01/18 [volt-nuts] Prema 6048 zero offset problems David C. Partridge
2018/01/16 Re: [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? J. L. Trantham
2018/01/16 Re: [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? Dr. David Kirkby
2018/01/16 [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? Dr. Frank
2018/01/16 Re: [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? David C. Partridge
2018/01/16 [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? Dr. Frank
2018/01/16 Re: [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? Dr. David Kirkby
2018/01/16 [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? Dr. Frank
2018/01/16 Re: [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? Dr. David Kirkby
2018/01/16 [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? Dr. Frank
2018/01/16 Re: [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? J. L. Trantham
2018/01/16 Re: [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? Dr. David Kirkby
2018/01/16 Re: [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? Dr. David Kirkby
2018/01/15 Re: [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? John Phillips
2018/01/15 Re: [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? J. L. Trantham
2018/01/15 Re: [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? J. L. Trantham
2018/01/15 [volt-nuts] What's the probability of a random used 3458A passing a Keysight calibration? Dr. David Kirkby
2018/01/15 Re: [volt-nuts] Any list members in UK who can accurately characterise a 732A and a 10K resistor 4HV.org David C. Partridge
2018/01/14 Re: [volt-nuts] Any list members in UK who can accurately characterise a 732A and a 10K resistor 4HV.org Andre
2018/01/14 Re: [volt-nuts] Any list members in UK who can accurately characterise a 732A and a 10K resistor David C. Partridge
2018/01/14 Re: [volt-nuts] Any list members in UK who can accurately characterise a 732A and a 10K resistor David C. Partridge
2018/01/14 Re: [volt-nuts] Any list members in UK who can accurately characterise a 732A and a 10K resistor Dr. David Kirkby

Earlier messages