Mark, Yes, my fall-back position is to do a 3D design (the tricky bit will be the bit that locks onto the plunger, and the transparent circular window for the LED light).
Dave -----Original Message----- From: volt-nuts [mailto:volt-nuts-boun...@febo.com] On Behalf Of Mark Sims Sent: 01 July 2017 17:30 To: volt-nuts@febo.com Subject: [volt-nuts] Current Button for Datron calibrator (4800, 4805, 4807, 4808) I used to make button / keytops by making a mold of a compatible one in clay or silicone rubber and filling it with epoxy followed by a lot of fiddly work carving out the interface to the keyswitch plunger. These days 3D printers are your (frustrating) plastic pal who's fun to be with. _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there. _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
