Further information: Shorting pins 5 and 6 of PL2 causes the same symptoms, as does pressing and holding the DIG FILT key on another meter.
The odd thing is though that an ohms test between 5 and 6 of keyboard is OC - which does not make sense to me? Dave -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of David C. Partridge Sent: 30 January 2013 17:15 To: 'Discussion of precise voltage measurement' Subject: Re: [volt-nuts] Solartron 7071 beeping about twice a second Joe, Looks like you win the prize for remote diagnosis! Disconnecting PL2 which goes to the keyboard, and it all comes up nicely. What I can do about that though I am not at all sure ... :( Dave -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of J. L. Trantham Sent: 29 January 2013 03:14 To: 'Discussion of precise voltage measurement' Subject: Re: [volt-nuts] Solartron 7071 beeping about twice a second I wonder if it might mean multiple 'stuck' buttons on the front panel. Any way to check that? Perhaps disconnecting the front panel and reconnecting? Perhaps making measurements on the front panel itself? Good luck. Joe _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
