Hello The Net:
Every test bench needs an assortment of current shunts.
Some of mine are: 100 Amps will give a 50 millivolt drop across it at
100A load..
Another is a 50 Amp shunt that gives 50 millivolts across it when
loaded to 50A.
Then use a DVM to measure the voltage drop.
Also have a FLUKE current probe "clamp on" using a Hall effect
technique, to measure AC and DC current.
A Ebay search should give some cost effective results for a current
shunt, just for an idea.
Stan, W1LE Cape Cod FN41sr
ZZZZz
_______________________________________________
volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.