The dreaded 202 convergence error, If you need help contact me off list. Best Wishes;
Thomas Knox > From: pit...@williams-net.com > To: volt-nuts@febo.com > Date: Thu, 27 Mar 2014 14:35:42 -0400 > Subject: [volt-nuts] 3458a with 202: Slave Test Convergence (sigh) > > I know that HP will (gladly?) take your sick 3458 and bring it up to current > specs, followed by a calibration. Since my sick one is at engineering level 2 > or 3.something, it must be like it was built in 1989 - the dates on some > components. > > Should I try to do any troubleshooting, or just send it to HP? > > Will they upgrade the current (aged and pretty much not drifting) boards? > > Or do they take a good board from their stock and replace the current board > with one that may be new and 'drifty'? > > I have read here that there are some unlisted upgrades that they do, also. > > The RAM batteries will be replaced also, right? > > The biggest positive I see is the ability to go on the service plan and never > have to worry about a failure again after the 3458 is brought up to current > standards. > > Willy > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
