Fellow Volt-nuts
I have recently acquired a Fluke 732A which required a new set of 6 volt, 4 Ah
batteries which after some re-working of the top plate of the battery
compartment, to accommodate the lugs of the Yuasa cells are now installed and
working fine. I am very pleased with this instrument having spent 12 or more
years with two 731B’s . The oven stability is very good, a resistance of 4.520
K ohms being within +/-1 ohm. I have a down-loaded manual P/N 645051, May 1983
which is somewhat ‘out of date’ for my instrument which was issued 1989/90. Is
it possible that anyone has a later issue ? For example, the rear AC/DC support
power supply input in my manual copy shows a pair of 4 m/m, where mine has a
3-pin socket (male) for this purpose. Anyone know the type/manufacturer of this
item ?
This is a very well made instrument, and I gather that many think it better
than the 732B ? Any help would be appreciated.
Roy
_______________________________________________
volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
