I don't know where you all get your power or why you think there will be a
grid to sell power to, if we all get FE devices?

In Texas where I live, with all the charges and fees I pay ~ 38 cents/kwh.
Now in the summer when using AC I need a device with a capacity for a surge
of some 38kw, why, well when AC starts it can demand from 3 to 4 times its
running power during start period. A device that would supply the constant
load of 4kw+3kw for two AC units would not be of any real value here. My
average consumption is 18kw/24hrs and that is a minimum of a refer, freezer
and lights and TV. My hot water is gas.

SO unless you all live by oil lamp or candle, what do you plan on selling
back? Lets see 50hp X 746 = 3.73E4 or 37,300 watts nice if it could run a
genset at 100%/ 24/7? Nice, but show me its real and you could avoid the
politicians.

> -----Original Message-----
> From: Hoyt A. Stearns Jr. [mailto:[EMAIL PROTECTED]
> Sent: Thursday, February 01, 2007 4:52 PM
> To: vortex-l@eskimo.com
> Subject: RE: [Vo]: Now what? An important theoretical question.
>
>
>
> Rather than taking off the grid, put power back into the grid.
>
> I think the cost would be much less.  Get a 50 HP Steorn motor (and I now
> think I understand how it works,
> and it's simple), and drive a cheap surplus 50 HP induction motor above
> synchronous speed (induction generator). Your power meter will run
> backwards (I've tried it).  You get to send the power company a bill for
> US$60.00/day :-) No electronics required unless you want the disconnect
> feature the power company requires
> to prevent back feeding in case of line down conditions.   Even
> without the
> grid connection, an induction generator
> can be made to work with some capacitors (tried that too).
>
> Hoyt Stearns
> Scottsdale, Arizona US
>
>
> -----Original Message-----
> From: Terry Blanton [mailto:[EMAIL PROTECTED]
> Sent: Thursday, February 01, 2007 3:28 PM
>
> Recently I was asked what a demonstation unit would cost to take a
> home off grid with a 2kW FE device that does not output 120 VAC @ 60
> Hz.  My initial estimates, including a proprietary FE device was $60k.
>  Payback is now 34 years.
>
>
>

Reply via email to