PeLuLe,
I've a Fluke 9010A with a 9000A-68000 pod.
This equipment is capable to read out the cal ram data, if you know the
adresses, but as binary information.
Can this be of any help?
WimdJ
Op 18-2-2016 om 20:37 schreef [email protected]:
Yes, I absolutey agree. Also in my understandig a good re-engineering means a
reproducabel, secure and as good as possible documented.
Due to the sensivity of a possible CAL-Data damage the tests for verification
should be well prepared.
I am actually digging into the firmware, to check how the data is processed.
My "worst case" scenario is, if there is no suitable command, to add one by
extendig the firmware.
There is ~4k used ROM space free for, should be more than enought.
BR
PeLuLe
Gesendet: Donnerstag, 18. Februar 2016 um 04:41 Uhr
Von: "Illya Tsemenko" <[email protected]>
An: "[email protected]" <[email protected]>
Betreff: [volt-nuts] Fw: Datron 1281 / 1271 secret GPIB cmds for CALRAM-Readout
PeLuLe, thank you for files.
The only reason why article hidden from list, is it's draft status. I'd like to
publish well-prepared and detailed content, which can be used by other
volt-nuts without confusion.
It's still work in progress, so if you have anything to correct or contribute,
feel free to share.
BR,
Illya "TiN" Tsemenko
_______________________________________________
volt-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
_______________________________________________
volt-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
_______________________________________________
volt-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
