----- Original Message -----
Sent: Monday, June 30, 2003 12:28
AM
Subject: [VOPRadius] ADSL Aggregation
Questions
Hi,
We are also another ISP from Saudi Arabia, where we also
have the same issue. The Billing software we are using is Hawk-i. So please
give us the solution with regards to the below mentioned problem.
With regards to our ISP, the exisiting Dialup & ADSL customers
are logging with their domain names
[EMAIL PROTECTED], suppose if i
create usernames with multiple domain names like
[EMAIL PROTECTED] ,
[EMAIL PROTECTED] how should i
configure the radius so that it will authenticate all the users with different
domain names.
Awaiting an early reply from you.
Best Regards
A.Thameemul Ansari
P.O.Box 16382
Riyadh
11464
K.S.A
PH-966-1-4192009(Off)
Fax-966-1-4191942
MOB-96656979294
----- Original Message -----
From: Kais Al-Essa
Sent: 6/29/2003 1:46:54 PM
To: [EMAIL PROTECTED];[EMAIL PROTECTED]
Subject: [VOPRadius] ADSL Aggregation Questions
Hello,
We are using
Rodopi 5.3 (latest) with Windows 2000, SQL 2000, and the latest version of
Vircom Radius.
We currently
service Dial-up accounts (prepaid and normal accounts) and ADSL customers.
These two types of customer authenticate through the Vircom Radius that we
have.
The current
situation is that all ADSLs come to us as single PVCs per customer. This is
problematic as we have to maintain 100s of PVCs on the router. This method is
being changed gradually now to use in between the ADSL and our routers a
SHASTA aggregator. Then only one PVC will be created between each Shasta and
our routers. Inside this PVC all users will come to us in a UBR
PVC.
Now another issue
is speed controls. Currently, we control each user's speed through his
specific PVC by usage of bandwidth shaping (UBR command). But with the new
setup after the aggregation, the user will be controlled by the network
provider through the domain name. For example, a customer who purchases 256k
ADSL would have to loginto the service (PPPoE) through the following user
name: [EMAIL PROTECTED] . Now if the user
speed was 64k, then he would have to login with the following user name: [EMAIL PROTECTED] . The
supported speeds now are: 64k, 128k and 256k.
The questions now
are the following:
1. How can we
control specific user names (through profiles maybe) to login using a specific
sub-domain (ie. 64k.domain.net)? So, if he attempts to login using
256k.domain.net he will be denied access because of incorrect
username/password. We also need this to be done using profiles on Rodopi and
not the profiles.txt of Vircom Radius.
2. How can we
control Digital vs. Analog to control Dial-ups and ADSLs access? Again this
needs to be done from Rodopi profiles and NOT Radius profiles.txt
file.
3. Also how can we
control user logins through DNIS using Rodopi profiles and not Vircom Radius
profiles.txt ?
4. Currently, my
dial-up users login without the use of the domain name. Can we allow dial-up
to continue without domain name while forcing ADSLs to login with domain names
as explained above ?
We are in URGENT
need for assistance on the above items. Pls get back to us with any assistance
or hints you might have on the above issues.
Regards..
---
Kais Al-Essa, Operations &
Technical Services Manager
