I just took out the battery and it is a Tenergy 3.6 VDC 1200mAH ER14250 with tabs welded on.
Randy On Tue, Apr 22, 2014 at 9:08 PM, Randy Evans <randyevans2...@gmail.com>wrote: > Todd, > > That does look like the battery in my 1082. I don't see any markings on > the battery in my unit but I can't see the back side until I remove it. > > I assume the original was 3.6 VDC also but I'm not sure how to verify > that. > > Thanks for the help. > > Randy > > > On Tue, Apr 22, 2014 at 7:07 PM, T. Micallef <tmical...@gmail.com> wrote: > >> Randy Evans <randyevans2688@...> writes: >> >> > >> > The schematic of the Datron 1071 DMM seems to be very similar to the >> Datron >> > 1082 but I'm sure there are differences. Unfortunately, I have not been >> > able to locate the 1082 Service Manual with the parts lists and >> schematics. >> > The 1071 manual does have a similar or identical battery but I can't >> find >> > the part number in the 1071 parts list. Does anyone know the part >> number >> > of the memory battery in the 1082 or 1071, or the characteristics; e.g., >> > voltage and A-H rating? >> > >> > Thanks, >> > >> > Randy Evans AE6YG >> > >> > On Mon, Apr 21, 2014 at 8:32 PM, Tom Knox <actast@...> wrote: >> > >> >> I popped the top off of my mothballed 1071 and it looks like a 1/2AA >> battery >> based on physical measurements. It looks like the one in the following >> link >> >> http://www.zbattery.com/Tadiran-TL-5151-with-tabs-1-2-AA-Lithium-Battery >> >> Todd >> >> _______________________________________________ >> volt-nuts mailing list -- volt-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts >> and follow the instructions there. >> > > _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.