Ken Thank you for contacting Mr Datron! I've emailed the Fluke service centre, though whether the new Danaher managed organisation will be prepared to help is an open question.
I believe that I know the location of a manual set for the 4808 with a co-located A3 scanner. What I don't know is how complete those manuals are. Cheers Dave -----Original Message----- From: volt-nuts [mailto:volt-nuts-boun...@febo.com] On Behalf Of Ken Peek Sent: 01 July 2017 20:48 To: volt-nuts Subject: Re: [volt-nuts] Current Button for Datron calibrator (4800, 4805, 4807, 4808) Hi David, I already checked with John Pickering, and he does not have anything for the 480x series. He suggested contacting the Fluke service center there in the UK. Fluke bought Datron/Wavetek, and they inherited all of the manuals, parts, and IP. IIRC, the UK Fluke service center *IS* the old Datron factory/service department. John said that that service center has ONE "golden" manual set for the 480x services calibrators-- but it is in paper format. I suspect that they don't have the bandwidth to convert that into a nice PDF, or they would have done that already. You might get in touch with them, to see if some kind of deal can be struck-- where you agree to scan the manuals and make a PDF for them (if they give you access). It might be a thing where you would have to bring your laptop and scanner to their office (so the paper manuals never leave). If you DO get the opportunity to make this happen-- please upload it for the rest of us to use! As for the parts-- again, maybe the Fluke service center has some parts in a dusty old box somewhere that might have what you need. You might want to get to know them-- perhaps some premium beer (or ale) at the local pub will help ... ? Cheers, Ken ========================== *David C. Partridge* david.partridge at perdrix.co.uk <volt-nuts%40febo.com?Subject=Re%3A%20%5Bvolt-nuts%5D%20Current%20Button%20for%20Datron%20calibrator%20%284800%2C%204805%2C%204807%2C%0A%094808%29&In-Reply-To=%3C000901d2f1cb%2462d691d0%242883b570%24%40perdrix.co.uk%3E> *Fri Jun 30 14:04:56 EDT 2017* I'm on the lookout for a button for a Datron 4800 series calibrator which may be a bit of a long shot. It's the one between the Ω and AC buttons with the Legend "I" (uppercase i). An even longer shot - my front panel is a bit bashed - has anyone got one spare? You never know someone may have a spares mule! Also (Ho! Ho!) does anyone know the whereabouts of a complete Operator manual (with the Verification and Calibration sections), and the Service Manual for a 4808? Thanks Dave ------------------------------ _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there. _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
